[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230719104041.126718-1-quic_ipkumar@quicinc.com>
Date: Wed, 19 Jul 2023 16:10:36 +0530
From: Praveenkumar I <quic_ipkumar@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <amitk@...nel.org>,
<thara.gopinath@...il.com>, <rafael@...nel.org>,
<daniel.lezcano@...aro.org>, <rui.zhang@...el.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <quic_varada@...cinc.com>
Subject: [PATCH v4 0/5] Add IPQ5332 TSENS support
IPQ5332 uses tsens v2.3.3 IP with combined interrupt for
upper/lower and critical. IPQ5332 does not have RPM and
kernel has to take care of TSENS enablement and calibration.
This patch series adds the sensor enablement and calibration
support. On top, adds IPQ5332 TSENS support.
[v4]:
Updated the [v3 1/5], named values used inside the init function
and used FIELD_PREP() to update Sn_COVERSION data
[v3]:
Renamed init function in [v2 1/5] and reordered device nodes
according to the address in [v2 3/5]
[v2]:
Dropped [v1 1/6] dt-bindings change and added nvmem-cell-names
as part of [v2 2/5] ipq5332 dt-bindings
Praveenkumar I (5):
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332 compatible
arm64: dts: qcom: ipq5332: Add tsens node
arm64: dts: qcom: ipq5332: Add thermal zone nodes
thermal/drivers/tsens: Add IPQ5332 support
.../bindings/thermal/qcom-tsens.yaml | 12 ++
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 144 +++++++++++++++
drivers/thermal/qcom/tsens-v2.c | 173 ++++++++++++++++++
drivers/thermal/qcom/tsens.c | 5 +-
drivers/thermal/qcom/tsens.h | 5 +-
5 files changed, 337 insertions(+), 2 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists