[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0cd8b154-d255-4c16-b76d-9d3b036f3093@lunn.ch>
Date: Thu, 20 Jul 2023 18:00:15 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Samin Guo <samin.guo@...rfivetech.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
netdev@...r.kernel.org, Peter Geis <pgwipeout@...il.com>,
Frank <Frank.Sae@...or-comm.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Conor Dooley <conor@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Yanhong Wang <yanhong.wang@...rfivetech.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver
strength cfg
> + motorcomm,rx-clk-drv-microamp:
> + description: |
> + drive strength of rx_clk rgmii pad.
> + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> + be configured with hardware pull-up resistors to match the SOC voltage
> + (usually 1.8V).
> + The software can read the registers to obtain the LDO voltage and configure
> + the legal drive strength(curren).
> + =====================================================
> + | voltage | curren Available (uA) |
current has a t.
> + =====================================================
> + | voltage | curren Available (uA) |
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists