lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230725142343.1724130-2-hugo@hugovil.com>
Date:   Tue, 25 Jul 2023 10:23:33 -0400
From:   Hugo Villeneuve <hugo@...ovil.com>
To:     gregkh@...uxfoundation.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        jirislaby@...nel.org, jringle@...dpoint.com,
        isaac.true@...onical.com, jesse.sung@...onical.com,
        l.perczak@...lintechnologies.com, tomasz.mon@...lingroup.com
Cc:     linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, hugo@...ovil.com,
        linux-gpio@...r.kernel.org,
        Hugo Villeneuve <hvilleneuve@...onoff.com>,
        stable@...r.kernel.org,
        Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
        Lech Perczak <lech.perczak@...lingroup.com>
Subject: [PATCH v9 01/10] serial: sc16is7xx: fix broken port 0 uart init

From: Hugo Villeneuve <hvilleneuve@...onoff.com>

The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.

The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: <stable@...r.kernel.org> # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@...lingroup.com>
Tested-by: Lech Perczak <lech.perczak@...lingroup.com>
---
 drivers/tty/serial/sc16is7xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 2e7e7c409cf2..8ae2afc76a9b 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1436,6 +1436,7 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iobase	= i;
+		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