Message-ID: <865y6ivpg3.wl-maz@kernel.org>
Date:   Mon, 17 Jul 2023 10:48:28 +0100
From:   Marc Zyngier <maz@...nel.org>
To:     Anup Patel <apatel@...tanamicro.com>
Cc:     Anup Patel <anup@...infault.org>,
        Saravana Kannan <saravanak@...gle.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Atish Patra <atishp@...shpatra.org>,
        Andrew Jones <ajones@...tanamicro.com>,
        Sunil V L <sunilvl@...tanamicro.com>,
        Conor Dooley <conor@...nel.org>,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v5 7/9] irqchip: Add RISC-V advanced PLIC driver

On Mon, 17 Jul 2023 10:05:01 +0100,
Anup Patel <apatel@...tanamicro.com> wrote:
> 
> On Mon, Jul 17, 2023 at 1:35 PM Marc Zyngier <maz@...nel.org> wrote:
> >
> > On Fri, 14 Jul 2023 15:05:07 +0100,
> > Anup Patel <anup@...infault.org> wrote:
> > >
> > > On Fri, Jul 14, 2023 at 7:05 PM Marc Zyngier <maz@...nel.org> wrote:
> > > >
> > > > On Fri, 14 Jul 2023 10:35:34 +0100,
> > > > Anup Patel <apatel@...tanamicro.com> wrote:
> > > > >
> > > > > On Fri, Jul 14, 2023 at 2:31 PM Marc Zyngier <maz@...nel.org> wrote:
> > > > > >
> > > > > > Anup,
> > > > > >
> > > > > > On Fri, 14 Jul 2023 00:56:22 +0100,
> > > > > > Saravana Kannan <saravanak@...gle.com> wrote:
> > > > > > >
> > > > > > > On Mon, Jul 10, 2023 at 2:44 AM Anup Patel <apatel@...tanamicro.com> wrote:
> > > > > > > >
> > > > > > > > The RISC-V advanced interrupt architecture (AIA) specification defines
> > > > > > > > a new interrupt controller for managing wired interrupts on a RISC-V
> > > > > > > > platform. This new interrupt controller is referred to as advanced
> > > > > > > > platform-level interrupt controller (APLIC) which can forward wired
> > > > > > > > interrupts to CPUs (or HARTs) as local interrupts OR as message
> > > > > > > > signaled interrupts.
> > > > > > > > (For more details refer https://github.com/riscv/riscv-aia)
> > > > > > > >
> > > > > > > > This patch adds an irqchip driver for RISC-V APLIC found on RISC-V
> > > > > > > > platforms.
> > > > > > > >
> > > > > > > > Signed-off-by: Anup Patel <apatel@...tanamicro.com>
> > > > > >
> > > > > > [...]
> > > > > >
> > > > > > > > +static int __init aplic_dt_init(struct device_node *node,
> > > > > > > > +                               struct device_node *parent)
> > > > > > > > +{
> > > > > > > > +       /*
> > > > > > > > +        * The APLIC platform driver needs to be probed early
> > > > > > > > +        * so for device tree:
> > > > > > > > +        *
> > > > > > > > +        * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which
> > > > > > > > +        *    provides a hint to the device driver core to probe the
> > > > > > > > +        *    platform driver early.
> > > > > > > > +        * 2) Clear the OF_POPULATED flag in device_node because
> > > > > > > > +        *    of_irq_init() sets it which prevents creation of
> > > > > > > > +        *    platform device.
> > > > > > > > +        */
> > > > > > > > +       node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT;
> > > > > > >
> > > > > > > Please stop spamming us with broken patches. Already told you this is
> > > > > > > not an option.
> > > > > > >
> > > > > > > Nack.
> > > > > >
> > > > > > What puzzles me here is that *no other arch* requires this sort of
> > > > > > hack. What is so special about the APLIC that it requires it? I see
> > > > > > nothing in this patch that even hints at it, despite the "discussion"
> > > > > > in the last round.
> > > > > >
> > > > > > The rules are simple:
> > > > > >
> > > > > > - either the APLIC is so fundamental to the system that it has to be
> > > > > >   initialised super early, much like the GIC on arm64, at which point
> > > > > >   it cannot be a platform device, and the story is pretty simple.
> > > > > >
> > > > > > - or it isn't that fundamental, and it can be probed as a platform
> > > > > >   device using the dependency infrastructure that is already used by
> > > > > >   multiple other interrupt controller drivers, without any need to
> > > > > >   mess with internal flags. Again, this should be simple enough.
> > > > >
