Message-ID: <20230718172850.GA3954824@dev-arch.thelio-3990X>
Date:   Tue, 18 Jul 2023 10:28:50 -0700
From:   Nathan Chancellor <nathan@...nel.org>
To:     "Sahin, Okan" <Okan.Sahin@...log.com>
Cc:     Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        "Tilki, Ibrahim" <Ibrahim.Tilki@...log.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "llvm@...ts.linux.dev" <llvm@...ts.linux.dev>
Subject: Re: [PATCH v3 2/2] regulator: max77857: Add ADI MAX77857/59/MAX77831
 Regulator Support

On Tue, Jul 18, 2023 at 05:25:32PM +0000, Sahin, Okan wrote:
> >From: Nathan Chancellor <nathan@...nel.org>
> >Sent: Tuesday, July 18, 2023 6:55 PM
> >To: Sahin, Okan <Okan.Sahin@...log.com>
> >Cc: Liam Girdwood <lgirdwood@...il.com>; Mark Brown <broonie@...nel.org>;
> >Rob Herring <robh+dt@...nel.org>; Krzysztof Kozlowski
> ><krzysztof.kozlowski+dt@...aro.org>; Conor Dooley <conor+dt@...nel.org>; Tilki,
> >Ibrahim <Ibrahim.Tilki@...log.com>; linux-kernel@...r.kernel.org;
> >devicetree@...r.kernel.org; llvm@...ts.linux.dev
> >Subject: Re: [PATCH v3 2/2] regulator: max77857: Add ADI MAX77857/59/MAX77831
> >Regulator Support
> >
> >[External]
> >
> >Hi Okan,
> >
> >On Mon, Jul 17, 2023 at 08:07:35AM +0300, Okan Sahin wrote:
> >> Regulator driver for  MAX77857/59 and MAX77831.
> >> The MAX77857 is a high-efficiency, high-performance
> >> buck-boost converter targeted for systems requiring
> >> a wide input voltage range (2.5V to 16V).
> >>
> >> The MAX77859 is high-Efficiency Buck-Boost Converter
> >> for USB-PD/PPS Applications. It has wide input range
> >> (2.5V to 22V)
> >>
> >> The MAX77831 is a high-efficiency, high-performance
> >> buck-boost converter targeted for systems requiring
> >> wide input voltage range (2.5V to 16V).
> >>
> >> Signed-off-by: Okan Sahin <okan.sahin@...log.com>
> >> ---
> >>  drivers/regulator/Kconfig              |  10 +
> >>  drivers/regulator/Makefile             |   1 +
> >>  drivers/regulator/max77857-regulator.c | 459 +++++++++++++++++++++++++
> >>  3 files changed, 470 insertions(+)
> >>  create mode 100644 drivers/regulator/max77857-regulator.c
> >>
> >> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> >> index e5f3613c15fa..09eaa1cd90de 100644
> >> --- a/drivers/regulator/Kconfig
> >> +++ b/drivers/regulator/Kconfig
> >> @@ -573,6 +573,16 @@ config REGULATOR_MAX77650
> >>  	  Semiconductor. This device has a SIMO with three independent
> >>  	  power rails and an LDO.
> >>
> >> +config REGULATOR_MAX77857
> >> +	tristate "ADI MAX77857/MAX77831 regulator support"
> >> +	depends on I2C
> >> +	select REGMAP_I2C
> >> +	help
> >> +	  This driver controls a ADI MAX77857 and MAX77831 regulators.
