| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230726070322.103871-7-krzysztof.kozlowski@linaro.org>
Date: Wed, 26 Jul 2023 09:03:21 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 7/8] ARM: dts: imx27: drop incorrect reg in fixed regulators
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts | 19 ++++--------
.../imx/imx27-eukrea-mbimxsd27-baseboard.dts | 25 ++++++----------
.../nxp/imx/imx27-phytec-phycard-s-rdk.dts | 19 ++++--------
.../dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 21 ++++++-------
.../dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 30 +++++++------------
5 files changed, 41 insertions(+), 73 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index 6f1e8ce9e76e..a21f1f7c24b8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -54,19 +54,12 @@ user {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_max5821: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "max5821-reg";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
+ reg_max5821: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "max5821-reg";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 9c3ec82ec7e5..145e459625b3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -54,22 +54,15 @@ led2 {
};
};
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "simple-bus";
-
- reg_lcd: regulator@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdreg>;
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "LCD";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_lcd: regulator-0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdreg>;
+ regulator-name = "LCD";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 188639738dc3..25442eba21c1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -33,19 +33,12 @@ timing0: 640x480 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3v3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3v3: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 344e77790152..7f0cd4d3ec2d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -37,18 +37,15 @@ timing0: 240x320 {
};
};
- regulators {
- regulator@2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_csien>;
- reg = <2>;
- regulator-name = "CSI_EN";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
- regulator-always-on;
- };
+ regulator-2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csien>;
+ regulator-name = "CSI_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
};
usbphy {
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 3d10273177e9..7191e10712b9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -15,26 +15,18 @@ memory@...00000 {
reg = <0xa0000000 0x08000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3v3: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- reg_3v3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_5v0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ reg_5v0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
usbphy {
--
2.34.1
Powered by blists - more mailing lists