> > > > > APLIC manages all wired interrupts whereas IMSIC manages all
> > > > > MSIs. Both APLIC and IMSIC are fundamental devices which need
> > > > > to be probed super early.
> > > > >
> > > > > Now APLIC has two modes of operations:
> > > > > 1) Direct mode where there is no IMSIC in the system and APLIC
> > > > >     directly injects interrupt to CPUs
> > > > > 2) MSI mode where IMSIC is present in the system and APLIC
> > > > >     converts wired interrupts into MSIs
> > > > >
> > > > > The APLIC driver added by this patch is a common driver for
> > > > > both above modes.
> > > >
> > > > Which it doesn't need to be. You are pointlessly making life difficult
> > > > for yourself, and everyone else. The MSI bridge behaviour has *zero*
> > > > reason to be the same driver as the main "I need it super early"
> > > > driver. They may be called the same, but they *are* different things
> > > > in the system.
> > > >
> > > > They can share code, but they are fundamentally a different thing in
> > > > the system. And I guess this silly approach has other ramifications:
> > > > the IMSIC is also some early driver when it really doesn't need to be.
> > > > Who needs MSIs that early in the life of the system? I don't buy this
> > > > for even a second.
> > >
> > > IMSIC also provides IPIs which are required super early so I think
> > > we can't make IMSIC as a platform driver.
> >
> > Then split this part further. Just because the architecture lumps two
> > completely unrelated concepts together doesn't mean we need to follow
> > the same organisation.
> 
> IPIs are supported as software injected MSIs. Basically, each HART
> has its own MSI controller and one HART can inject IPI to other HART
> by writing its MSI MMIO register.
> 
> >
> > >
> > > >
> > > > Frankly, this whole thing needs to be taken apart and rebuilt from the
> > > > ground up.
> > > >
> > > > > For #2, APLIC needs to be a platform device to create a device
> > > > > MSI domain using platform_msi_create_device_domain() which
> > > > > is why the APLIC driver is a platform driver.
> > > >
> > > > You can't have your cake and eat it. If needed super early, and it
> > > > cannot be a platform driver. End of the story.
> > > >
> > > > And to my earlier point: IMSIC and APLIC-as-MSI-bridge have no purpose
> > > > being early drivers. They must be platform drivers, and only that.
> > >
> > > We can have IMSIC and APLIC-Direct-Mode as non-platform driver
> > > whereas APLIC-as-MSI-bridge will be a platform driver.
> > >
> > > Both APLIC-Direct-Mode and APLIC-as-MSI-bridge can share a large
> > > part of the current driver.
> > >
> > > >
> > > > > > If these rules don't apply to your stuff, please explain what is so
> > > > > > different. And I mean actually explain the issue. Which isn't telling
> > > > > > us "it doesn't work without it". Because as things stand, there is no
> > > > > > way I will even consider taking this ugly mix of probing methods.
> > > > >
> > > > > Yes, I don't want this ugly FWNODE_FLAG_BEST_EFFORT hack
> > > > > in this driver.
> > > >
> > > > And yet you are hammering it even when told this is wrong.
> > > >
> > > > > I tried several things but setting the FWNODE_FLAG_BEST_EFFORT
> > > > > flag is the only thing which works right now.
> > > >
> > > > How about you take a step back and realise that the way you've
> > > > architected your drivers makes little sense? I don't think you have
> > > > tried *that*.
> > >
> > > Both APLIC and IMSIC are separate devices as defined by the AIA spec.
> > >
> > > There are three possible systems:
> > > 1) Systems with only APLIC (i.e. only wired interrupts)
> > > 2) Systems with only IMSIC (i.e. only MSIs)
> >
> > How is that possible? Are you saying that even things like timers are
> > firing as MSIs?
> 
> No, timer interrupts are triggered through INTC.

So all the above is BS. All you need is timers and IPIs to be
supported early.  Everything else can be postponed until you probe the
rest of the interrupt hierarchy.

	M.

-- 
Without deviation from the norm, progress is not possible.

Powered by blists - more mailing lists