[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230717120603.5053-1-rohan.g.thomas@intel.com>
Date: Mon, 17 Jul 2023 20:06:03 +0800
From: Rohan G Thomas <rohan.g.thomas@...el.com>
To: "David S . Miller" <davem@...emloft.net>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rohan G Thomas <rohan.g.thomas@...el.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH net-next 1/1] net: stmmac: xgmac: Fix L3L4 filter count
Get the exact count of L3L4 filters when the L3L4FNUM field of
HW_FEATURE1 register is >= 8. If L3L4FNUM < 8, then the number of L3L4
filters supported by XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8
the number of L3L4 filters goes on like 8, 16, 32, ... Current
maximum of L3L4FNUM = 10.
Also, fix the XGMAC_IDDR bitmask of L3L4_ADDR_CTRL register. IDDR
field starts from the 8th bit of the L3L4_ADDR_CTRL register. IDDR[3:0]
indicates the type of L3L4 filter register while IDDR[8:4] indicates
the filter number (0 to 31). So overall 9 bits are used for IDDR
(i.e. L3L4_ADDR_CTRL[16:8]) to address the registers of all the
filters. Currently, XGMAC_IDDR is GENMASK(15,8), causing issues
accessing L3L4 filters above 15 for those XGMACs configured with more
than 16 L3L4 filters.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@...el.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 10 ++++++++++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 1913385df685..153321fe42c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -165,7 +165,7 @@
#define XGMAC_DCS_SHIFT 16
#define XGMAC_ADDRx_LOW(x) (0x00000304 + (x) * 0x8)
#define XGMAC_L3L4_ADDR_CTRL 0x00000c00
-#define XGMAC_IDDR GENMASK(15, 8)
+#define XGMAC_IDDR GENMASK(16, 8)
#define XGMAC_IDDR_SHIFT 8
#define XGMAC_IDDR_FNUM 4
#define XGMAC_TT BIT(1)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 070bd912580b..df5af52fd1a1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -408,6 +408,16 @@ static int dwxgmac2_get_hw_feature(void __iomem *ioaddr,
/* MAC HW feature 1 */
hw_cap = readl(ioaddr + XGMAC_HW_FEATURE1);
dma_cap->l3l4fnum = (hw_cap & XGMAC_HWFEAT_L3L4FNUM) >> 27;
+ /* If L3L4FNUM < 8, then the number of L3L4 filters supported by
+ * XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8 the number of
+ * L3L4 filters goes on like 8, 16, 32, ... Current maximum of
+ * L3L4FNUM = 10.
+ */
+ if (dma_cap->l3l4fnum >= 8 && dma_cap->l3l4fnum <= 10)
+ dma_cap->l3l4fnum = 8 << (dma_cap->l3l4fnum - 8);
+ else if (dma_cap->l3l4fnum > 10)
+ dma_cap->l3l4fnum = 32;
+
dma_cap->hash_tb_sz = (hw_cap & XGMAC_HWFEAT_HASHTBLSZ) >> 24;
dma_cap->rssen = (hw_cap & XGMAC_HWFEAT_RSSEN) >> 20;
dma_cap->tsoen = (hw_cap & XGMAC_HWFEAT_TSOEN) >> 18;
--
2.26.2
Powered by blists - more mailing lists