[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <79bb474aaf49fca37ede6cefce241aec6eeade0d.camel@phytec.de>
Date: Wed, 19 Jul 2023 11:49:41 +0000
From: Stefan Riedmüller <S.Riedmueller@...tec.de>
To: "kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux-imx@....com" <linux-imx@....com>,
"andrej.picej@...ik.com" <andrej.picej@...ik.com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"festevam@...il.com" <festevam@...il.com>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Stefan Müller-Klieser
<S.Mueller-Klieser@...tec.de>,
"upstream@...tec.de" <upstream@...tec.de>
Subject: Re: [PATCH v2 1/3] ARM: dts: imx6: phytec: fix RTC interrupt level
Hi Andrej,
On Wed, 2023-07-19 at 13:43 +0200, Andrej Picej wrote:
> RTC interrupt level should be set to "LOW". This was revealed by the
> introduction of commit:
>
> f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
>
> which changed the way IRQ type is obtained.
>
> Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
Reviewed-by: Stefan Riedmüller <s.riedmueller@...tec.de>
> ---
> Changes in v2:
> - no changes
> ---
> arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
> b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
> index 1a599c294ab8..1ca4d219609f 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
> @@ -182,7 +182,7 @@ i2c_rtc: rtc@68 {
> pinctrl-0 = <&pinctrl_rtc_int>;
> reg = <0x68>;
> interrupt-parent = <&gpio7>;
> - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> status = "disabled";
> };
> };
Powered by blists - more mailing lists