> >> +	  via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
> >> +	  converters with input voltage range (2.5V to 16V). Say Y here to
> >> +	  enable the regulator driver
> >> +
> >>  config REGULATOR_MAX8649
> >>  	tristate "Maxim 8649 voltage regulator"
> >>  	depends on I2C
> >> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> >> index 58dfe0147cd4..e7230846b680 100644
> >> --- a/drivers/regulator/Makefile
> >> +++ b/drivers/regulator/Makefile
> >> @@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_MAX77686) += max77686-
> >regulator.o
> >>  obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
> >>  obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
> >>  obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
> >> +obj-$(CONFIG_REGULATOR_MAX77857) += max77857-regulator.o
> >>  obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> >>  obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> >>  obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
> >> diff --git a/drivers/regulator/max77857-regulator.c b/drivers/regulator/max77857-
> >regulator.c
> >> new file mode 100644
> >> index 000000000000..c5482ffd606e
> >> --- /dev/null
> >> +++ b/drivers/regulator/max77857-regulator.c
> >> @@ -0,0 +1,459 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Copyright (c) 2023 Analog Devices, Inc.
> >> + * ADI Regulator driver for the MAX77857
> >> + * MAX77859 and MAX77831.
> >> + */
> >> +#include <linux/bitfield.h>
> >> +#include <linux/i2c.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/module.h>
> >> +#include <linux/regmap.h>
> >> +#include <linux/regulator/driver.h>
> >> +#include <linux/regulator/machine.h>
> >> +#include <linux/regulator/of_regulator.h>
> >> +#include <linux/util_macros.h>
> >> +
> >> +#define MAX77857_REG_INT_SRC		0x10
> >> +#define MAX77857_REG_INT_MASK		0x11
> >> +#define MAX77857_REG_CONT1		0x12
> >> +#define MAX77857_REG_CONT2		0x13
> >> +#define MAX77857_REG_CONT3		0x14
> >> +
> >> +#define MAX77857_INT_SRC_OCP		BIT(0)
> >> +#define MAX77857_INT_SRC_THS		BIT(1)
> >> +#define MAX77857_INT_SRC_HARDSHORT	BIT(2)
> >> +#define MAX77857_INT_SRC_OVP		BIT(3)
> >> +#define MAX77857_INT_SRC_POK		BIT(4)
> >> +
> >> +#define MAX77857_ILIM_MASK		GENMASK(2, 0)
> >> +#define MAX77857_CONT1_FREQ		GENMASK(4, 3)
> >> +#define MAX77857_CONT3_FPWM		BIT(5)
> >> +
> >> +#define MAX77859_REG_INT_SRC		0x11
> >> +#define MAX77859_REG_CONT1		0x13
> >> +#define MAX77859_REG_CONT2		0x14
> >> +#define MAX77859_REG_CONT3		0x15
> >> +#define MAX77859_REG_CONT5		0x17
> >> +#define MAX77859_CONT2_FPWM		BIT(2)
> >> +#define MAX77859_CONT2_INTB		BIT(3)
> >> +#define MAX77859_CONT3_DVS_START	BIT(2)
> >> +#define MAX77859_VOLTAGE_SEL_MASK	GENMASK(9, 0)
> >> +
> >> +#define MAX77859_CURRENT_MIN		1000000
> >> +#define MAX77859_CURRENT_MAX		5000000
> >> +#define MAX77859_CURRENT_STEP		50000
> >> +
> >> +enum max77857_id {
> >> +	ID_MAX77831 = 1,
> >> +	ID_MAX77857,
> >> +	ID_MAX77859,
> >> +	ID_MAX77859A,
> >> +};
> >> +
> >> +static bool max77857_volatile_reg(struct device *dev, unsigned int reg)
> >> +{
> >> +	enum max77857_id id = (enum max77857_id)dev_get_drvdata(dev);
> >> +
> >> +	switch (id) {
> >> +	case ID_MAX77831:
> >> +	case ID_MAX77857:
> >> +		return reg == MAX77857_REG_INT_SRC;
> >> +	case ID_MAX77859:
> >> +	case ID_MAX77859A:
> >> +		return reg == MAX77859_REG_INT_SRC;
> >> +	default:
> >> +		return true;
> >> +	}
> >> +}
> >> +
> >> +struct regmap_config max77857_regmap_config = {
> >> +	.reg_bits = 8,
> >> +	.val_bits = 8,
> >> +	.cache_type = REGCACHE_MAPLE,
> >> +	.volatile_reg = max77857_volatile_reg,
> >> +};
> >> +
> >> +static int max77857_get_status(struct regulator_dev *rdev)
> >> +{
> >> +	unsigned int val;
> >> +	int ret;
> >> +
> >> +	ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	if (FIELD_GET(MAX77857_INT_SRC_POK, val))
> >> +		return REGULATOR_STATUS_ON;
> >> +
> >> +	return REGULATOR_STATUS_ERROR;
> >> +}
> >> +
> >> +static unsigned int max77857_get_mode(struct regulator_dev *rdev)
> >> +{
> >> +	enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> >> +	unsigned int regval;
> >> +	int ret;
> >> +
> >> +	switch (id) {
> >> +	case ID_MAX77831:
> >> +	case ID_MAX77857:
> >> +		ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3,
> >&regval);
> >> +		if (ret)
> >> +			return ret;
> >> +
> >> +		if (FIELD_GET(MAX77857_CONT3_FPWM, regval))
> >> +			return REGULATOR_MODE_FAST;
> >> +
> >> +		break;
> >> +	case ID_MAX77859:
> >> +	case ID_MAX77859A:
> >> +		ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2,
> >&regval);
> >> +		if (ret)
> >> +			return ret;
> >> +
> >> +		if (FIELD_GET(MAX77859_CONT2_FPWM, regval))
> >> +			return REGULATOR_MODE_FAST;
> >> +
> >> +		break;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return REGULATOR_MODE_NORMAL;
> >> +}
> >> +
> >> +static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode)
> >> +{
> >> +	enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> >> +	unsigned int reg, val;
> >> +
> >> +	switch (id) {
> >> +	case ID_MAX77831:
> >> +	case ID_MAX77857:
> >> +		reg = MAX77857_REG_CONT3;
> >> +		val = MAX77857_CONT3_FPWM;
> >> +		break;
> >> +	case ID_MAX77859:
> >> +	case ID_MAX77859A:
> >> +		reg = MAX77859_REG_CONT2;
> >> +		val = MAX77859_CONT2_FPWM;
> >> +		break;
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	switch (mode) {
> >> +	case REGULATOR_MODE_FAST:
> >> +		return regmap_set_bits(rdev->regmap, reg, val);
> >> +	case REGULATOR_MODE_NORMAL:
> >> +		return regmap_clear_bits(rdev->regmap, reg, val);
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +}
> >> +
> >> +static int max77857_get_error_flags(struct regulator_dev *rdev,
> >> +				    unsigned int *flags)
> >> +{
> >> +	unsigned int val;
> >> +	int ret;
> >> +
> >> +	ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	*flags = 0;
> >> +
> >> +	if (FIELD_GET(MAX77857_INT_SRC_OVP, val))
> >> +		*flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
> >> +
> >> +	if (FIELD_GET(MAX77857_INT_SRC_OCP, val) ||
> >> +	    FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val))
> >> +		*flags |= REGULATOR_ERROR_OVER_CURRENT;
> >> +
> >> +	if (FIELD_GET(MAX77857_INT_SRC_THS, val))
> >> +		*flags |= REGULATOR_ERROR_OVER_TEMP;
> >> +
> >> +	if (!FIELD_GET(MAX77857_INT_SRC_POK, val))
> >> +		*flags |= REGULATOR_ERROR_FAIL;
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static struct linear_range max77859_lin_ranges[] = {
> >> +	REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000)
> >> +};
> >> +
> >> +static const unsigned int max77859_ramp_table[4] = {
> >> +	1000, 500, 250, 125
> >> +};
> >> +
> >> +static int max77859_set_voltage_sel(struct regulator_dev *rdev,
> >> +				    unsigned int sel)
> >> +{
> >> +	__be16 reg;
> >> +	int ret;
> >> +
> >> +	reg = cpu_to_be16(sel);
> >> +
> >> +	ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, &reg, 2);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	/* actually apply new voltage */
> >> +	return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3,
> >> +			       MAX77859_CONT3_DVS_START);
> >> +}
> >> +
> >> +int max77859_get_voltage_sel(struct regulator_dev *rdev)
> >> +{
> >> +	__be16 reg;
> >> +	int ret;
> >> +
> >> +	ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, &reg, 2);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg));
> >> +}
> >> +
> >> +int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int
> >max_uA)
> >> +{
> >> +	u32 selector;
> >> +
> >> +	if (max_uA < MAX77859_CURRENT_MIN)
> >> +		return -EINVAL;
> >> +
> >> +	selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) /
> >MAX77859_CURRENT_STEP;
> >> +
> >> +	selector = clamp_val(selector, 0x00, 0x7F);
> >> +
> >> +	return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector);
> >> +}
> >> +
> >> +int max77859_get_current_limit(struct regulator_dev *rdev)
> >> +{
> >> +	u32 selector;
> >> +	int ret;
> >> +
> >> +	ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	if (selector <= 0x12)
> >> +		return MAX77859_CURRENT_MIN;
> >> +
> >> +	if (selector >= 0x64)
> >> +		return MAX77859_CURRENT_MAX;
> >> +
> >> +	return MAX77859_CURRENT_MIN + (selector - 0x12) *
> >MAX77859_CURRENT_STEP;
> >> +}
> >> +
> >> +static const struct regulator_ops max77859_regulator_ops = {
> >> +	.list_voltage = regulator_list_voltage_linear_range,
> >> +	.set_voltage_sel = max77859_set_voltage_sel,
> >> +	.get_voltage_sel = max77859_get_voltage_sel,
> >> +	.set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> +	.get_status = max77857_get_status,
> >> +	.set_mode = max77857_set_mode,
> >> +	.get_mode = max77857_get_mode,
> >> +	.get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static const struct regulator_ops max77859a_regulator_ops = {
> >> +	.list_voltage = regulator_list_voltage_linear_range,
> >> +	.set_voltage_sel = max77859_set_voltage_sel,
> >> +	.get_voltage_sel = max77859_get_voltage_sel,
> >> +	.set_current_limit = max77859_set_current_limit,
> >> +	.get_current_limit = max77859_get_current_limit,
> >> +	.set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> +	.get_status = max77857_get_status,
> >> +	.set_mode = max77857_set_mode,
> >> +	.get_mode = max77857_get_mode,
> >> +	.get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static const struct regulator_ops max77857_regulator_ops = {
> >> +	.list_voltage = regulator_list_voltage_linear_range,
> >> +	.set_voltage_sel = regulator_set_voltage_sel_regmap,
> >> +	.get_voltage_sel = regulator_get_voltage_sel_regmap,
> >> +	.set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> +	.get_status = max77857_get_status,
> >> +	.set_mode = max77857_set_mode,
> >> +	.get_mode = max77857_get_mode,
> >> +	.get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static struct linear_range max77857_lin_ranges[] = {
> >> +	REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500)
> >> +};
> >> +
> >> +static const unsigned int max77857_switch_freq[] = {
> >> +	1200000, 1500000, 1800000, 2100000
> >> +};
> >> +
> >> +static const unsigned int max77857_ramp_table[2][4] = {
> >> +	{ 1333, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */
> >> +	{ 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */
> >> +};
> >> +
> >> +static struct regulator_desc max77857_regulator_desc = {
> >> +	.ops = &max77857_regulator_ops,
> >> +	.name = "max77857",
> >> +	.linear_ranges = max77857_lin_ranges,
> >> +	.n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges),
> >> +	.vsel_mask = 0xFF,
> >> +	.vsel_reg = MAX77857_REG_CONT2,
> >> +	.ramp_delay_table = max77857_ramp_table[0],
> >> +	.n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]),
> >> +	.ramp_reg = MAX77857_REG_CONT3,
> >> +	.ramp_mask = GENMASK(1, 0),
> >> +	.ramp_delay = max77857_ramp_table[0][0],
> >
> >This breaks the build with GCC 5.x through 7.x:
> >
> >  drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not
> >constant
> >    .ramp_delay = max77857_ramp_table[0][0],
> >                  ^~~~~~~~~~~~~~~~~~~
> >  drivers/regulator/max77857-regulator.c:312:16: note: (near initialization for
> >'max77857_regulator_desc.ramp_delay')
> >
> >and clang:
> >
> >  drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not a
> >compile-time constant
> >    312 |         .ramp_delay = max77857_ramp_table[0][0],
> >        |                       ^~~~~~~~~~~~~~~~~~~~~~~~~
> >  1 error generated.
