[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZMNojqwLxcG8FcHN@x1>
Date: Fri, 28 Jul 2023 00:04:46 -0700
From: Drew Fustini <dfustini@...libre.com>
To: Xi Ruoyao <xry111@...uxfromscratch.org>
Cc: Jisheng Zhang <jszhang@...nel.org>,
Conor Dooley <conor.dooley@...rochip.com>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v3 0/8] Add Sipeed Lichee Pi 4A RISC-V board support
On Fri, Jul 28, 2023 at 12:29:44AM +0800, Xi Ruoyao wrote:
> On Fri, 2023-07-28 at 00:11 +0800, Jisheng Zhang wrote:
> > On Thu, Jul 27, 2023 at 08:54:59AM +0800, Xi Ruoyao wrote:
> > > On Thu, 2023-07-27 at 08:14 +0800, Xi Ruoyao wrote:
> > > > On Wed, 2023-07-26 at 23:00 +0800, Jisheng Zhang wrote:
> > > > > which dts r u using? see below.
> > > > >
> > > > > >
> > > > > > Or maybe my toolchain (GCC 13.1.0, Binutils-2.40, with no
> > > > > > patches) can
> > > > > > miscompile the kernel?
> > > >
> > > > /* snip */
> > > >
> > > > > > Boot HART ID : 0
> > > > > > Boot HART Domain : root
> > > > > > Boot HART Priv Version : v1.11
> > > > > > Boot HART Base ISA : rv64imafdcvx
> > > > >
> > > > > what? I don't think the mainline dts provide v and x.
> > > >
> > > > I copied the compiled arch/riscv/boot/dts/thead/th1520-lichee-pi-
> > > > 4a.dtb
> > > > into /boot and loaded it with u-boot "load" command onto
> > > > 0x46000000, and
> > > > passed this address to the booti command.
> > > >
> > > > But maybe I've copied the wrong file or made some other mistake...
> > > > I'll
> > > > recheck.
> > >
> > > Hmm, and if I read OpenSBI code correctly, this line reflects the
> > > content of the misa CSR, not the DT riscv,isa value.
> > >
> >
> > Aha indeed the "vx" isa extensions are not from the DT riscv,isa
> > property. I will try your opensbi/linux/uboot combinations on my
> > lpi4a board tomorrow.
>
> My kernel config attached. Maybe you can find some stupid mistake in
> it, I'm not familiar with RISC-V, nor DT-based systems :(.
It seems like your kernel config is the problem. I used it and I saw
the same result of a panic in riscv_intc_irq:
https://gist.github.com/pdp7/1a26ebe20017a3b90c4e9c005f8178e1
This is the config I have been using successfully:
https://gist.github.com/pdp7/ecb34ba1e93fc6cfc4dce66d71e14f82
Could you try that config?
Linux 6.5-rc3 boots okay when built with it:
https://gist.github.com/pdp7/580b072f9a5bf9be87cf88b5f81e50e3
Thanks,
Drew
Powered by blists - more mailing lists