[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230719061808.30967-1-pranavi.somisetty@amd.com>
Date: Wed, 19 Jul 2023 00:18:08 -0600
From: Pranavi Somisetty <pranavi.somisetty@....com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <michal.simek@....com>,
<harini.katakam@....com>
CC: <git@....com>, <radhey.shyam.pandey@....com>,
<pranavi.somisetty@....com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v2] dt-bindings: net: xilinx_gmii2rgmii: Convert to json schema
Convert the Xilinx GMII to RGMII Converter device tree binding
documentation to json schema.
This converter is usually used as gem <---> gmii2rgmii <---> external phy
and, it's phy-handle should point to the phandle of the external phy.
Signed-off-by: Pranavi Somisetty <pranavi.somisetty@....com>
---
Changes v2:
1. Changed description for the property "reg".
2. Added a reference to the description of "phy-handle" property.
---
.../bindings/net/xilinx_gmii2rgmii.txt | 35 ------------
.../bindings/net/xlnx,gmii-to-rgmii.yaml | 54 +++++++++++++++++++
2 files changed, 54 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
create mode 100644 Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml
diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
deleted file mode 100644
index 038dda48b8e6..000000000000
--- a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-XILINX GMIITORGMII Converter Driver Device Tree Bindings
---------------------------------------------------------
-
-The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
-Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
-Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
-This core can be used in all three modes of operation(10/100/1000 Mb/s).
-The Management Data Input/Output (MDIO) interface is used to configure the
-Speed of operation. This core can switch dynamically between the three
-Different speed modes by configuring the conveter register through mdio write.
-
-This converter sits between the ethernet MAC and the external phy.
-MAC <==> GMII2RGMII <==> RGMII_PHY
-
-For more details about mdio please refer phy.txt file in the same directory.
-
-Required properties:
-- compatible : Should be "xlnx,gmii-to-rgmii-1.0"
-- reg : The ID number for the phy, usually a small integer
-- phy-handle : Should point to the external phy device.
- See ethernet.txt file in the same directory.
-
-Example:
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- phy: ethernet-phy@0 {
- ......
- };
- gmiitorgmii: gmiitorgmii@8 {
- compatible = "xlnx,gmii-to-rgmii-1.0";
- reg = <8>;
- phy-handle = <&phy>;
- };
- };
diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml
new file mode 100644
index 000000000000..9d22382a64ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx GMII to RGMII Converter
+
+maintainers:
+ - Harini Katakam <harini.katakam@....com>
+
+description:
+ The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
+ Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
+ ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
+ This core can be used in all three modes of operation(10/100/1000 Mb/s).
+ The Management Data Input/Output (MDIO) interface is used to configure the
+ speed of operation. This core can switch dynamically between the three
+ different speed modes by configuring the converter register through mdio write.
+ The core cannot function without an external phy connected to it.
+
+properties:
+ compatible:
+ const: xlnx,gmii-to-rgmii-1.0
+
+ reg:
+ minimum: 0
+ maximum: 31
+ description: The ID number for the phy.
+
+ phy-handle:
+ $ref: ethernet-controller.yaml#/properties/phy-handle
+
+required:
+ - compatible
+ - reg
+ - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+ gmiitorgmii@8 {
+ compatible = "xlnx,gmii-to-rgmii-1.0";
+ reg = <8>;
+ phy-handle = <&phy>;
+ };
+ };
--
2.36.1
Powered by blists - more mailing lists