lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <03748443-0459-c925-ce76-33ec134a303d@linaro.org>
Date:   Wed, 19 Jul 2023 19:16:33 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     James Hilliard <james.hilliard1@...il.com>,
        devicetree@...r.kernel.org
Cc:     Gregory CLEMENT <gregory.clement@...tlin.com>,
        Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
        soc@...nel.org, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM
 support

On 19/07/2023 18:00, James Hilliard wrote:
> This patch adds support for the Variscite VAR_SOM-MX6 SoM with :
> - i.MX6 Quad or Dual Lite SoC
> - 256 – 4096 MB DDR3
> - 4-64 GB eMMC
> - 128 – 1024 MB SLC NAND
> - Camera Interface
> - HDMI+CEC interface
> - LVDS / DSI / Parallel RGB interfaces
> - Ethernet RGMII interface
> - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module
> - SD/MMC/SDIO interface
> - USB Host + USB OTG interface
> - I2C interfaces
> - SPI interfaces
> - PCI-Express 2.0 interface
> - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
> - Digital Audio interface
> - S/PDIF interface
> 
> Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/
> 
> Support is handled with a SoM-centric dtsi exporting the default interfaces
> along the default pinmuxing to be enabled by the board dts file.
> 
> This file is based on the one provided by Variscite on their own
> kernel, but adapted for mainline.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement@...tlin.com>
> Signed-off-by: James Hilliard <james.hilliard1@...il.com>
> ---
>  arch/arm/boot/dts/imx6qdl-var-som.dtsi | 547 +++++++++++++++++++++++++
>  1 file changed, 547 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-var-som.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/imx6qdl-var-som.dtsi
> new file mode 100644
> index 000000000000..e93dae59624e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-var-som.dtsi
> @@ -0,0 +1,547 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite VAR-SOM-MX6 Module
> + *
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright (C) 2014-2016 Variscite, Ltd.
> + * Author: Donio Ron <ron.d@...iscite.com>
> + * Copyright 2022 Bootlin
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include <dt-bindings/clock/imx6qdl-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> +	model = "Variscite i.MX6 QUAD/DUAL VAR-SOM-MX6";
> +	compatible = "fsl,imx6q";

That's not correct compatible. It's not Imx6 soc. It's a som.

> +...
> +
> +	sound: sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "var-som-audio";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&sound_codec>;
> +		simple-audio-card,frame-master = <&sound_codec>;
> +		simple-audio-card,widgets = "Headphone", "Headphone Jack",
> +					    "Line", "Line In", "Microphone", "Mic Jack";
> +		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
> +					    "Headphone Jack", "HPROUT",
> +					    "LINE1L", "Line In",
> +					    "LINE1R", "Line In";
> +
> +		sound_cpu: simple-audio-card,cpu {
> +			sound-dai = <&ssi2>;
> +		};
> +
> +		sound_codec: simple-audio-card,codec {
> +			sound-dai = <&tlv320aic3106>;
> +			clocks = <&clks IMX6QDL_CLK_CKO>;
> +		};
> +	};
> +
> +	wlan_bt_rfkill {

No underscores in node names.

Just "rfkill"


> +		compatible = "rfkill-gpio";
> +		name = "wlan_bt_rfkill";
> +		type = <2>;     /* bluetooth */
> +		gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +

...

> +	tlv320aic3106: codec@1b {
> +		compatible = "ti,tlv320aic3106";
> +		reg = <0x1b>;
> +		#sound-dai-cells = <0>;
> +		DRVDD-supply = <&reg_3p3v>;
> +		AVDD-supply = <&reg_3p3v>;
> +		IOVDD-supply = <&reg_3p3v>;
> +		DVDD-supply = <&reg_3p3v>;
> +		ai3x-ocmv = <0>;
> +		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
> +		ai3x-gpio-func = <
> +			0 /* AIC3X_GPIO1_FUNC_DISABLED */
> +			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
> +		>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx6qdl-var-som-mx6 {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				/* CTW6120 IRQ */
> +				MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x80000000
> +				/* SDMMC2 CD/WP */
> +				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x80000000
> +				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
> +			>;
> +		};
> +
> +		pinctrl_audmux: audmux {

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

AFAIR, all of them end with grp


...

> +
> +&usdhc3 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +	bus-width = <4>;
> +	vmmc-supply = <&reg_wl18xx_vmmc>;
> +	non-removable;
> +	wakeup-source;
> +	keep-power-in-suspend;
> +	cap-power-off-card;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	wlcore: wlcore@0 {

Generic node names. Is this wifi?

https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "ti,wl1835";
> +		reg = <2>;


Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