[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230721-liquid-stench-3721d2483433@spud>
Date: Fri, 21 Jul 2023 10:18:17 +0100
From: Conor Dooley <conor@...nel.org>
To: Andrew Lunn <andrew@...n.ch>
Cc: Samin Guo <samin.guo@...rfivetech.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
netdev@...r.kernel.org, Peter Geis <pgwipeout@...il.com>,
Frank <Frank.Sae@...or-comm.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Yanhong Wang <yanhong.wang@...rfivetech.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver
strength cfg
On Thu, Jul 20, 2023 at 06:00:15PM +0200, Andrew Lunn wrote:
> > + motorcomm,rx-clk-drv-microamp:
> > + description: |
> > + drive strength of rx_clk rgmii pad.
> > + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> > + be configured with hardware pull-up resistors to match the SOC voltage
> > + (usually 1.8V).
> > + The software can read the registers to obtain the LDO voltage and configure
> > + the legal drive strength(curren).
> > + =====================================================
> > + | voltage | curren Available (uA) |
>
> current has a t.
>
> > + =====================================================
> > + | voltage | curren Available (uA) |
>
> Reviewed-by: Andrew Lunn <andrew@...n.ch>
With the fixup,
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
Thanks,
Conor.
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists