linux-kernel - [PATCH] thermal/drivers/sun8i: Don't fail probe due to zone registration failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230718-thermal-sun8i-registration-v1-1-c95b1b070340@kernel.org>
Date:   Tue, 18 Jul 2023 16:04:22 +0100
From:   Mark Brown <broonie@...nel.org>
To:     Vasily Khoruzhick <anarsoul@...il.com>,
        Yangtao Li <tiny.windzz@...il.com>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Amit Kucheria <amitk@...nel.org>,
        Zhang Rui <rui.zhang@...el.com>, Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Samuel Holland <samuel@...lland.org>
Cc:     Hugh Dickins <hughd@...gle.com>, linux-pm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
        linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>
Subject: [PATCH] thermal/drivers/sun8i: Don't fail probe due to zone
 registration failure

Currently the sun8i thermal driver will fail to probe if any of the
thermal zones it is registering fails to register with the thermal core.
Since we currently do not define any trip points for the GPU thermal
zones on at least A64 or H5 this means that we have no thermal support
on these platforms:

[    1.698703] thermal_sys: Failed to find 'trips' node
[    1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1

even though the main CPU thermal zone on both SoCs is fully configured.
This does not seem ideal, while we may not be able to use all the zones
it seems better to have those zones which are usable be operational.
Instead just carry on registering zones if we get any non-deferral
error, allowing use of those zones which are usable.

This means that we also need to update the interrupt handler to not
attempt to notify the core for events on zones which we have not
registered, I didn't see an ability to mask individual interrupts and
I would expect that interrupts would still be indicated in the ISR even
if they were masked.

Signed-off-by: Mark Brown <broonie@...nel.org>
---
I noticed this while trying to debug an issue with memory corruption on
boot which since the merge window has prevented Pine64 Plus (an A64)
from booting at all:

   https://storage.kernelci.org/mainline/master/v6.5-rc2/arm64/defconfig/gcc-10/lab-baylibre/baseline-sun50i-a64-pine64-plus.txt

(which I bisected to a random memory management change that clearly
wasn't at fault) and has been causing less consistent but still very
severe boot issues on Libretech Tritium (a H3).  The corruption appears
to happen when unbinding a the one thermal zone that does register, I've
not figured out exactly where.

The memory corruption issue obviously needs to be dealt with properly
(I'm still digging into it) but this does allow both platforms to boot
reliably and seems like a sensible thing to do independently, ideally we
could get this in as a fix.
---
 drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 195f3c5d0b38..b69134538867 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -190,6 +190,9 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	int i;
 
 	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+		/* We allow some zones to not register. */
+		if (IS_ERR(tmdev->sensor[i].tzd))
+			continue;
 		thermal_zone_device_update(tmdev->sensor[i].tzd,
 					   THERMAL_EVENT_UNSPECIFIED);
 	}
@@ -465,8 +468,17 @@ static int sun8i_ths_register(struct ths_device *tmdev)
 						      i,
 						      &tmdev->sensor[i],
 						      &ths_ops);
-		if (IS_ERR(tmdev->sensor[i].tzd))
-			return PTR_ERR(tmdev->sensor[i].tzd);
+
+		/*
+		 * If an individual zone fails to register for reasons
+		 * other than probe deferral (eg, a bad DT) then carry
+		 * on, other zones might register successfully.
+		 */
+		if (IS_ERR(tmdev->sensor[i].tzd)) {
+			if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER)
+				return PTR_ERR(tmdev->sensor[i].tzd);
+			continue;
+		}
 
 		devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
 	}

---
base-commit: fdf0eaf11452d72945af31804e2a1048ee1b574c
change-id: 20230718-thermal-sun8i-registration-df3a136ccafa

Best regards,
-- 
Mark Brown <broonie@...nel.org>