| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230727085434.16596-1-krzysztof.kozlowski@linaro.org>
Date: Thu, 27 Jul 2023 10:54:34 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Support Opensource <support.opensource@...semi.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Eric Jeong <eric.jeong.opensource@...semi.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3] regulator: dt-bindings: dlg,slg51000: Convert to DT schema
Convert the bindings for Dialog Semiconductor SLG51000 Voltage Regulator
to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes in v3:
1. Correct typo "regulatoris".
Changes in v2:
1. Mention that supplies are required, if given regulator is enabled,
which matches exactly original wording of old binding.
---
.../bindings/regulator/dlg,slg51000.yaml | 132 ++++++++++++++++++
.../bindings/regulator/slg51000.txt | 88 ------------
MAINTAINERS | 2 +-
3 files changed, 133 insertions(+), 89 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/slg51000.txt
diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
new file mode 100644
index 000000000000..bad140418e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor SLG51000 Voltage Regulator
+
+maintainers:
+ - Eric Jeong <eric.jeong.opensource@...semi.com>
+ - Support Opensource <support.opensource@...semi.com>
+
+properties:
+ compatible:
+ const: dlg,slg51000
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dlg,cs-gpios:
+ maxItems: 1
+ description:
+ GPIO for chip select
+
+ vin3-supply:
+ description:
+ Input supply for ldo3, required if regulator is enabled
+
+ vin4-supply:
+ description:
+ Input supply for ldo4, required if regulator is enabled
+
+ vin5-supply:
+ description:
+ Input supply for ldo5, required if regulator is enabled
+
+ vin6-supply:
+ description:
+ Input supply for ldo6, required if regulator is enabled
+
+ vin7-supply:
+ description:
+ Input supply for ldo7, required if regulator is enabled
+
+ regulators:
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+ required:
+ - regulator-name
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+ vin5-supply = <&vreg_s1f_1p2>;
+ vin6-supply = <&vreg_s1f_1p2>;
+
+ regulators {
+ ldo1 {
+ regulator-name = "slg51000_b_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2 {
+ regulator-name = "slg51000_b_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3 {
+ regulator-name = "slg51000_b_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ ldo4 {
+ regulator-name = "slg51000_b_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ ldo5 {
+ regulator-name = "slg51000_b_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo6 {
+ regulator-name = "slg51000_b_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7 {
+ regulator-name = "slg51000_b_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt
deleted file mode 100644
index aa0733e49b90..000000000000
--- a/Documentation/devicetree/bindings/regulator/slg51000.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Dialog Semiconductor SLG51000 Voltage Regulator
-
-Required properties:
-- compatible : Should be "dlg,slg51000" for SLG51000
-- reg : Specifies the I2C slave address.
-- xxx-supply: Input voltage supply regulator for ldo3 to ldo7.
- These entries are required if regulators are enabled for a device.
- An absence of these properties can cause the regulator registration to fail.
- If some of input supply is powered through battery or always-on supply then
- also it is required to have these parameters with proper node handle of always
- on power supply.
- vin3-supply: Input supply for ldo3
- vin4-supply: Input supply for ldo4
- vin5-supply: Input supply for ldo5
- vin6-supply: Input supply for ldo6
- vin7-supply: Input supply for ldo7
-
-Optional properties:
-- interrupt-parent : Specifies the reference to the interrupt controller.
-- interrupts : IRQ line information.
-- dlg,cs-gpios : Specify a valid GPIO for chip select
-
-Sub-nodes:
-- regulators : This node defines the settings for the regulators.
- The content of the sub-node is defined by the standard binding
- for regulators; see regulator.txt.
-
- The SLG51000 regulators are bound using their names listed below:
- ldo1
- ldo2
- ldo3
- ldo4
- ldo5
- ldo6
- ldo7
-
-Optional properties for regulators:
-- enable-gpios : Specify a valid GPIO for platform control of the regulator.
-
-Example:
- pmic: slg51000@75 {
- compatible = "dlg,slg51000";
- reg = <0x75>;
-
- regulators {
- ldo1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3750000>;
- };
-
- ldo4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3750000>;
- };
-
- ldo5 {
- regulator-name = "ldo5";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo6 {
- regulator-name = "ldo6";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo7 {
- regulator-name = "ldo7";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3750000>;
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index df54d6eee746..0efb378621eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6038,7 +6038,7 @@ F: Documentation/devicetree/bindings/mfd/da90*.txt
F: Documentation/devicetree/bindings/mfd/dlg,da90*.yaml
F: Documentation/devicetree/bindings/regulator/da92*.txt
F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml
-F: Documentation/devicetree/bindings/regulator/slg51000.txt
+F: Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
F: Documentation/devicetree/bindings/sound/da[79]*.txt
F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt
F: Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
--
2.34.1
Powered by blists - more mailing lists