Message-ID: <d25666da-8df2-dd6d-16cc-38b486c64f8f@kernel.org>
Date:   Fri, 14 Jul 2023 23:51:06 +1000
From:   Greg Ungerer <gerg@...nel.org>
To:     Stefan O'Rear <sorear@...tmail.com>,
        linux-riscv@...ts.infradead.org, linux-mm@...ck.org,
        linux-kernel@...r.kernel.org
Cc:     Palmer Dabbelt <palmer@...belt.com>, viro@...iv.linux.org.uk,
        ebiederm@...ssion.com, Kees Cook <keescook@...omium.org>,
        brauner@...nel.org
Subject: Re: [PATCH v2 2/2] riscv: support the elf-fdpic binfmt loader


On 14/7/23 00:26, Stefan O'Rear wrote:
> On Thu, Jul 13, 2023, at 9:17 AM, Greg Ungerer wrote:
>> On 13/7/23 01:12, Stefan O'Rear wrote:
>>> On Tue, Jul 11, 2023, at 9:07 AM, Greg Ungerer wrote:
>>>> Add support for enabling and using the binfmt_elf_fdpic program loader
>>>> on RISC-V platforms. The most important change is to setup registers
>>>> during program load to pass the mapping addresses to the new process.
>>>>
>>>> One of the interesting features of the elf-fdpic loader is that it
>>>> also allows appropriately compiled ELF format binaries to be loaded on
>>>> nommu systems. Appropriate being those compiled with -pie.
>>>>
>>>> Signed-off-by: Greg Ungerer <gerg@...nel.org>
>>>> ---
>>>> v1->v2: rebase onto linux-6.5-rc1
>>>>           increment PTRACE_GETFDPIC value to keep it unique
>>>>
>>>>    arch/riscv/include/asm/elf.h         | 11 ++++++++++-
>>>>    arch/riscv/include/asm/mmu.h         |  4 ++++
>>>>    arch/riscv/include/uapi/asm/ptrace.h |  5 +++++
>>>>    fs/Kconfig.binfmt                    |  2 +-
>>>>    4 files changed, 20 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h
>>>> index c24280774caf..c33fe923ef6d 100644
>>>> --- a/arch/riscv/include/asm/elf.h
>>>> +++ b/arch/riscv/include/asm/elf.h
>>>> @@ -41,6 +41,7 @@ extern bool compat_elf_check_arch(Elf32_Ehdr *hdr);
>>>>    #define compat_elf_check_arch	compat_elf_check_arch
>>>>
>>>>    #define CORE_DUMP_USE_REGSET
>>>> +#define ELF_FDPIC_CORE_EFLAGS	0
>>>>    #define ELF_EXEC_PAGESIZE	(PAGE_SIZE)
>>>>
>>>>    /*
>>>> @@ -69,6 +70,13 @@ extern bool compat_elf_check_arch(Elf32_Ehdr *hdr);
>>>>    #define ELF_HWCAP	riscv_get_elf_hwcap()
>>>>    extern unsigned long elf_hwcap;
>>>>
>>>> +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,
>>>> dynamic_addr) \
>>>> +	do { \
>>>> +		(_r)->a1 = _exec_map_addr; \
>>>> +		(_r)->a2 = _interp_map_addr; \
>>>> +		(_r)->a3 = dynamic_addr; \
>>>> +	} while (0)
>>>> +
>>>
>>> This should probably be left empty for now; it will be defined by the
>>> ELF FDPIC ABI when that is done, and shouldn't be used by normal ELF
>>> binaries.
>>
>> True, not used by the ELF binaries themselves. But used by an ELF
>> interpreter to do the runtime relocations.
> 
> By "normal ELF binaries", I mean binaries (executables and shared libraries
> with nonzero e_entry, including statically linked binaries and the dynamic
> linker itself) that conform to the psABI as it currently exists in
> riscv-elf-psabi-doc.
> 
> These binaries don't use load maps because they aren't defined in
> riscv-elf-psabi-doc yet.  At some point in the future, riscv-elf-psabi-doc
> may define a FDPIC EI_OSABI value and rules for its usage; "FDPIC ELF
> binaries" will not be "normal" and you will not be able to load them with
> binfmt_elf or binfmt_elf_compat.
>
> "FDPIC elf binaries" which contain their own self-relocation code, including
> the dynamic linker and statically linked binaries, will use the map and
> dynamic addresses.

Well, yes, none of that is specific to RISC-V though. Those same rules apply to
FDPIC binaries on any architecture that supports it. FDPIC binaries can only
be loaded by binfmt_elf_fdpic.

The point I was trying to make is that with a normal ELF binary (with obvious
limitations in the noMMU case - needs to be PIE, and not using shared libraries,
etc) if those mappings are present a specially crafted ELF interpreter can
use them to carry out the relocations and start that ELF binary. That ELF
binary is not special and can be loaded and run by the the standard binfmt_elf
ELF loader on an a fully MMU system (of course using the usual ELF interpreter
on that system not the different noMMU one).


