[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230718-jitters-excretion-fe18c820c102@spud>
Date: Tue, 18 Jul 2023 16:50:24 +0100
From: Conor Dooley <conor@...nel.org>
To: Sai Krishna Potthuri <sai.krishna.potthuri@....com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Michal Simek <michal.simek@....com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Tanmay Shah <tanmay.shah@....com>,
Ben Levinsky <ben.levinsky@....com>,
Marek Vasut <marex@...x.de>,
Roman Gushchin <roman.gushchin@...ux.dev>,
Arnd Bergmann <arnd@...db.de>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
saikrishna12468@...il.com, git@....com
Subject: Re: [PATCH 3/4] dt-bindings: pinctrl-zynqmp: Add output-enable
configuration
On Mon, Jul 17, 2023 at 03:03:46PM +0530, Sai Krishna Potthuri wrote:
> Add 'output-enable' configuration parameter to the properties list.
>
> Using these pinctrl properties observed hang issues with older Xilinx
> ZynqMP Platform Management Firmware, hence reverted the patch previously.
> Commit ff8356060e3a5e126abb ("Revert "dt-bindings: pinctrl-zynqmp: Add
> output-enable configuration"").
And what has changed since then that makes it okay to add?
Is the old firmware not still in the wild?
Thanks,
Conor.
>
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@....com>
> ---
> .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> index 2722dc7bb03d..1e2b9b627b12 100644
> --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> @@ -274,6 +274,10 @@ patternProperties:
> slew-rate:
> enum: [0, 1]
>
> + output-enable:
> + description:
> + This will internally disable the tri-state for MIO pins.
> +
> drive-strength:
> description:
> Selects the drive strength for MIO pins, in mA.
> --
> 2.25.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists