[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230722084004.21857-3-tudor.ambarus@linaro.org>
Date: Sat, 22 Jul 2023 11:39:57 +0300
From: Tudor Ambarus <tudor.ambarus@...aro.org>
To: tkuw584924@...il.com, takahiro.kuwano@...ineon.com,
michael@...le.cc
Cc: pratyush@...nel.org, linux-mtd@...ts.infradead.org,
linux-kernel@...r.kernel.org, bacem.daassi@...ineon.com,
miquel.raynal@...tlin.com, richard@....at,
Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>,
stable@...r.kernel.org
Subject: [PATCH v3 02/11] mtd: spi-nor: spansion: preserve CFR2V[7] when writing MEMLAT
From: Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>
CFR2V[7] is assigned to Flash's address mode (3- or 4-ybte) and must not
be changed when writing MEMLAT (CFR2V[3:0]). CFR2V shall be used in a read,
update, write back fashion.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>
Cc: stable@...r.kernel.org
---
drivers/mtd/spi-nor/spansion.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6b2532ed053c..6460d2247bdf 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -4,6 +4,7 @@
* Copyright (C) 2014, Freescale Semiconductor, Inc.
*/
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/mtd/spi-nor.h>
@@ -28,6 +29,7 @@
#define SPINOR_REG_CYPRESS_CFR2 0x3
#define SPINOR_REG_CYPRESS_CFR2V \
(SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_CFR2)
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK GENMASK(3, 0)
#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24 0xb
#define SPINOR_REG_CYPRESS_CFR2_ADRBYT BIT(7)
#define SPINOR_REG_CYPRESS_CFR3 0x4
@@ -161,8 +163,18 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
int ret;
u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
+ op = (struct spi_mem_op)
+ CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+ SPINOR_REG_CYPRESS_CFR2V, 0, buf);
+
+ ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+ if (ret)
+ return ret;
+
/* Use 24 dummy cycles for memory array reads. */
- *buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
+ *buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK;
+ *buf |= FIELD_PREP(SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK,
+ SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24);
op = (struct spi_mem_op)
CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
SPINOR_REG_CYPRESS_CFR2V, 1, buf);
--
2.34.1
Powered by blists - more mailing lists