linux-kernel - Re: [PATCH 1/2] dt-bindings: reset: Updated binding for Versal-NET reset driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <109990fa-fb67-48e2-6424-37ce47cf68f7@amd.com>
Date:   Tue, 18 Jul 2023 15:59:42 +0200
From:   Michal Simek <michal.simek@....com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Conor Dooley <conor@...nel.org>,
        Piyush Mehta <piyush.mehta@....com>
Cc:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        conor+dt@...nel.org, p.zabel@...gutronix.de,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        git@....com
Subject: Re: [PATCH 1/2] dt-bindings: reset: Updated binding for Versal-NET
 reset driver



On 7/18/23 15:21, Krzysztof Kozlowski wrote:
> On 18/07/2023 15:20, Krzysztof Kozlowski wrote:
>> On 18/07/2023 15:11, Michal Simek wrote:
>>>>>
>>>>> That numbers in DT are virtual no matter if you use ID from 0 to max or random
>>>>> values it is up to code to handle them. Checking nr_pins against ID is done in
>>>>> core but it is up to drivers.
>>>>
>>>> No, you confuse "virtual" and "ID". IDs are not virtual. IDs are real
>>>> and have representation in Linux driver. You do not need to define
>>>> anything virtual in the bindings.
>>>
>>> Not sure how you define ID itself. But HW doesn't know ID. HW knows only
>>> register which you can use to perform the reset. It is not really 128bit
>>> register where every bit targets to different IP.
>>>
>>> And this is SW-firmware interface like SCMI reset driver.
>>>
>>> Firmware is saying that ID 0 is QSPI, ID 1 is MMC.
>>> Their Linux driver is asking for nr_reset via firmware call which can be
>>> different for different SOC and that's fine and I have no problem with it.
>>> But only SCMI server is dictating that ID 0 is QSPI and ID 1 is MMC. Different
>>> SCMI server implementation can map it differently.
>>
>> Sure, and all this points to: no need for bindings.
>>
>>>
>>>
>>>>> In our case that IDs are coming from firmware and driver itself is just matching
>>>>> them.
>>>>
>>>> So they are the same as if coming from hardware - no need for IDs.
>>>
>>> It is hard to say what hardware here exactly is. From my perspective and I am
>>> not advocating not using IDs from 0 to max, it is just a number.
>>>
>>> If my firmware knows that QSPI reset is 0xc10402dU then I will just pass it to
>>> reach my goal which is reset QSPI IP.
>>>
>>> If you think that we should use IDs from 0 to max NR I am happy to pass this
>>> message to PM team and we should extend any SW to do translation between.
>>
>> When we talk about IDs and bindings, we mean IDs meaningful to Linux.
>> Whatever is ignored by Linux and passed to anyone else - hardware or
>> firmware - is not a ID anymore from bindings point of view. It's just
>> some value.
> 
> And just some proofs:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/dt-bindings/reset/xlnx-versal-resets.h?h=v6.5-rc2
> $ git grep VERSAL_RST
> Results: No users.

I know this. I should likely submit one DT for Versal to start to use it.

Thanks,
Michal