| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <990b0e22-63ad-f747-4ea2-0c3ba78b0b37@redhat.com>
Date: Fri, 28 Jul 2023 16:31:06 +0200
From: Adrian Moreno <amorenoz@...hat.com>
To: Aaron Conole <aconole@...hat.com>, netdev@...r.kernel.org
Cc: dev@...nvswitch.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, Shuah Khan <shuah@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Pravin B Shelar <pshelar@....org>,
Ilya Maximets <i.maximets@....org>
Subject: Re: [PATCH v2 net-next 5/5] selftests: openvswitch: add ct-nat test
case with ipv4
On 7/28/23 13:59, Aaron Conole wrote:
> Building on the previous work, add a very simplistic NAT case
> using ipv4. This just tests dnat transformation
>
> Signed-off-by: Aaron Conole <aconole@...hat.com>
> ---
> .../selftests/net/openvswitch/openvswitch.sh | 64 ++++++++++++++++
> .../selftests/net/openvswitch/ovs-dpctl.py | 75 +++++++++++++++++++
> 2 files changed, 139 insertions(+)
>
> diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
> index 40a66c72af0f..dced4f612a78 100755
> --- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
> +++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
> @@ -14,6 +14,7 @@ tests="
> arp_ping eth-arp: Basic arp ping between two NS
> ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct
> connect_v4 ip4-xon: Basic ipv4 ping between two NS
> + nat_connect_v4 ip4-nat-xon: Basic ipv4 tcp connection via NAT
> netlink_checks ovsnl: validate netlink attrs and settings
> upcall_interfaces ovs: test the upcall interfaces"
>
> @@ -300,6 +301,69 @@ test_connect_v4 () {
> return 0
> }
>
> +# nat_connect_v4 test
> +# - client has 1500 byte MTU
> +# - server has 1500 byte MTU
> +# - use ICMP to ping in each direction
> +# - only allow CT state stuff to pass through new in c -> s
> +test_nat_connect_v4 () {
> + which nc >/dev/null 2>/dev/null || return $ksft_skip
> +
> + sbx_add "test_nat_connect_v4" || return $?
> +
> + ovs_add_dp "test_nat_connect_v4" nat4 || return 1
> + info "create namespaces"
> + for ns in client server; do
> + ovs_add_netns_and_veths "test_nat_connect_v4" "nat4" "$ns" \
> + "${ns:0:1}0" "${ns:0:1}1" || return 1
> + done
> +
> + ip netns exec client ip addr add 172.31.110.10/24 dev c1
> + ip netns exec client ip link set c1 up
> + ip netns exec server ip addr add 172.31.110.20/24 dev s1
> + ip netns exec server ip link set s1 up
> +
> + ip netns exec client ip route add default via 172.31.110.20
> +
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + "ct_state(-trk),in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.0.20)" \
> + "ct(commit,nat(dst=172.31.110.20)),recirc(0x1)"
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + "ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \
> + "ct(commit,nat),recirc(0x2)"
> +
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + "recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),eth_type(0x0800),ipv4()" "2"
> + ovs_add_flow "test_nat_connect_v4" nat4 \
> + "recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),eth_type(0x0800),ipv4()" "1"
> +
> + # do a ping
> + ovs_sbx "test_nat_connect_v4" ip netns exec client ping 192.168.0.20 -c 3 || return 1
> +
> + # create an echo server in 'server'
> + echo "server" | \
> + ovs_netns_spawn_daemon "test_nat_connect_v4" "server" \
> + nc -lvnp 4443
> + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 192.168.0.20 4443 || return 1
> +
> + # Now test in the other direction (should fail)
> + echo "client" | \
> + ovs_netns_spawn_daemon "test_nat_connect_v4" "client" \
> + nc -lvnp 4443
> + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443
> + if [ $? == 0 ]; then
> + info "connect to client was successful"
> + return 1
> + fi
> +
> + info "done..."
