| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230720062813.4126751-30-zhaotianrui@loongson.cn>
Date: Thu, 20 Jul 2023 14:28:12 +0800
From: Tianrui Zhao <zhaotianrui@...ngson.cn>
To: linux-kernel@...r.kernel.org, kvm@...r.kernel.org
Cc: Paolo Bonzini <pbonzini@...hat.com>,
Huacai Chen <chenhuacai@...nel.org>,
WANG Xuerui <kernel@...0n.name>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
loongarch@...ts.linux.dev, Jens Axboe <axboe@...nel.dk>,
Mark Brown <broonie@...nel.org>,
Alex Deucher <alexander.deucher@....com>,
Oliver Upton <oliver.upton@...ux.dev>, maobibo@...ngson.cn,
Xi Ruoyao <xry111@...111.site>, zhaotianrui@...ngson.cn,
Huacai Chen <chenhuacai@...ngson.cn>
Subject: [PATCH v17 29/30] LoongArch: KVM: Supplement kvm document about LoongArch-specific part
Supplement kvm document about LoongArch-specific part, such as add
api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE,
etc.
Reviewed-by: Huacai Chen <chenhuacai@...ngson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@...ngson.cn>
---
Documentation/virt/kvm/api.rst | 70 +++++++++++++++++++++++++++++-----
1 file changed, 61 insertions(+), 9 deletions(-)
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index c0ddd3035462..8ad10ec17ab1 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -416,6 +416,13 @@ Reads the general purpose registers from the vcpu.
__u64 pc;
};
+ /* LoongArch */
+ struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ unsigned long gpr[32];
+ unsigned long pc;
+ };
+
4.12 KVM_SET_REGS
-----------------
@@ -506,7 +513,7 @@ translation mode.
------------------
:Capability: basic
-:Architectures: x86, ppc, mips, riscv
+:Architectures: x86, ppc, mips, riscv, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_interrupt (in)
:Returns: 0 on success, negative on failure.
@@ -592,6 +599,14 @@ b) KVM_INTERRUPT_UNSET
This is an asynchronous vcpu ioctl and can be invoked from any thread.
+LOONGARCH:
+^^^^^^^^^^
+
+Queues an external interrupt to be injected into the virtual CPU. A negative
+interrupt number dequeues the interrupt.
+
+This is an asynchronous vcpu ioctl and can be invoked from any thread.
+
4.17 KVM_DEBUG_GUEST
--------------------
@@ -737,7 +752,7 @@ signal mask.
----------------
:Capability: basic
-:Architectures: x86
+:Architectures: x86, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_fpu (out)
:Returns: 0 on success, -1 on error
@@ -746,7 +761,7 @@ Reads the floating point state from the vcpu.
::
- /* for KVM_GET_FPU and KVM_SET_FPU */
+ /* x86: for KVM_GET_FPU and KVM_SET_FPU */
struct kvm_fpu {
__u8 fpr[8][16];
__u16 fcw;
@@ -761,12 +776,21 @@ Reads the floating point state from the vcpu.
__u32 pad2;
};
+ /* LoongArch: for KVM_GET_FPU and KVM_SET_FPU */
+ struct kvm_fpu {
+ __u32 fcsr;
+ __u64 fcc;
+ struct kvm_fpureg {
+ __u64 val64[4];
+ }fpr[32];
+ };
+
4.23 KVM_SET_FPU
----------------
:Capability: basic
-:Architectures: x86
+:Architectures: x86, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_fpu (in)
:Returns: 0 on success, -1 on error
@@ -775,7 +799,7 @@ Writes the floating point state to the vcpu.
::
- /* for KVM_GET_FPU and KVM_SET_FPU */
+ /* x86: for KVM_GET_FPU and KVM_SET_FPU */
struct kvm_fpu {
__u8 fpr[8][16];
__u16 fcw;
@@ -790,6 +814,15 @@ Writes the floating point state to the vcpu.
__u32 pad2;
};
+ /* LoongArch: for KVM_GET_FPU and KVM_SET_FPU */
+ struct kvm_fpu {
+ __u32 fcsr;
+ __u64 fcc;
+ struct kvm_fpureg {
+ __u64 val64[4];
+ }fpr[32];
+ };
+
4.24 KVM_CREATE_IRQCHIP
-----------------------
@@ -1387,7 +1420,7 @@ documentation when it pops into existence).
-------------------
:Capability: KVM_CAP_ENABLE_CAP
-:Architectures: mips, ppc, s390, x86
+:Architectures: mips, ppc, s390, x86, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_enable_cap (in)
:Returns: 0 on success; -1 on error
@@ -1442,7 +1475,7 @@ for vm-wide capabilities.
---------------------
:Capability: KVM_CAP_MP_STATE
-:Architectures: x86, s390, arm64, riscv
+:Architectures: x86, s390, arm64, riscv, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_mp_state (out)
:Returns: 0 on success; -1 on error
@@ -1460,7 +1493,7 @@ Possible values are:
========================== ===============================================
KVM_MP_STATE_RUNNABLE the vcpu is currently running
- [x86,arm64,riscv]
+ [x86,arm64,riscv,loongarch]
KVM_MP_STATE_UNINITIALIZED the vcpu is an application processor (AP)
which has not yet received an INIT signal [x86]
KVM_MP_STATE_INIT_RECEIVED the vcpu has received an INIT signal, and is
@@ -1516,11 +1549,14 @@ For riscv:
The only states that are valid are KVM_MP_STATE_STOPPED and
KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
+On LoongArch, only the KVM_MP_STATE_RUNNABLE state is used to reflect
+whether the vcpu is runnable.
+
4.39 KVM_SET_MP_STATE
---------------------
:Capability: KVM_CAP_MP_STATE
-:Architectures: x86, s390, arm64, riscv
+:Architectures: x86, s390, arm64, riscv, loongarch
:Type: vcpu ioctl
:Parameters: struct kvm_mp_state (in)
:Returns: 0 on success; -1 on error
@@ -1538,6 +1574,9 @@ For arm64/riscv:
The only states that are valid are KVM_MP_STATE_STOPPED and
KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not.
+On LoongArch, only the KVM_MP_STATE_RUNNABLE state is used to reflect
+whether the vcpu is runnable.
+
4.40 KVM_SET_IDENTITY_MAP_ADDR
------------------------------
@@ -2839,6 +2878,19 @@ Following are the RISC-V D-extension registers:
0x8020 0000 0600 0020 fcsr Floating point control and status register
======================= ========= =============================================
+LoongArch registers are mapped using the lower 32 bits. The upper 16 bits of
+that is the register group type.
+
+LoongArch csr registers are used to control guest cpu or get status of guest
+cpu, and they have the following id bit patterns::
+
+ 0x9030 0000 0001 00 <reg:5> <sel:3> (64-bit)
+
+LoongArch KVM control registers are used to implement some new defined functions
+such as set vcpu counter or reset vcpu, and they have the following id bit patterns::
+
+ 0x9030 0000 0002 <reg:16>
+
4.69 KVM_GET_ONE_REG
--------------------
--
2.39.1
Powered by blists - more mailing lists