> >
> >This relies on a GCC 8.x+ change that accepts more things as
> >compile-time constants, which is being worked on in clang
> >(https://urldefense.com/v3/__https://reviews.llvm.org/D76096__;!!A3Ni8CS0y2Y!4ql
> >noZFf_EVInN-
> >MaRDQWqOHb1SEbEqkwlU06PCt1Ngw6tE41ZEE24hnL1wBMsfotRCue4-i1VwD0xw$
> >). Since the kernel supports older
> >compilers, this will have to be worked around somehow. Perhaps a define
> >that can be used in both places?
> >
> >Cheers,
> >Nathan
> >
> >> +	.owner = THIS_MODULE,
> >> +};
> >> +
> >> +static void max77857_calc_range(struct device *dev, enum max77857_id id)
> >> +{
> >> +	struct linear_range *range;
> >> +	unsigned long vref_step;
> >> +	u32 rtop = 0;
> >> +	u32 rbot = 0;
> >> +
> >> +	device_property_read_u32(dev, "adi,rtop-ohms", &rtop);
> >> +	device_property_read_u32(dev, "adi,rbot-ohms", &rbot);
> >> +
> >> +	if (!rbot || !rtop)
> >> +		return;
> >> +
> >> +	switch (id) {
> >> +	case ID_MAX77831:
> >> +	case ID_MAX77857:
> >> +		range = max77857_lin_ranges;
> >> +		vref_step = 4900UL;
> >> +		break;
> >> +	case ID_MAX77859:
> >> +	case ID_MAX77859A:
> >> +		range = max77859_lin_ranges;
> >> +		vref_step = 1250UL;
> >> +		break;
> >> +	}
> >> +
> >> +	range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot);
> >> +	range->min = range->step * range->min_sel;
> >> +}
> >> +
> >> +static int max77857_probe(struct i2c_client *client)
> >> +{
> >> +	const struct i2c_device_id *i2c_id;
> >> +	struct device *dev = &client->dev;
> >> +	struct regulator_config cfg = { };
> >> +	struct regulator_dev *rdev;
> >> +	struct regmap *regmap;
> >> +	enum max77857_id id;
> >> +	u32 switch_freq = 0;
> >> +	int ret;
> >> +
> >> +	i2c_id = i2c_client_get_device_id(client);
> >> +	if (!i2c_id)
> >> +		return -EINVAL;
> >> +
> >> +	id = i2c_id->driver_data;
> >> +
> >> +	dev_set_drvdata(dev, (void *)id);
> >> +
> >> +	if (id == ID_MAX77859 || id == ID_MAX77859A) {
> >> +		max77857_regulator_desc.ops = &max77859_regulator_ops;
> >> +		max77857_regulator_desc.linear_ranges = max77859_lin_ranges;
> >> +		max77857_regulator_desc.ramp_delay_table =
> >max77859_ramp_table;
> >> +		max77857_regulator_desc.ramp_delay = max77859_ramp_table[0];
> >> +	}
> >> +
> >> +	if (id == ID_MAX77859A)
> >> +		max77857_regulator_desc.ops = &max77859a_regulator_ops;
> >> +
> >> +	max77857_calc_range(dev, id);
> >> +
> >> +	regmap = devm_regmap_init_i2c(client, &max77857_regmap_config);
> >> +	if (IS_ERR(regmap))
> >> +		return dev_err_probe(dev, PTR_ERR(regmap),
> >> +				     "cannot initialize regmap\n");
> >> +
> >> +	device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq);
> >> +	if (switch_freq) {
> >> +		switch_freq = find_closest(switch_freq, max77857_switch_freq,
> >> +					   ARRAY_SIZE(max77857_switch_freq));
