lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230719163446.1398961-4-samuel.holland@sifive.com>
Date:   Wed, 19 Jul 2023 09:34:44 -0700
From:   Samuel Holland <samuel.holland@...ive.com>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Andy Shevchenko <andy@...nel.org>
Cc:     Emil Renner Berthing <emil.renner.berthing@...onical.com>,
        Rob Herring <robh+dt@...nel.org>,
        Frank Rowand <frowand.list@...il.com>,
        Samuel Holland <samuel.holland@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-riscv@...ts.infradead.org
Subject: [PATCH v2 3/4] gpio: sifive: Get the parent IRQ's domain from its irq_data

Do not parse the devicetree again when the data is already available
from the IRQ subsystem. This follows the example of the ThunderX and
X-Gene GPIO drivers. The ngpio check is needed to avoid a possible
out-of-bounds read.

Signed-off-by: Samuel Holland <samuel.holland@...ive.com>
---

Changes in v2:
 - New patch for v2

 drivers/gpio/gpio-sifive.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
index 6606c919d957..46a42109d6f5 100644
--- a/drivers/gpio/gpio-sifive.c
+++ b/drivers/gpio/gpio-sifive.c
@@ -6,7 +6,6 @@
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>
-#include <linux/of_irq.h>
 #include <linux/gpio/driver.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -180,9 +179,6 @@ static const struct regmap_config sifive_gpio_regmap_config = {
 static int sifive_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = pdev->dev.of_node;
-	struct device_node *irq_parent;
-	struct irq_domain *parent;
 	struct gpio_irq_chip *girq;
 	struct sifive_gpio *chip;
 	int ret, ngpio;
@@ -202,24 +198,16 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
-	irq_parent = of_irq_find_parent(node);
-	if (!irq_parent) {
-		dev_err(dev, "no IRQ parent node\n");
-		return -ENODEV;
-	}
-	parent = irq_find_host(irq_parent);
-	of_node_put(irq_parent);
-	if (!parent) {
-		dev_err(dev, "no IRQ parent domain\n");
-		return -ENODEV;
-	}
-
 	for (ngpio = 0; ngpio < SIFIVE_GPIO_MAX; ngpio++) {
 		ret = platform_get_irq_optional(pdev, ngpio);
 		if (ret < 0)
 			break;
 		chip->irq_number[ngpio] = ret;
 	}
+	if (!ngpio) {
+		dev_err(dev, "no IRQ found\n");
+		return -ENODEV;
+	}
 
 	ret = bgpio_init(&chip->gc, dev, 4,
 			 chip->base + SIFIVE_GPIO_INPUT_VAL,
@@ -248,7 +236,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 	girq = &chip->gc.irq;
 	gpio_irq_chip_set_chip(girq, &sifive_gpio_irqchip);
 	girq->fwnode = dev->fwnode;
-	girq->parent_domain = parent;
+	girq->parent_domain = irq_get_irq_data(chip->irq_number[0])->domain;
 	girq->child_to_parent_hwirq = sifive_gpio_child_to_parent_hwirq;
 	girq->handler = handle_bad_irq;
 	girq->default_type = IRQ_TYPE_NONE;
-- 
2.40.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