[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230726171056.GA1593547-robh@kernel.org>
Date: Wed, 26 Jul 2023 11:10:56 -0600
From: Rob Herring <robh@...nel.org>
To: Nishanth Menon <nm@...com>
Cc: Tony Lindgren <tony@...mide.com>,
BenoƮt Cousson <bcousson@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Vibhore Vardhan <vibhore@...com>, Dhruva Gole <d-gole@...com>,
linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 4/5] dt-bindings: opp: Convert ti-omap5-opp-supply.txt to
yaml binding
On Mon, Jul 24, 2023 at 10:39:10AM -0500, Nishanth Menon wrote:
> Rename ti-omap5-opp-supply to be bit more generic omap-opp-supply and
> convert the binding to yaml.
>
> Signed-off-by: Nishanth Menon <nm@...com>
> ---
> .../bindings/opp/ti,omap-opp-supply.yaml | 108 ++++++++++++++++++
> .../bindings/opp/ti-omap5-opp-supply.txt | 63 ----------
> 2 files changed, 108 insertions(+), 63 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
> delete mode 100644 Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
>
> diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
> new file mode 100644
> index 000000000000..ff1b3d8fea31
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments OMAP compatible OPP supply description
Drop "description"
> +
> +description: |
> + OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which
> + contain data that can be used to adjust voltages programmed for some of their
> + supplies for more efficient operation. This binding provides the information
> + needed to read these values and use them to program the main regulator during
> + an OPP transitions.
> +
> + Also, some supplies may have an associated vbb-supply which is an Adaptive Body
> + Bias regulator which much be transitioned in a specific sequence with regards
> + to the vdd-supply and clk when making an OPP transition. By supplying two
> + regulators to the device that will undergo OPP transitions we can make use
> + of the multi regulator binding that is part of the OPP core described
> + to describe both regulators needed by the platform.
> +
> +maintainers:
> + - Nishanth Menon <nm@...com>
> +
> +properties:
> + $nodename:
> + pattern: '^opp-supply(@[0-9a-f]+)?$'
> +
> + compatible:
> + oneOf:
> + - description: Basic OPP supply controlling VDD and VBB
> + items:
> + - const: ti,omap-opp-supply
> + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with
> + VBB.
> + items:
> + - const: ti,omap5-opp-supply
> + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB
> + items:
> + - const: ti,omap5-core-opp-supply
> +
> + reg:
> + description: Address and length of the efuse register set for the device
Drop
> + maxItems: 1
> +
> + ti,absolute-max-voltage-uv:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Absolute maximum voltage for the OPP supply
> +
> + ti,efuse-settings:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + description: An array of u32 tuple items providing information about
> + optimized efuse configuration. Each item consists of the following
> + voltage_in_uV - reference voltage (OPP Voltage)
> + efuse_offset - efuse offset fromr eg where the optimized voltage is
> + stored.
> + items:
> + minItems: 2
> + maxItems: 2
Constraints on the values?
> + minItems: 1
> +
> +required:
> + - compatible
> + - ti,absolute-max-voltage-uv
> +
> +allOf:
> + - if:
> + not:
> + properties:
> + compatible:
> + contains:
> + const: ti,omap-opp-supply
> + then:
> + required:
> + - reg
> + - ti,efuse-settings
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + opp_supply_mpu_iva_hd: opp-supply {
Drop unused labels.
> + compatible = "ti,omap-opp-supply";
> + ti,absolute-max-voltage-uv = <1375000>;
> + };
> + - |
> + opp_supply_mpu: opp-supply@...03b20 {
> + compatible = "ti,omap5-opp-supply";
> + reg = <0x4a003b20 0x8>;
> + ti,efuse-settings =
> + /* uV offset */
> + <1060000 0x0>,
> + <1160000 0x4>,
> + <1210000 0x8>;
> + ti,absolute-max-voltage-uv = <1500000>;
> + };
> + - |
> + opp_supply_mpu2: opp-supply@...03b00 {
> + compatible = "ti,omap5-core-opp-supply";
> + reg = <0x4a003b00 0x8>;
> + ti,efuse-settings =
> + /* uV offset */
> + <1060000 0x0>,
> + <1160000 0x4>,
> + <1210000 0x8>;
> + ti,absolute-max-voltage-uv = <1500000>;
> + };
The 3rd example doesn't add anything. It's just different values.
Rob
Powered by blists - more mailing lists