[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230721221552.1973203-6-contact@jookia.org>
Date: Sat, 22 Jul 2023 08:15:53 +1000
From: John Watts <contact@...kia.org>
To: linux-sunxi@...ts.linux.dev
Cc: Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org, John Watts <contact@...kia.org>
Subject: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1
The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.
Signed-off-by: John Watts <contact@...kia.org>
---
drivers/net/can/Kconfig | 4 ++--
drivers/net/can/sun4i_can.c | 12 +++++++++++-
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index a5c5036dfb94..e626de33e735 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -185,10 +185,10 @@ config CAN_SLCAN
config CAN_SUN4I
tristate "Allwinner A10 CAN controller"
- depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+ depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST
help
Say Y here if you want to use CAN controller found on Allwinner
- A10/A20 SoCs.
+ A10/A20/D1 SoCs.
To compile this driver as a module, choose M here: the module will
be called sun4i_can.
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 1f90fe6dbb8b..c508a328e38d 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -91,6 +91,8 @@
#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
+#define SUN4I_REG_ACPC_ADDR_D1 0x0028 /* CAN Acceptance Code 0 on the D1 */
+#define SUN4I_REG_ACPM_ADDR_D1 0x002C /* CAN Acceptance Mask 0 on the D1 */
#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
@@ -779,6 +781,11 @@ static const struct sun4ican_quirks sun4ican_quirks_r40 = {
.acp_offset = 0,
};
+static const struct sun4ican_quirks sun4ican_quirks_d1 = {
+ .has_reset = true,
+ .acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR),
+};
+
static const struct of_device_id sun4ican_of_match[] = {
{
.compatible = "allwinner,sun4i-a10-can",
@@ -789,6 +796,9 @@ static const struct of_device_id sun4ican_of_match[] = {
}, {
.compatible = "allwinner,sun8i-r40-can",
.data = &sun4ican_quirks_r40
+ }, {
+ .compatible = "allwinner,sun20i-d1-can",
+ .data = &sun4ican_quirks_d1
}, {
/* sentinel */
},
@@ -913,4 +923,4 @@ module_platform_driver(sun4i_can_driver);
MODULE_AUTHOR("Peter Chen <xingkongcp@...il.com>");
MODULE_AUTHOR("Gerhard Bertelsmann <info@...hard-bertelsmann.de>");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");
+MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)");
--
2.41.0
Powered by blists - more mailing lists