lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230724105546.1964059-2-carlos.song@nxp.com>
Date:   Mon, 24 Jul 2023 18:55:45 +0800
From:   carlos.song@....com
To:     andi.shyti@...nel.org, aisheng.dong@....com, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com
Cc:     carlos.song@....com, xiaoning.wang@....com, haibo.chen@....com,
        linux-imx@....com, linux-i2c@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] i2c: imx-lpi2c: add bus recovery feature

From: Carlos Song <carlos.song@....com>

Add bus recovery feature for LPI2C.
Need add gpio pinctrl, scl-gpios and sda-gpios configuration in dts.

Signed-off-by: Clark Wang <xiaoning.wang@....com>
Signed-off-by: Carlos Song <carlos.song@....com>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 51 ++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 158de0b7f030..e93ff3b5373c 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -107,6 +107,7 @@ struct lpi2c_imx_struct {
 	unsigned int		txfifosize;
 	unsigned int		rxfifosize;
 	enum lpi2c_imx_mode	mode;
+	struct i2c_bus_recovery_info rinfo;
 };
 
 static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
@@ -134,6 +135,8 @@ static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -191,6 +194,8 @@ static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			break;
 		}
 		schedule();
@@ -323,6 +328,8 @@ static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
 
 		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
+			if (lpi2c_imx->adapter.bus_recovery_info)
+				i2c_recover_bus(&lpi2c_imx->adapter);
 			return -ETIMEDOUT;
 		}
 		schedule();
@@ -525,6 +532,44 @@ static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int lpi2c_imx_init_recovery_info(struct lpi2c_imx_struct *lpi2c_imx,
+				  struct platform_device *pdev)
+{
+	struct i2c_bus_recovery_info *rinfo = &lpi2c_imx->rinfo;
+
+	/*
+	 * When there is no pinctrl state "gpio" in device tree, it means i2c
+	 * recovery function is not needed, so it is not a problem even if
+	 * pinctrl state "gpio" is missing. Just do not initialize the I2C bus
+	 * recovery information.
+	 */
+	rinfo->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(rinfo->pinctrl)) {
+		if (PTR_ERR(rinfo->pinctrl) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+		return PTR_ERR(rinfo->pinctrl);
+	} else if (!rinfo->pinctrl) {
+		return -ENODEV;
+	}
+
+	if (IS_ERR(pinctrl_lookup_state(rinfo->pinctrl, "gpio"))) {
+		dev_dbg(&pdev->dev, "recovery information incomplete\n");
+		return 0;
+	}
+
+	lpi2c_imx->adapter.bus_recovery_info = rinfo;
+
+	return 0;
+}
+
 static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
@@ -603,6 +648,12 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
 	lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
 
+	/* Init optional bus recovery function */
+	ret = lpi2c_imx_init_recovery_info(lpi2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
+
 	ret = i2c_add_adapter(&lpi2c_imx->adapter);
 	if (ret)
 		goto rpm_disable;
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