| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230715195156.fahd2btntvbqpd66@pengutronix.de>
Date: Sat, 15 Jul 2023 21:51:56 +0200
From: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To: Ben Dooks <ben.dooks@...ive.com>
Cc: linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ben.dooks@...ethink.co.uk,
Thierry Reding <thierry.reding@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Greentime Hu <greentime.hu@...ive.com>,
jarkko.nikula@...ux.intel.com,
William Salmon <william.salmon@...ive.com>,
Jude Onyenegecha <jude.onyenegecha@...ive.com>
Subject: Re: [PATCH v8 5/5] pwm: dwc: add of/platform support
On Wed, Jun 14, 2023 at 06:14:57PM +0100, Ben Dooks wrote:
> The dwc pwm controller can be used in non-PCI systems, so allow
> either platform or OF based probing.
A document describing the binding is needed here.
>
> Signed-off-by: Ben Dooks <ben.dooks@...ive.com>
> ---
> v8:
> - add compile test for of-case
> - add module namespace
> - move later in the series
> v7:
> - fixup kconfig from previous pcie changes
> v5:
> - fix missing " in kconfig
> - remove .remove method, devm already sorts this.
> - merge pwm-number code
> - split the of code out of the core
> - get bus clock
> v4:
> - moved the compile test code earlier
> - fixed review comments
> - used NS_PER_SEC
> - use devm_clk_get_enabled
> - ensure we get the bus clock
> v3:
> - changed compatible name
> ---
> drivers/pwm/Kconfig | 10 +++++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-dwc-core.c | 6 +++
> drivers/pwm/pwm-dwc-of.c | 78 ++++++++++++++++++++++++++++++++++++++
> drivers/pwm/pwm-dwc.c | 1 +
> drivers/pwm/pwm-dwc.h | 1 +
> 6 files changed, 97 insertions(+)
> create mode 100644 drivers/pwm/pwm-dwc-of.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 7c54cdcb97a0..61f5d3f30fd7 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -205,6 +205,16 @@ config PWM_DWC
> To compile this driver as a module, choose M here: the module
> will be called pwm-dwc.
>
> +config PWM_DWC_OF
> + tristate "DesignWare PWM Controller (OF bus)"
> + depends on HAS_IOMEM && (OF || COMPILE_TEST)
> + select PWM_DWC_CORE
> + help
> + PWM driver for Synopsys DWC PWM Controller on an OF bus.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-dwc-of.
> +
> config PWM_EP93XX
> tristate "Cirrus Logic EP93xx PWM support"
> depends on ARCH_EP93XX || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index de3ed77e8d7c..d27dfbb850b7 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_PWM_CRC) += pwm-crc.o
> obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
> obj-$(CONFIG_PWM_DWC_CORE) += pwm-dwc-core.o
> obj-$(CONFIG_PWM_DWC) += pwm-dwc.o
> +obj-$(CONFIG_PWM_DWC_OF) += pwm-dwc-of.o
> obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
> obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
> obj-$(CONFIG_PWM_HIBVT) += pwm-hibvt.o
> diff --git a/drivers/pwm/pwm-dwc-core.c b/drivers/pwm/pwm-dwc-core.c
> index 0f07e26e6c30..ed102fc4b30a 100644
> --- a/drivers/pwm/pwm-dwc-core.c
> +++ b/drivers/pwm/pwm-dwc-core.c
> @@ -16,6 +16,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/pci.h>
> +#include <linux/clk.h>
> #include <linux/pm_runtime.h>
> #include <linux/pwm.h>
>
> @@ -44,6 +45,9 @@ static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
> u32 high;
> u32 low;
>
> + if (dwc->clk)
> + dwc->clk_rate = clk_get_rate(dwc->clk);
> +
> /*
> * Calculate width of low and high period in terms of input clock
> * periods and check are the result within HW limits between 1 and
> @@ -128,6 +132,8 @@ static int dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
>
> pm_runtime_get_sync(chip->dev);
>
> + if (dwc->clk)
> + dwc->clk_rate = clk_get_rate(dwc->clk);
> clk_rate = dwc->clk_rate;
>
> ctrl = dwc_pwm_readl(dwc, DWC_TIM_CTRL(pwm->hwpwm));
> diff --git a/drivers/pwm/pwm-dwc-of.c b/drivers/pwm/pwm-dwc-of.c
> new file mode 100644
> index 000000000000..13a0b534b383
> --- /dev/null
> +++ b/drivers/pwm/pwm-dwc-of.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DesignWare PWM Controller driver OF
> + *
> + * Copyright (C) 2022 SiFive, Inc.
> + */
> +
> +#define DEFAULT_MODULE_NAMESACE dwc_pwm
missing P? I'd have put this into drivers/pwm/pwm-dwc.h.
> +
> +#include <linux/bitops.h>
> +#include <linux/export.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pwm.h>
> +#include <linux/io.h>
> +
> +#include "pwm-dwc.h"
> +
> +static int dwc_pwm_plat_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct dwc_pwm *dwc;
> + struct clk *bus;
> + u32 nr_pwm;
> +
> + dwc = dwc_pwm_alloc(dev);
> + if (!dwc)
> + return -ENOMEM;
> +
> + if (!device_property_read_u32(dev, "snps,pwm-number", &nr_pwm)) {
> + if (nr_pwm > DWC_TIMERS_TOTAL)
> + dev_err(dev, "too many PWMs (%d) specified, capping at %d\n",
> + nr_pwm, dwc->chip.npwm);
> + else
> + dwc->chip.npwm = nr_pwm;
> + }
> +
> + dwc->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dwc->base))
> + return PTR_ERR(dwc->base);
> +
> + bus = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(bus))
> + return dev_err_probe(dev, PTR_ERR(bus),
> + "failed to get clock\n");
> +
> + dwc->clk = devm_clk_get_enabled(dev, "timer");
> + if (IS_ERR(dwc->clk))
> + return dev_err_probe(dev, PTR_ERR(dwc->clk),
> + "failed to get timer clock\n");
> +
> + dwc->clk_rate = clk_get_rate(dwc->clk);
Do you need this here? Isn't clk_rate assigned each time it's used when
clk != NULL?
> + return devm_pwmchip_add(dev, &dwc->chip);
> +}
> +
> +static const struct of_device_id dwc_pwm_dt_ids[] = {
> + { .compatible = "snps,dw-apb-timers-pwm2" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, dwc_pwm_dt_ids);
> +
> +static struct platform_driver dwc_pwm_plat_driver = {
> + .driver = {
> + .name = "dwc-pwm",
> + .of_match_table = dwc_pwm_dt_ids,
> + },
> + .probe = dwc_pwm_plat_probe,
> +};
> +
> +module_platform_driver(dwc_pwm_plat_driver);
> +
> +MODULE_ALIAS("platform:dwc-pwm-of");
> +MODULE_AUTHOR("Ben Dooks <ben.dooks@...ive.com>");
Given that this email address is (or soon will be) unavailable, maybe
better put your codethink address here?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists