[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230724075833.2763190-1-peng.fan@oss.nxp.com>
Date: Mon, 24 Jul 2023 15:58:23 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
shawnguo@...nel.org, s.hauer@...gutronix.de
Cc: kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: [PATCH V2 00/10] arm64: dts: imx8ulp: add more nodes
From: Peng Fan <peng.fan@....com>
V2:
Add blank line between property and child node in patch 3
Move compatible in the beginning in patch 8
For patch 9, the pinctrl settings are same, because drive strengh only
has a enable/disable bit.
Add flexspi, cm33, thermal, cpuidle, reserved memory nodes
Enable flexspi, lpi2c7, spi-nor, cm33 for i.MX8ULP-EVK
Set default clock for SDHC
Haibo Chen (3):
arm64: dts: imx8ulp: add flexspi node
arm64: dts: imx8ulp-evk: add 100MHz/200MHz pinctrl setting for eMMC
arm64: dts: imx8ulp-evk: enable lpi2c7 bus
Han Xu (1):
arm64: dts: imx8ulp-evk: add spi-nor device support
Peng Fan (6):
arm64: dts: imx8ulp: add cm33 node
arm64: dts: imx8ulp: set default clock for SDHC
arm64: dts: imx8ulp: add thermal node
arm64: dts: imx8ulp: add cpuidle node
arm64: dts: imx8ulp-evk: add reserved memory for cma
arm64: dts: imx8ulp-evk: enable CM33 node
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 145 ++++++++++++++++--
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 73 ++++++++-
2 files changed, 205 insertions(+), 13 deletions(-)
--
2.37.1
Powered by blists - more mailing lists