| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZLnJzUynpTBvZGtA@gallifrey>
Date: Thu, 20 Jul 2023 23:57:01 +0000
From: "Dr. David Alan Gilbert" <linux@...blig.org>
To: Tom Talpey <tom@...pey.com>
Cc: Dave Kleikamp <dave.kleikamp@...cle.com>,
Steve French <smfrench@...il.com>, linkinjeon@...nel.org,
shaggy@...nel.org, linux-cifs@...r.kernel.org,
krisman@...labora.com, jfs-discussion@...ts.sourceforge.net,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/4] dedupe smb unicode files
* Tom Talpey (tom@...pey.com) wrote:
> On 7/19/2023 6:06 PM, Dave Kleikamp wrote:
> > On 7/19/23 4:58PM, Dr. David Alan Gilbert wrote:
> > > * Steve French (smfrench@...il.com) wrote:
> > > > The related question is which tree to send it from, if no problems
> > > > reported (presumably mine since it mostly affect cifs.ko and ksmbd.ko,
> > > > and because there hasn't been activity in fs/nls for years)
> > >
> > > That was my hope, given that ~half of the patches are directly on that
> > > code, and it's the only very active tree this touches as far as I can
> > > tell.
> > >
> > > > On Wed, Jul 19, 2023 at 12:56 PM Steve French
> > > > <smfrench@...il.com> wrote:
> > > > >
> > > > > No objections to this on my part. If Shaggy is ok with the JFS
> > > > > change, we could target it for 6.6-rc1 if it tests out ok
> >
> > For the series:
> > Reviewed-by: Dave Kleikamp <dave.kleikamp@...cle.com>
> >
> > Steve,
> > Feel free to pull in even the 4th patch into your tree with my consent.
> > Or if you're more comfortable, I could submit it after yours hits
> > mainline.
> >
> > Shaggy
>
> The changes look good to me but there is one quirk with the
> copyrights and SPDX in patch 2.
>
> In the new fs/nls/nls_ucs2_utils.c, the SPDX line changes from
> a "/* ... */" form to "// ...", which may be a proper update, but
> then partway down, adds the same SPDX in "/* ... */ form. These
> should at least be consistent.
>
> > +++ b/fs/nls/nls_ucs2_utils.c
> > @@ -1,19 +1,25 @@
> > -/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +// SPDX-License-Identifier: GPL-2.0-or-later
>
> vs
>
> > +++ b/fs/nls/nls_ucs2_utils.h
> > @@ -0,0 +1,297 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
Yeh that's an easy fix - so that's just the fact the .h has
the older /* where I'd fixed up the .c ?
> Second, the copyright in fs/nls/nls_ucs2_utils.c is a bit of
> a mash-up (adding 2009 especially).
>
> I think it's better to keep the exact text of both copyrights,
> perhaps with a note as to which files had them previously, and
> adding some new note/blank line to separate the recent contributions
> from Namjae and you from the ancient history.
How about the following;
* This file has taken chunks from a few other files
* smb/server/uniupr.h had the declaration:
*
* Some of the source code in this file came from fs/cifs/uniupr.h
* Copyright (c) International Business Machines Corp., 2000,2002
*
* fs/smb/server/unicode.c had the declaration:
*
* Some of the source code in this file came from fs/cifs/cifs_unicode.c
*
* Copyright (c) International Business Machines Corp., 2000,2009
* Modified by Steve French (sfrench@...ibm.com)
* Modified by Namjae Jeon (linkinjeon@...nel.org)
*
I haven't added the extra line above Namjae's line, since it's now
a straight copy from the unicode.c entry.
I'm not particularly fussed about adding my own line unless you think
it's needed; git keeps better history!
> > +++ b/fs/nls/nls_ucs2_utils.c
> > ...
> > - * Some of the source code in this file came from fs/cifs/uniupr.h
> > - * Copyright (c) International Business Machines Corp., 2000,2002
> > - *
> > - * uniupr.h - Unicode compressed case ranges
> > + * Some of the source code in this file came from fs/cifs/cifs_unicode.c
> > + * via fs/smb/unicode.c and fs/smb/uniupr.h and fs/cifs/uniupr.h
> > + * Copyright (c) International Business Machines Corp., 2000,2002,2009
> > + * Modified by Steve French (sfrench@...ibm.com)
> > + * Modified by Namjae Jeon (linkinjeon@...nel.org)
> > + * Modified by Dr. David Alan Gilbert <linux@...blig.org>
>
> Apart from considering these:
>
> Reviewed-by: Tom Talpey <tom@...pey.com>
Thanks!
Dave
> Nice work!
>
> > >
> > > Thanks.
