[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a2d362d0-3a58-0835-5106-fb60f0c3e4d0@linaro.org>
Date: Sat, 15 Jul 2023 15:20:05 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Imran Shaik <quic_imrashai@...cinc.com>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Taniya Das <quic_tdas@...cinc.com>,
Melody Olvera <quic_molvera@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Jagadeesh Kona <quic_jkona@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Ajit Pandey <quic_ajipan@...cinc.com>
Subject: Re: [PATCH V3 4/6] clk: qcom: gcc-qdu1000: Update GCC clocks as per
the latest hw version
On 6.07.2023 12:50, Imran Shaik wrote:
> Update the GCC clocks as per the latest hw version of QDU1000 and
> QRU100 SoCs.
>
> Co-developed-by: Taniya Das <quic_tdas@...cinc.com>
> Signed-off-by: Taniya Das <quic_tdas@...cinc.com>
> Signed-off-by: Imran Shaik <quic_imrashai@...cinc.com>
> ---
> Changes since v2:
> - Split the patch as per the review comments
> - Newly added
>
> drivers/clk/qcom/gcc-qdu1000.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
> index 8df7b7983968..991fb2bc97e9 100644
> --- a/drivers/clk/qcom/gcc-qdu1000.c
> +++ b/drivers/clk/qcom/gcc-qdu1000.c
> @@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
> },
> };
>
> +static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
> + .halt_reg = 0x54298,
> + .halt_check = BRANCH_HALT_VOTED,
> + .hwcg_reg = 0x54298,
> + .hwcg_bit = 1,
> + .clkr = {
> + .enable_reg = 0x54298,
> + .enable_mask = BIT(0),
> + .hw.init = &(const struct clk_init_data) {
> + .name = "gcc_ddrss_ecpri_gsi_clk",
> + .parent_hws = (const struct clk_hw*[]) {
> + &gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_aon_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_ecpri_ahb_clk = {
> .halt_reg = 0x3a008,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -2521,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
> [GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
> [GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
> [GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
> + [GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
Looks like you split it too much.. this clock is not being defined in this patch.
Konrad
> + [GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
> };
>
> static const struct qcom_reset_map gcc_qdu1000_resets[] = {
Powered by blists - more mailing lists