linux-kernel - Re: [PATCH v4 3/3] riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZLV2vqycWIA5TanD@aurel32.net>
Date:   Mon, 17 Jul 2023 19:13:34 +0200
From:   Aurelien Jarno <aurelien@...el32.net>
To:     William Qiu <william.qiu@...rfivetech.com>
Cc:     devicetree@...r.kernel.org, linux-spi@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
        Mark Brown <broonie@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Emil Renner Berthing <kernel@...il.dk>,
        Ziv Xu <ziv.xu@...rfivetech.com>
Subject: Re: [PATCH v4 3/3] riscv: dts: starfive: Add QSPI controller node
 for StarFive JH7110 SoC

Hi,

On 2023-07-04 17:04, William Qiu wrote:
> Add the quad spi controller node for the StarFive JH7110 SoC.
> 
> Co-developed-by: Ziv Xu <ziv.xu@...rfivetech.com>
> Signed-off-by: Ziv Xu <ziv.xu@...rfivetech.com>
> Signed-off-by: William Qiu <william.qiu@...rfivetech.com>
> Reviewed-by: Hal Feng <hal.feng@...rfivetech.com>
> ---
>  .../jh7110-starfive-visionfive-2.dtsi         | 32 +++++++++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 18 +++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 2a6d81609284..983b683e2f27 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -126,6 +126,38 @@ &i2c6 {
>  	status = "okay";
>  };
>  
> +&qspi {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	nor_flash: flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		cdns,read-delay = <5>;
> +		spi-max-frequency = <12000000>;
> +		cdns,tshsl-ns = <1>;
> +		cdns,tsd2d-ns = <1>;
> +		cdns,tchsh-ns = <1>;
> +		cdns,tslch-ns = <1>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			spl@0 {
> +				reg = <0x0 0x20000>;
> +			};
> +			uboot@...000 {
> +				reg = <0x100000 0x300000>;
> +			};
> +			data@...000 {
> +				reg = <0xf00000 0x100000>;
> +			};

It appears that this uses the old layout for the SPI flash. The new
layout is described there:

https://doc-en.rvspace.org/VisionFive2/Boot_UG/JH7110_SDK/boot_address_allocation.html

Regards
Aurelien

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@...el32.net                     http://aurel32.net