> + return 0
> +}
> +
> # netlink_validation
> # - Create a dp
> # - check no warning with "old version" simulation
> diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
> index 6e258ab9e635..258c9ef263d9 100644
> --- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
> +++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
> @@ -530,6 +530,81 @@ class ovsactions(nla):
> else:
> ctact["attrs"].append([scan[1], None])
> actstr = actstr[strspn(actstr, ", ") :]
> + # it seems strange to put this here, but nat() is a complex
> + # sub-action and this lets it sit anywhere in the ct() action
> + if actstr.startswith("nat"):
> + actstr = actstr[3:]
> + natact = ovsactions.ctact.natattr()
> +
> + if actstr.startswith("("):
> + t = None
> + actstr = actstr[1:]
> + if actstr.startswith("src"):
> + t = "OVS_NAT_ATTR_SRC"
> + actstr = actstr[3:]
> + elif actstr.startswith("dst"):
> + t = "OVS_NAT_ATTR_DST"
> + actstr = actstr[3:]
> +
> + actstr, ip_block_min = parse_extract_field(
> + actstr, "=", "([0-9a-fA-F:\.\[]+)", str, False
> + )
> + actstr, ip_block_max = parse_extract_field(
> + actstr, "-", "([0-9a-fA-F:\.\[]+)", str, False
> + )
> +
> + # [XXXX:YYY::Z]:123
> + # following RFC 3986
> + # More complete parsing, ala RFC5952 isn't
> + # supported.
> + if actstr.startswith("]"):
> + actstr = actstr[1:]
> + if ip_block_min is not None and \
> + ip_block_min.startswith("["):
> + ip_block_min = ip_block_min[1:]
> + if ip_block_max is not None and \
> + ip_block_max.startswith("["):
> + ip_block_max = ip_block_max[1:]
> +
> + actstr, proto_min = parse_extract_field(
> + actstr, ":", "(\d+)", int, False
> + )
> + actstr, proto_max = parse_extract_field(
> + actstr, "-", "(\d+)", int, False
> + )
I'm still struggling to make this part work:
On the one hand, ipv6 seems not fully supported by ovs-dpctl.py. If I try adding
an ipv6 flow I end up needing to add a function such as as the following and use
it to parse "ipv6()" field:
def convert_ipv6(data):
ip, _, mask = data.partition('/')
max_ip = pow(2, 128) - 1
if not ip:
ip = mask = 0
elif not mask:
mask = max
elif mask.isdigit():
mask = (max_ip << (128 - int(mask))) & max_ip
return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed
OTOH, trying to support ipv6 makes ct ip/port range parsing more complex, for
instance, this action: "ct(nat(src=10.0.0.240-10.0.0.254:32768-65535))"
fails, because it's parsed as:
ip_block_min = 10.0.0.240
ip_block_max = 10.0.0.254:32768
proto_min = None
proto_max = 65535
I would say we could drop ipv6 support for nat() action, making it simpler to
parse or first detect if we're parsing ipv4 or ipv6 and use appropriate regexp
on each case. E.g:
https://github.com/openvswitch/ovs/blob/d460c473ebf9e9ab16da44cbfbb13a4911352195/python/ovs/flow/decoders.py#L430-L486
Another approach would be to stop trying to be human friendly and use an easier
to parse syntax, something closer to key-value, e.g:
"ct(ip_block_min=10.0.0.240, ip_block_max=10.0.0.254, proto_min=32768,
proto_max=65535)". It'd be more verbose and not compatible with ovs tooling but
this is a testing tool afterall. WDYT?
> +
> + if t is not None:
> + natact["attrs"].append([t, None])
> +
> + if ip_block_min is not None:
> + natact["attrs"].append(
> + ["OVS_NAT_ATTR_IP_MIN", ip_block_min]
> + )
> + if ip_block_max is not None:
> + natact["attrs"].append(
> + ["OVS_NAT_ATTR_IP_MAX", ip_block_max]
> + )
> + if proto_min is not None:
> + natact["attrs"].append(
> + ["OVS_NAT_ATTR_PROTO_MIN", proto_min]
> + )
> + if proto_max is not None:
> + natact["attrs"].append(
> + ["OVS_NAT_ATTR_PROTO_MAX", proto_max]
> + )
> +
> + for natscan in (
> + ("persist", "OVS_NAT_ATTR_PERSISTENT"),
odp-util.c defines this flag as "persistent", not sure if you intend to keep it
compatible at all.
> + ("hash", "OVS_NAT_ATTR_PROTO_HASH"),
> + ("random", "OVS_NAT_ATTR_PROTO_RANDOM"),
> + ):
> + if actstr.startswith(natscan[0]):
> + actstr = actstr[len(natscan[0]) :]
> + natact["attrs"].append([natscan[1], None])
> + actstr = actstr[strspn(actstr, ", ") :]
> +
> + ctact["attrs"].append(["OVS_CT_ATTR_NAT", natact])
> + actstr = actstr[strspn(actstr, ",) ") :]
>
> self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact])
> parsed = True
--
Adrián Moreno
Powered by blists - more mailing lists