> > >
> > > Dave
> > >
> > > > > On Wed, Jul 12, 2023 at 6:28 PM Dr. David Alan Gilbert
> > > > > <dave@...blig.org> wrote:
> > > > > >
> > > > > > * linux@...blig.org (linux@...blig.org) wrote:
> > > > > > > From: "Dr. David Alan Gilbert" <linux@...blig.org>
> > > > > > >
> > > > > > > The smb client and server code have (mostly) duplicated code
> > > > > > > for unicode manipulation, in particular upper case handling.
> > > > > > >
> > > > > > > Flatten this lot into shared code.
> > > > > >
> > > > > > Gentle two week ping on this please.
> > > > > >
> > > > > > Dave
> > > > > >
> > > > > > (Apologies to the 3 of you who already got a copy of this ping,
> > > > > > recent due to a missing header ',' )
> > > > > >
> > > > > > > There's some code that's slightly different between the two, and
> > > > > > > I've not attempted to share that - this should be strictly a no
> > > > > > > behaviour change set.
> > > > > > >
> > > > > > > In addition, the same tables and code are shared in jfs, however
> > > > > > > there's very little testing available for the unicode in there,
> > > > > > > so just share the raw data tables.
> > > > > > >
> > > > > > > I suspect there's more UCS-2 code that can be shared, in the NLS code
> > > > > > > and in the UCS-2 code used by the EFI interfaces.
> > > > > > >
> > > > > > > Lightly tested with a module and a monolithic build,
> > > > > > > and just mounting
> > > > > > > itself.
> > > > > > >
> > > > > > > This dupe was found using PMD:
> > > > > > > https://pmd.github.io/pmd/pmd_userdocs_cpd.html
> > > > > > >
> > > > > > > Dave
> > > > > > >
> > > > > > > Version 2
> > > > > > > Moved the shared code to fs/nls after v1 feedback.
> > > > > > > Renamed shared tables from Smb to Nls prefix
> > > > > > > Move UniStrcat as well
> > > > > > > Share the JFS tables
> > > > > > >
> > > > > > > Dr. David Alan Gilbert (4):
> > > > > > > fs/smb: Remove unicode 'lower' tables
> > > > > > > fs/smb: Swing unicode common code from smb->NLS
> > > > > > > fs/smb/client: Use common code in client
> > > > > > > fs/jfs: Use common ucs2 upper case table
> > > > > > >
> > > > > > > fs/jfs/Kconfig | 1 +
> > > > > > > fs/jfs/Makefile | 2 +-
> > > > > > > fs/jfs/jfs_unicode.h | 17 +-
> > > > > > > fs/jfs/jfs_uniupr.c | 121 -------------
> > > > > > > fs/nls/Kconfig | 8 +
> > > > > > > fs/nls/Makefile | 1 +
> > > > > > > fs/nls/nls_ucs2_data.h | 15 ++
> > > > > > > fs/nls/nls_ucs2_utils.c | 144 +++++++++++++++
> > > > > > > fs/nls/nls_ucs2_utils.h | 285 ++++++++++++++++++++++++++++++
> > > > > > > fs/smb/client/Kconfig | 1 +
> > > > > > > fs/smb/client/cifs_unicode.c | 1 -
> > > > > > > fs/smb/client/cifs_unicode.h | 330
> > > > > > > +----------------------------------
> > > > > > > fs/smb/client/cifs_uniupr.h | 239 -------------------------
> > > > > > > fs/smb/server/Kconfig | 1 +
> > > > > > > fs/smb/server/unicode.c | 1 -
> > > > > > > fs/smb/server/unicode.h | 325
> > > > > > > +---------------------------------
> > > > > > > fs/smb/server/uniupr.h | 268 ----------------------------
> > > > > > > 17 files changed, 467 insertions(+), 1293 deletions(-)
> > > > > > > delete mode 100644 fs/jfs/jfs_uniupr.c
> > > > > > > create mode 100644 fs/nls/nls_ucs2_data.h
> > > > > > > create mode 100644 fs/nls/nls_ucs2_utils.c
> > > > > > > create mode 100644 fs/nls/nls_ucs2_utils.h
> > > > > > > delete mode 100644 fs/smb/client/cifs_uniupr.h
> > > > > > > delete mode 100644 fs/smb/server/uniupr.h
> > > > > > >
> > > > > > > --
> > > > > > > 2.41.0
> > > > > > >
> > > > > > --
> > > > > > -----Open up your eyes, open up your mind, open up your code -------
> > > > > > / Dr. David Alan Gilbert | Running GNU/Linux | Happy \
> > > > > > \ dave @ treblig.org | | In Hex /
> > > > > > \ _________________________|_____ http://www.treblig.org |_______/
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Thanks,
> > > > >
> > > > > Steve
> > > >
> > > >
> > > >
> > > > --
> > > > Thanks,
> > > >
> > > > Steve
> >
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
Powered by blists - more mailing lists