[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230721072147.59121-3-tony@atomide.com>
Date: Fri, 21 Jul 2023 10:21:41 +0300
From: Tony Lindgren <tony@...mide.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@...el.com>,
Dhruva Gole <d-gole@...com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
John Ogness <john.ogness@...utronix.de>,
Johan Hovold <johan@...nel.org>,
Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
Vignesh Raghavendra <vigneshr@...com>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
linux-omap@...r.kernel.org
Subject: [PATCH v3 2/3] serial: core: Fix serial core port id to not use port->line
The serial core port id should be serial core controller specific port
instance, which is not always the port->line index.
For example, 8250 driver maps a number of legacy ports, and when a
hardware specific device driver takes over, we typically have one
driver instance for each port. Let's instead add port->port_id to
keep track serial ports mapped to each serial core controller instance.
Currently this is only a cosmetic issue for the serial core port device
names. The issue can be noticed looking at /sys/bus/serial-base/devices
for example though. Let's fix the issue to avoid port addressing issues
later on.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
drivers/tty/serial/8250/8250_core.c | 2 ++
drivers/tty/serial/serial_base_bus.c | 2 +-
include/linux/serial_core.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -497,6 +497,7 @@ static struct uart_8250_port *serial8250_setup_port(int index)
up = &serial8250_ports[index];
up->port.line = index;
+ up->port.port_id = index;
serial8250_init_port(up);
if (!base_ops)
@@ -1040,6 +1041,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up)
uart_remove_one_port(&serial8250_reg, &uart->port);
uart->port.ctrl_id = up->port.ctrl_id;
+ uart->port.port_id = up->port.port_id;
uart->port.iobase = up->port.iobase;
uart->port.membase = up->port.membase;
uart->port.irq = up->port.irq;
diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c
--- a/drivers/tty/serial/serial_base_bus.c
+++ b/drivers/tty/serial/serial_base_bus.c
@@ -136,7 +136,7 @@ struct serial_port_device *serial_base_port_add(struct uart_port *port,
err = serial_base_device_init(port, &port_dev->dev,
&ctrl_dev->dev, &serial_port_type,
serial_base_port_release,
- port->line);
+ port->port_id);
if (err)
goto err_put_device;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -460,6 +460,7 @@ struct uart_port {
int (*iso7816_config)(struct uart_port *,
struct serial_iso7816 *iso7816);
unsigned int ctrl_id; /* optional serial core controller id */
+ unsigned int port_id; /* optional serial core port id */
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
--
2.41.0
Powered by blists - more mailing lists