| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230725205933.yqvdy3h7hewbjosy@skbuf>
Date: Tue, 25 Jul 2023 23:59:33 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: Arnd Bergmann <arnd@...nel.org>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Simon Horman <simon.horman@...igine.com>,
Arnd Bergmann <arnd@...db.de>,
Russell King <linux@...linux.org.uk>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Josua Mayer <josua@...id-run.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Sean Anderson <sean.anderson@...o.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] [v2] dpaa: avoid linking objects into multiple modules
Hi Arnd,
On Tue, Jul 25, 2023 at 10:39:40PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@...db.de>
>
> Each object file contains information about which module it gets linked
> into, so linking the same file into multiple modules now causes a warning:
>
> scripts/Makefile.build:254: drivers/net/ethernet/freescale/dpaa2/Makefile: dpaa2-mac.o is added to multiple modules: fsl-dpaa2-eth fsl-dpaa2-switch
> scripts/Makefile.build:254: drivers/net/ethernet/freescale/dpaa2/Makefile: dpmac.o is added to multiple modules: fsl-dpaa2-eth fsl-dpaa2-switch
>
> Chang the way that dpaa2 is built by moving the two common files into a
> separate module with exported symbols instead.
>
> To avoid a link failure when the switch driver is built-in, but the dpio driver
> is a loadable module, add the same dependency in there that exists for
> the ethernet driver.
Unrelated change should be separate.
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
> v2: add missing module description
There was a previous attempt at this before, by Alexander Lobakin:
https://patchwork.kernel.org/project/netdevbpf/patch/20221119225650.1044591-16-alobakin@pm.me/
but it seems he wasn't persistent enough with it.
Something which I liked better in his proposal was the naming of the
config option (FSL_DPAA2_MAC) and of the new module (fsl-dpaa2-mac).
Something which I like better in your proposal is the straightforward
EXPORT_SYMBOL_GPL rather than EXPORT_SYMBOL_NS_GPL() whose purpose I did
not understand.
A mix of the 2 would be great.
> ---
> drivers/net/ethernet/freescale/Makefile | 4 +---
> drivers/net/ethernet/freescale/dpaa2/Kconfig | 1 +
> drivers/net/ethernet/freescale/dpaa2/Makefile | 9 +++++----
> drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 12 ++++++++++++
> 4 files changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
> index de7b318422330..c63e0c090f8f7 100644
> --- a/drivers/net/ethernet/freescale/Makefile
> +++ b/drivers/net/ethernet/freescale/Makefile
> @@ -22,6 +22,4 @@ ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
> obj-$(CONFIG_FSL_FMAN) += fman/
> obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
>
> -obj-$(CONFIG_FSL_DPAA2_ETH) += dpaa2/
> -
> -obj-y += enetc/
> +obj-y += enetc/ dpaa2/
> diff --git a/drivers/net/ethernet/freescale/dpaa2/Kconfig b/drivers/net/ethernet/freescale/dpaa2/Kconfig
> index d029b69c3f183..4e26b5a4bc5c4 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/Kconfig
> +++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
> @@ -32,6 +32,7 @@ config FSL_DPAA2_PTP_CLOCK
>
> config FSL_DPAA2_SWITCH
> tristate "Freescale DPAA2 Ethernet Switch"
> + depends on FSL_MC_BUS && FSL_MC_DPIO
> depends on BRIDGE || BRIDGE=n
> depends on NET_SWITCHDEV
> help
> diff --git a/drivers/net/ethernet/freescale/dpaa2/Makefile b/drivers/net/ethernet/freescale/dpaa2/Makefile
> index 1b05ba8d1cbff..c042d2c27926c 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/Makefile
> +++ b/drivers/net/ethernet/freescale/dpaa2/Makefile
> @@ -3,15 +3,16 @@
> # Makefile for the Freescale DPAA2 Ethernet controller
> #
>
> -obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o
> +obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o fsl-dpaa2-common.o
> obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += fsl-dpaa2-ptp.o
> -obj-$(CONFIG_FSL_DPAA2_SWITCH) += fsl-dpaa2-switch.o
> +obj-$(CONFIG_FSL_DPAA2_SWITCH) += fsl-dpaa2-switch.o fsl-dpaa2-common.o
I am not completely sure how this works. Can fsl-dpaa2-common appear
both in obj-y (added by $(CONFIG_FSL_DPAA2_ETH)) and in obj-m (added by
$(CONFIG_FSL_DPAA2_SWITCH))? Olek proposed the introduction of a new,
hidden and selectable tristate FSL_DPAA2_MAC. At least I understand how
that works.
