| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <45cc24c1cf8794782be2ae631ca01bcd136da6d9.1690468707.git.falcon@tinylab.org>
Date: Thu, 27 Jul 2023 23:03:17 +0800
From: Zhangjin Wu <falcon@...ylab.org>
To: w@....eu
Cc: falcon@...ylab.org, arnd@...db.de, linux-kernel@...r.kernel.org,
linux-kselftest@...r.kernel.org, thomas@...ch.de,
Thomas Weißschuh <linux@...ssschuh.net>
Subject: [PATCH v3 4/7] selftests/nolibc: add XARCH and ARCH mapping support
Most of the CPU architectures have different variants, but kernel
usually only accepts parts of them via the ARCH variable, the others
should be customized via kernel config files.
To simplify testing, the external ARCH variable is extended to accept
more CPU variants from user's input, a new internal XARCH variable is
added to save users' ARCH input and used to customize variant specific
variables, at last XARCH is converted to the internal ARCH variable
acceptable by kernel:
e.g. make run ARCH=<one of the supported variants>
/
v
external ARCH from cmdline -> internal XARCH -> internal ARCH for kernel
|
`--> variant specific variables
XARCH and ARCH are carefully mapped to allow users to pass architecture
variants via external ARCH (or XARCH) from cmdline:
- From developers' perspective
- XARCH records the architecture variant from user's ARCH input, after
'override ARCH', ARCH is overridden and mapped from XARCH to the one
supported by kernel
- Map from XARCH to the kernel supported ARCH: 'ARCH_<XARCH> = <ARCH>'
- Configure a default variant for kernel supported ARCH: 'XARCH_<ARCH> = <XARCH>'
- From users' perspective
- ARCH (or XARCH) are architecture variants of a target architecture
- the variants are XARCH names from the "ARCH_<XARCH> = <ARCH>" mapping list
PowerPC is the first user and also a very good reference architecture of
this mapping, it has variants with different combinations of
32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If
the target architecture only has one variant, XARCH is simply an alias
of ARCH, no additional mapping required.
Suggested-by: Willy Tarreau <w@....eu>
Link: https://lore.kernel.org/lkml/20230702171715.GD16233@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@...ssschuh.net>
Signed-off-by: Zhangjin Wu <falcon@...ylab.org>
---
tools/testing/selftests/nolibc/Makefile | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
index 9576f1a0a98d..5afb3e7d7723 100644
--- a/tools/testing/selftests/nolibc/Makefile
+++ b/tools/testing/selftests/nolibc/Makefile
@@ -14,6 +14,14 @@ include $(srctree)/scripts/subarch.include
ARCH = $(SUBARCH)
endif
+# XARCH is used to save user-input ARCH variant
+# configure default variants for target kernel supported architectures
+XARCH := $(or $(XARCH_$(ARCH)),$(ARCH))
+
+# ARCH is supported by kernel
+# map from user input variants to their kernel supported architectures
+override ARCH := $(or $(ARCH_$(XARCH)),$(XARCH))
+
# kernel image names by architecture
IMAGE_i386 = arch/x86/boot/bzImage
IMAGE_x86_64 = arch/x86/boot/bzImage
@@ -24,7 +32,7 @@ IMAGE_mips = vmlinuz
IMAGE_riscv = arch/riscv/boot/Image
IMAGE_s390 = arch/s390/boot/bzImage
IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi
-IMAGE = $(IMAGE_$(ARCH))
+IMAGE = $(IMAGE_$(XARCH))
IMAGE_NAME = $(notdir $(IMAGE))
# default kernel configurations that appear to be usable
@@ -37,10 +45,10 @@ DEFCONFIG_mips = malta_defconfig
DEFCONFIG_riscv = defconfig
DEFCONFIG_s390 = defconfig
DEFCONFIG_loongarch = defconfig
-DEFCONFIG = $(DEFCONFIG_$(ARCH))
+DEFCONFIG = $(DEFCONFIG_$(XARCH))
# extra kernel config files under configs/, include common + architecture specific
-EXTCONFIG = common.config $(ARCH).config
+EXTCONFIG = common.config $(XARCH).config
# optional tests to run (default = all)
TEST =
@@ -55,7 +63,7 @@ QEMU_ARCH_mips = mipsel # works with malta_defconfig
QEMU_ARCH_riscv = riscv64
QEMU_ARCH_s390 = s390x
QEMU_ARCH_loongarch = loongarch64
-QEMU_ARCH = $(QEMU_ARCH_$(ARCH))
+QEMU_ARCH = $(QEMU_ARCH_$(XARCH))
# QEMU_ARGS : some arch-specific args to pass to qemu
QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
@@ -67,7 +75,7 @@ QEMU_ARGS_mips = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_s390 = -M s390-ccw-virtio -m 1G -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
-QEMU_ARGS = $(QEMU_ARGS_$(ARCH)) $(QEMU_ARGS_EXTRA)
+QEMU_ARGS = $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_EXTRA)
# OUTPUT is only set when run from the main makefile, otherwise
# it defaults to this nolibc directory.
@@ -84,7 +92,7 @@ CFLAGS_mips = -EL
CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all))
CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
$(call cc-option,-fno-stack-protector) \
- $(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR)
+ $(CFLAGS_$(XARCH)) $(CFLAGS_STACKPROTECTOR)
LDFLAGS := -s
REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \
@@ -111,12 +119,13 @@ help:
@echo ""
@echo "Currently using the following variables:"
@echo " ARCH = $(ARCH)"
+ @echo " XARCH = $(XARCH)"
@echo " CROSS_COMPILE = $(CROSS_COMPILE)"
@echo " CC = $(CC)"
@echo " OUTPUT = $(OUTPUT)"
@echo " TEST = $(TEST)"
- @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$ARCH]"
- @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$ARCH]"
+ @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]"
+ @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]"
@echo ""
all: run
--
2.25.1
Powered by blists - more mailing lists