[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230725185802.GA658415@bhelgaas>
Date: Tue, 25 Jul 2023 13:58:02 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Sricharan Ramabadhran <quic_srichara@...cinc.com>
Cc: agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
robh@...nel.org, mani@...nel.org, lpieralisi@...nel.org,
bhelgaas@...gle.com, kw@...ux.com, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
gregkh@...uxfoundation.org, dmitry.baryshkov@...aro.org,
stable@...r.kernel.org
Subject: Re: [PATCH V5] PCI: qcom: Fixing broken pcie enumeration for 2_3_3
configs ops
On Mon, Jul 24, 2023 at 12:04:29PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074 2_3_3 post_init.
> PCIe slave addr register offset is 0x358, but was wrongly changed to
> 0x168 as a part of commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix
> from register definitions"). Fixing it, by using the right macro and remove
> the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
>
> Without this access to the registers of slave addr space like iATU etc
> are broken leading to pcie enumeration failure.
This is harder to review than it should be because it mentions
"IPQ8074 2_3_3 post_init" instead of the specific
qcom_pcie_post_init_2_3_3().
Also it says the offset was changed to 0x168, when it was actually
changed to 0x16C.
Also it is not clear that PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is the same
as the "PCIe slave addr register offset" (and this is apparently the
offset of the slave address space *size*, not the offset of the slave
address itself).
Maybe whoever applies this can fix these up. At the same time,
will you please:
s/Fixing/Fix/ in subject and commit log
s/pcie/PCIe/
> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Cc: <Stable@...r.kernel.org>
> Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
> ---
> [v5] Fixed subject, commit log
> [v4] Fix commit sub and added '<mani@...nel.org>' reviewed-by tag
> [v3] Added reviewed-by tag, fixed subject, commit text
> [v2] Fixed the 'fixes tag' correctly, subject, right macro usage
>
> drivers/pci/controller/dwc/pcie-qcom.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..8418894b3de7 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
> #define PARF_PHY_REFCLK 0x4c
> #define PARF_CONFIG_BITS 0x50
> #define PARF_DBI_BASE_ADDR 0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
> @@ -810,8 +809,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> u32 val;
>
> - writel(SLV_ADDR_SPACE_SZ,
> - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> + writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
>
> val = readl(pcie->parf + PARF_PHY_CTRL);
> val &= ~PHY_TEST_PWR_DOWN;
> --
> 2.34.1
>
Powered by blists - more mailing lists