[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230719114328.2239818-1-andrej.picej@norik.com>
Date: Wed, 19 Jul 2023 13:43:26 +0200
From: Andrej Picej <andrej.picej@...ik.com>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, S.Riedmueller@...tec.de,
S.Mueller-Klieser@...tec.de, upstream@...tec.de
Subject: [PATCH v2 1/3] ARM: dts: imx6: phytec: fix RTC interrupt level
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
---
Changes in v2:
- no changes
---
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 1a599c294ab8..1ca4d219609f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -182,7 +182,7 @@ i2c_rtc: rtc@68 {
pinctrl-0 = <&pinctrl_rtc_int>;
reg = <0x68>;
interrupt-parent = <&gpio7>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
};
--
2.25.1
Powered by blists - more mailing lists