lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230724081247.4779-7-tudor.ambarus@linaro.org>
Date:   Mon, 24 Jul 2023 11:12:42 +0300
From:   Tudor Ambarus <tudor.ambarus@...aro.org>
To:     tkuw584924@...il.com, takahiro.kuwano@...ineon.com,
        michael@...le.cc
Cc:     pratyush@...nel.org, linux-mtd@...ts.infradead.org,
        linux-kernel@...r.kernel.org, bacem.daassi@...ineon.com,
        miquel.raynal@...tlin.com, richard@....at,
        Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>
Subject: [RESEND PATCH v3 06/11] mtd: spi-nor: spansion: add MCP support in set_octal_dtr()

From: Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>

Infineon multi-chip package (MCP) devices require the Octal DTR
configuraion to be set on each die. We can access to configuration
registers in each die by using params->n_dice and params->vreg_offset[]
populated from SFDP. Add MCP support in set_octal_dtr().

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@...ineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 5b6f36b56e9f..28d0a995f3b9 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -206,17 +206,19 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
 	u64 addr;
-	int ret;
+	int i, ret;
 
-	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR2;
-	ret = cypress_nor_set_memlat(nor, addr);
-	if (ret)
-		return ret;
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR2;
+		ret = cypress_nor_set_memlat(nor, addr);
+		if (ret)
+			return ret;
 
-	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
-	ret = cypress_nor_set_octal_dtr_bits(nor, addr);
-	if (ret)
-		return ret;
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_octal_dtr_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
 
 	/* Read flash ID to make sure the switch was successful. */
 	ret = spi_nor_read_id(nor, nor->addr_nbytes, 3, buf,
@@ -251,14 +253,17 @@ static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
 
 static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 {
+	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
 	u64 addr;
-	int ret;
+	int i, ret;
 
-	addr = nor->params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
-	ret = cypress_nor_set_single_spi_bits(nor, addr);
-	if (ret)
-		return ret;
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_single_spi_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
 
 	/* Read flash ID to make sure the switch was successful. */
 	ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