> elf_check_fdpic will return 1 for binaries that use the FDPIC EI_OSABI and
> use the load maps as part of either their own or their interpreter's
> startup code.  For binaries where elf_check_fdpic returns 0, the contents
> of ELF_FDPIC_PLAT_INIT is (harmless) dead stores.

I don't follow. On other architectures that binfmt_elf-fdpic supoprts (so ARM,
SH, M68K currently; historically some other removed architectures too) the
contents of ELF_FDPIC_PLAT_INIT are always run if defined. Even in the case of
loading a standard ELF binary. Those mappings are loaded into some registers
and those appear in the running process on startup.


> We don't have an implementation of elf_check_fdpic yet, which means that
> we cannot load binaries that actually use the load maps and the
> ELF_FDPIC_PLAT_INIT is dead code.  Dead code which is unlikely to conform
> to the future ABI, since the RISC-V psABI Task Group has yet to choose
> which registers to use to pass the load maps.  Since the code is dead and
> likely wrong, it should be removed so that correct code can be added at
> the correct time.

I understand your reluctance here.

Regards
Greg


> -s
> 
>>> I'd ask if there's a reason it starts at a1 instead of a0,
>>> but it seems idiosyncratic on all arches that have full FDPIC support.
>>
>> This comment in the crt1.S code of uClibc made me think that a0 already had
>> a pre-defined use in the ABI:
>>
>>       /* The entry point's job is to call __uClibc_main.  Per the ABI,
>>          a0 contains the address of a function to be passed to atexit.
>>
>> But I didn't dig any further than that.
>>
>> Regards
>> Greg
>>
>>
>>> -s
>>>
>>>>    /*
>>>>     * This yields a string that ld.so will use to load implementation
>>>>     * specific libraries for optimization.  This is more specific in
>>>> @@ -78,7 +86,6 @@ extern unsigned long elf_hwcap;
>>>>
>>>>    #define COMPAT_ELF_PLATFORM	(NULL)
>>>>
>>>> -#ifdef CONFIG_MMU
>>>>    #define ARCH_DLINFO						\
>>>>    do {								\
>>>>    	/*							\
>>>> @@ -115,6 +122,8 @@ do {								\
>>>>    	else							 \
>>>>    		NEW_AUX_ENT(AT_IGNORE, 0);			 \
>>>>    } while (0)
>>>> +
>>>> +#ifdef CONFIG_MMU
>>>>    #define ARCH_HAS_SETUP_ADDITIONAL_PAGES
>>>>    struct linux_binprm;
>>>>    extern int arch_setup_additional_pages(struct linux_binprm *bprm,
>>>> diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
>>>> index 0099dc116168..355504b37f8e 100644
>>>> --- a/arch/riscv/include/asm/mmu.h
>>>> +++ b/arch/riscv/include/asm/mmu.h
>>>> @@ -20,6 +20,10 @@ typedef struct {
>>>>    	/* A local icache flush is needed before user execution can resume. */
>>>>    	cpumask_t icache_stale_mask;
>>>>    #endif
>>>> +#ifdef CONFIG_BINFMT_ELF_FDPIC
>>>> +	unsigned long exec_fdpic_loadmap;
>>>> +	unsigned long interp_fdpic_loadmap;
>>>> +#endif
>>>>    } mm_context_t;
>>>>
>>>>    void __init create_pgd_mapping(pgd_t *pgdp, uintptr_t va, phys_addr_t
>>>> pa,
>>>> diff --git a/arch/riscv/include/uapi/asm/ptrace.h
>>>> b/arch/riscv/include/uapi/asm/ptrace.h
>>>> index e17c550986a6..30f6d6537adc 100644
>>>> --- a/arch/riscv/include/uapi/asm/ptrace.h
>>>> +++ b/arch/riscv/include/uapi/asm/ptrace.h
>>>> @@ -10,6 +10,11 @@
>>>>
>>>>    #include <linux/types.h>
>>>>
>>>> +#define PTRACE_GETFDPIC		33
>>>> +
>>>> +#define PTRACE_GETFDPIC_EXEC	0
>>>> +#define PTRACE_GETFDPIC_INTERP	1
>>>> +
>>>>    /*
>>>>     * User-mode register state for core dumps, ptrace, sigcontext
>>>>     *
>>>> diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
>>>> index 93539aac0e5b..f5693164ca9a 100644
>>>> --- a/fs/Kconfig.binfmt
>>>> +++ b/fs/Kconfig.binfmt
>>>> @@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
>>>>    config BINFMT_ELF_FDPIC
>>>>    	bool "Kernel support for FDPIC ELF binaries"
>>>>    	default y if !BINFMT_ELF
>>>> -	depends on ARM || ((M68K || SUPERH || XTENSA) && !MMU)
>>>> +	depends on ARM || ((M68K || RISCV || SUPERH || XTENSA) && !MMU)
>>>>    	select ELFCORE
>>>>    	help
>>>>    	  ELF FDPIC binaries are based on ELF, but allow the individual load
>>>> -- 
>>>> 2.25.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-riscv mailing list
>>>> linux-riscv@...ts.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv

Powered by blists - more mailing lists