> >> +
> >> +		if (id == ID_MAX77831 && switch_freq == 3)
> >> +			switch_freq = 2;
> >> +
> >> +		switch (id) {
> >> +		case ID_MAX77831:
> >> +		case ID_MAX77857:
> >> +			ret = regmap_update_bits(regmap, MAX77857_REG_CONT1,
> >> +						 MAX77857_CONT1_FREQ,
> >switch_freq);
> >> +
> >> +			if (switch_freq >= 2)
> >> +				break;
> >> +
> >> +			max77857_regulator_desc.ramp_delay_table =
> >max77857_ramp_table[1];
> >> +			max77857_regulator_desc.ramp_delay =
> >max77857_ramp_table[1][0];
> >> +			break;
> >> +		case ID_MAX77859:
> >> +		case ID_MAX77859A:
> >> +			ret = regmap_update_bits(regmap, MAX77859_REG_CONT1,
> >> +						 MAX77857_CONT1_FREQ,
> >switch_freq);
> >> +			break;
> >> +		}
> >> +		if (ret)
> >> +			return ret;
> >> +	}
> >> +
> >> +	cfg.dev = dev;
> >> +	cfg.driver_data = (void *)id;
> >> +	cfg.regmap = regmap;
> >> +	cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
> >> +						   &max77857_regulator_desc);
> >> +	if (!cfg.init_data)
> >> +		return -ENOMEM;
> >> +
> >> +	rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg);
> >> +	if (IS_ERR(rdev))
> >> +		return dev_err_probe(dev, PTR_ERR(rdev),
> >> +				     "cannot register regulator\n");
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +const struct i2c_device_id max77857_id[] = {
> >> +	{ "max77831", ID_MAX77831 },
> >> +	{ "max77857", ID_MAX77857 },
> >> +	{ "max77859", ID_MAX77859 },
> >> +	{ "max77859a", ID_MAX77859A },
> >> +	{ }
> >> +};
> >> +MODULE_DEVICE_TABLE(i2c, max77857_id);
> >> +
> >> +static const struct of_device_id max77857_of_id[] = {
> >> +	{ .compatible = "adi,max77831", .data = (void *)ID_MAX77831 },
> >> +	{ .compatible = "adi,max77857", .data = (void *)ID_MAX77857 },
> >> +	{ .compatible = "adi,max77859", .data = (void *)ID_MAX77859 },
> >> +	{ .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A },
> >> +	{ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, max77857_of_id);
> >> +
> >> +struct i2c_driver max77857_driver = {
> >> +	.driver = {
> >> +		.name = "max77857",
> >> +		.of_match_table = max77857_of_id,
> >> +	},
> >> +	.id_table = max77857_id,
> >> +	.probe_new = max77857_probe,
> >> +};
> >> +module_i2c_driver(max77857_driver);
> >> +
> >> +MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter
> >Driver");
> >> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@...log.com>");
> >> +MODULE_AUTHOR("Okan Sahin <Okan.Sahin@...log.com>");
> >> +MODULE_LICENSE("GPL");
> >> --
> >> 2.30.2
> >>
> 
> Hi Nathan,
> 
> Should I need to fix it within the patch v4? Or  should I sent another patch after merge?

I do not believe Mark rebases his tree so he would not take a v4. It
will need to be a separate patch on top.

Cheers,
Nathan

Powered by blists - more mailing lists