>
> -fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o dpaa2-mac.o dpmac.o dpaa2-eth-devlink.o dpaa2-xsk.o
> +fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o dpaa2-eth-devlink.o dpaa2-xsk.o
> fsl-dpaa2-eth-${CONFIG_FSL_DPAA2_ETH_DCB} += dpaa2-eth-dcb.o
> fsl-dpaa2-eth-${CONFIG_DEBUG_FS} += dpaa2-eth-debugfs.o
> fsl-dpaa2-ptp-objs := dpaa2-ptp.o dprtc.o
> -fsl-dpaa2-switch-objs := dpaa2-switch.o dpaa2-switch-ethtool.o dpsw.o dpaa2-switch-flower.o dpaa2-mac.o dpmac.o
> +fsl-dpaa2-switch-objs := dpaa2-switch.o dpaa2-switch-ethtool.o dpsw.o dpaa2-switch-flower.o
> +fsl-dpaa2-common-objs += dpaa2-mac.o dpmac.o
>
> # Needed by the tracing framework
> CFLAGS_dpaa2-eth.o := -I$(src)
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> index a69bb22c37eab..c51dbd84d199e 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> @@ -348,6 +348,7 @@ void dpaa2_mac_start(struct dpaa2_mac *mac)
>
> phylink_start(mac->phylink);
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_start);
>
> void dpaa2_mac_stop(struct dpaa2_mac *mac)
> {
> @@ -358,6 +359,7 @@ void dpaa2_mac_stop(struct dpaa2_mac *mac)
> if (mac->serdes_phy)
> phy_power_off(mac->serdes_phy);
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_stop);
>
> int dpaa2_mac_connect(struct dpaa2_mac *mac)
> {
> @@ -450,6 +452,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
>
> return err;
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_connect);
>
> void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
> {
> @@ -462,6 +465,7 @@ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
> of_phy_put(mac->serdes_phy);
> mac->serdes_phy = NULL;
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_disconnect);
>
> int dpaa2_mac_open(struct dpaa2_mac *mac)
> {
> @@ -510,6 +514,7 @@ int dpaa2_mac_open(struct dpaa2_mac *mac)
> dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
> return err;
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_open);
>
> void dpaa2_mac_close(struct dpaa2_mac *mac)
> {
> @@ -519,6 +524,7 @@ void dpaa2_mac_close(struct dpaa2_mac *mac)
> if (mac->fw_node)
> fwnode_handle_put(mac->fw_node);
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_close);
>
> static char dpaa2_mac_ethtool_stats[][ETH_GSTRING_LEN] = {
> [DPMAC_CNT_ING_ALL_FRAME] = "[mac] rx all frames",
> @@ -557,6 +563,7 @@ int dpaa2_mac_get_sset_count(void)
> {
> return DPAA2_MAC_NUM_STATS;
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_get_sset_count);
>
> void dpaa2_mac_get_strings(u8 *data)
> {
> @@ -568,6 +575,7 @@ void dpaa2_mac_get_strings(u8 *data)
> p += ETH_GSTRING_LEN;
> }
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_get_strings);
>
> void dpaa2_mac_get_ethtool_stats(struct dpaa2_mac *mac, u64 *data)
> {
> @@ -587,3 +595,7 @@ void dpaa2_mac_get_ethtool_stats(struct dpaa2_mac *mac, u64 *data)
> *(data + i) = value;
> }
> }
> +EXPORT_SYMBOL_GPL(dpaa2_mac_get_ethtool_stats);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("DPAA2 Ethernet core library");
s/core/MAC/ everywhere
> --
> 2.39.2
>
Also, the commit message prefix is wrong. "dpaa:" gets used for "drivers/net/ethernet/freescale/dpaa/".
DPAA(1) and DPAA2 have as much in common as King Charles II and Charles III.
pw-bot: cr
Powered by blists - more mailing lists