[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230724154510.2532561-1-xiaolei.wang@windriver.com>
Date: Mon, 24 Jul 2023 23:45:10 +0800
From: Xiaolei Wang <xiaolei.wang@...driver.com>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
richardcochran@...il.com
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3] ARM: dts: imx: Set default tuning step for imx7d usdhc
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@...driver.com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
---
v3:
* Add the timeout message to commit log
v2:
* Refer to https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
and add the following attributes for all usdhc of imx7:
fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 54026c2c93fa..6ffb428dc939 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -1184,6 +1184,8 @@ usdhc1: mmc@...40000 {
<&clks IMX7D_USDHC1_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
status = "disabled";
};
@@ -1196,6 +1198,8 @@ usdhc2: mmc@...50000 {
<&clks IMX7D_USDHC2_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
status = "disabled";
};
@@ -1208,6 +1212,8 @@ usdhc3: mmc@...60000 {
<&clks IMX7D_USDHC3_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-step = <2>;
+ fsl,tuning-start-tap = <20>;
status = "disabled";
};
--
2.25.1
Powered by blists - more mailing lists