[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230727154108.308320-2-umang.jain@ideasonboard.com>
Date: Thu, 27 Jul 2023 21:11:07 +0530
From: Umang Jain <umang.jain@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Lee Jackson <lee.jackson@...ucam.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Shawn Tu <shawnx.tu@...el.com>,
Nicholas Roth <nicholas@...hemail.net>,
Mikhail Rudenko <mike.rudenko@...il.com>,
kieran.bingham@...asonboard.com,
Marco Felsch <m.felsch@...gutronix.de>,
jacopo.mondi@...asonboard.com,
Umang Jain <umang.jain@...asonboard.com>
Subject: [PATCH 1/2] media: dt-bindings: imx519: Add IMX519 DT bindings
From: Lee Jackson <lee.jackson@...ucam.com>
Add YAML device tree binding documentation for IMX519 CMOS
image sensor.
Signed-off-by: Umang Jain <umang.jain@...asonboard.com>
---
.../bindings/media/i2c/sony,imx519.yaml | 113 ++++++++++++++++++
1 file changed, 113 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
new file mode 100644
index 000000000000..6f38b09890d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx519.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor
+
+maintainers:
+ - Lee Jackson <lee.jackson@...ucam.com>
+
+description: |-
+ The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor
+ with an active array size of 4656H x 3496V. It is programmable through
+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
+ 4 data lanes.
+
+properties:
+ compatible:
+ const: sony,imx519
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VDIG-supply:
+ description:
+ Digital I/O voltage supply, 1.05 volts
+
+ VANA-supply:
+ description:
+ Analog voltage supply, 2.8 volts
+
+ VDDL-supply:
+ description:
+ Digital core voltage supply, 1.8 volts
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the xclr pin, if any.
+ Must be released (set high) after all supplies and INCK are applied.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either two-lane, or four-lane operation.
+ For two-lane operation the property must be set to <1 2>.
+ items:
+ - const: 1
+ - const: 2
+
+ clock-noncontinuous:
+ type: boolean
+ description: |-
+ MIPI CSI-2 clock is non-continuous if this property is present,
+ otherwise it's continuous.
+
+ link-frequencies:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies.
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - VANA-supply
+ - VDIG-supply
+ - VDDL-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx519: sensor@1a {
+ compatible = "sony,imx519";
+ reg = <0x1a>;
+ clocks = <&imx519_clk>;
+ VANA-supply = <&imx519_vana>; /* 2.8v */
+ VDIG-supply = <&imx519_vdig>; /* 1.05v */
+ VDDL-supply = <&imx519_vddl>; /* 1.8v */
+
+ port {
+ imx519_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ data-lanes = <1 2>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <408000000>;
+ };
+ };
+ };
+ };
+
+...
--
2.39.1
Powered by blists - more mailing lists