| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230728120931.335390967@linutronix.de>
Date: Fri, 28 Jul 2023 14:13:20 +0200 (CEST)
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org, Tom Lendacky <thomas.lendacky@....com>,
Andrew Cooper <andrew.cooper3@...rix.com>,
Arjan van de Ven <arjan@...ux.intel.com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
Dick Kennedy <dick.kennedy@...adcom.com>,
James Smart <james.smart@...adcom.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>,
linux-hwmon@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
Huang Rui <ray.huang@....com>, Juergen Gross <jgross@...e.com>,
Steve Wahl <steve.wahl@....com>,
Mike Travis <mike.travis@....com>,
Dimitri Sivanich <dimitri.sivanich@....com>,
Russ Anderson <russ.anderson@....com>
Subject: [patch v2 30/38] x86/cpu: Use common topology code for AMD
Switch it over to the new topology evaluation mechanism and remove the
random bits and pieces which are sprinkled all over the place.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
arch/x86/include/asm/processor.h | 2
arch/x86/include/asm/topology.h | 5 +
arch/x86/kernel/cpu/amd.c | 146 ----------------------------------
arch/x86/kernel/cpu/mce/inject.c | 3
arch/x86/kernel/cpu/topology_common.c | 5 -
5 files changed, 10 insertions(+), 151 deletions(-)
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -703,10 +703,8 @@ static inline u16 per_cpu_l2c_id(unsigne
}
#ifdef CONFIG_CPU_SUP_AMD
-extern u32 amd_get_nodes_per_socket(void);
extern u32 amd_get_highest_perf(void);
#else
-static inline u32 amd_get_nodes_per_socket(void) { return 0; }
static inline u32 amd_get_highest_perf(void) { return 0; }
#endif
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -121,6 +121,11 @@ struct x86_topology_system {
extern struct x86_topology_system x86_topo_system;
+static inline unsigned int topology_get_domain_size(enum x86_topology_domains dom)
+{
+ return x86_topo_system.dom_size[dom];
+}
+
extern const struct cpumask *cpu_coregroup_mask(int cpu);
extern const struct cpumask *cpu_clustergroup_mask(int cpu);
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -32,13 +32,6 @@ static const int amd_erratum_400[];
static const int amd_erratum_1054[];
static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum);
-/*
- * nodes_per_socket: Stores the number of nodes per socket.
- * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX
- * Node Identifiers[10:8]
- */
-static u32 nodes_per_socket = 1;
-
static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
{
u32 gprs[8] = { 0 };
@@ -305,97 +298,6 @@ static int nearby_node(int apicid)
}
#endif
-/*
- * Fix up topo::core_id for pre-F17h systems to be in the
- * [0 .. cores_per_node - 1] range. Not really needed but
- * kept so as not to break existing setups.
- */
-static void legacy_fixup_core_id(struct cpuinfo_x86 *c)
-{
- u32 cus_per_node;
-
- if (c->x86 >= 0x17)
- return;
-
- cus_per_node = c->x86_max_cores / nodes_per_socket;
- c->topo.core_id %= cus_per_node;
-}
-
-/*
- * Fixup core topology information for
- * (1) AMD multi-node processors
- * Assumption: Number of cores in each internal node is the same.
- * (2) AMD processors supporting compute units
- */
-static void amd_get_topology(struct cpuinfo_x86 *c)
-{
- /* get information required for multi-node processors */
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- int err;
- u32 eax, ebx, ecx, edx;
-
- cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-
- c->topo.die_id = ecx & 0xff;
-
- if (c->x86 == 0x15)
- c->topo.cu_id = ebx & 0xff;
-
- if (c->x86 >= 0x17) {
- c->topo.core_id = ebx & 0xff;
-
- if (smp_num_siblings > 1)
- c->x86_max_cores /= smp_num_siblings;
- }
-
- /*
- * In case leaf B is available, use it to derive
- * topology information.
- */
- err = detect_extended_topology(c);
- if (!err)
- c->x86_coreid_bits = get_count_order(c->x86_max_cores);
-
- cacheinfo_amd_init_llc_id(c, c->topo.die_id);
-
- } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- c->topo.die_id = value & 7;
- c->topo.llc_id = c->topo.die_id;
- } else
- return;
-
- if (nodes_per_socket > 1) {
- set_cpu_cap(c, X86_FEATURE_AMD_DCM);
- legacy_fixup_core_id(c);
- }
-}
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distinguish the cores.
- * Assumes number of cores is a power of two.
- */
-static void amd_detect_cmp(struct cpuinfo_x86 *c)
-{
- unsigned bits;
-
- bits = c->x86_coreid_bits;
- /* Low order bits define the core id (index of core in socket) */
- c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->topo.pkg_id = c->topo.initial_apicid >> bits;
- /* use socket ID also for last level cache */
- c->topo.llc_id = c->topo.die_id = c->topo.pkg_id;
-}
-
-u32 amd_get_nodes_per_socket(void)
-{
- return nodes_per_socket;
-}
-EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket);
-
static void srat_detect_node(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_NUMA
@@ -447,32 +349,6 @@ static void srat_detect_node(struct cpui
#endif
}
-static void early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-#endif
-}
-
static void bsp_init_amd(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
@@ -505,18 +381,6 @@ static void bsp_init_amd(struct cpuinfo_
if (cpu_has(c, X86_FEATURE_MWAITX))
use_mwaitx_delay();
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- u32 ecx;
-
- ecx = cpuid_ecx(0x8000001e);
- __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1;
- } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1;
- }
-
if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
!boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
c->x86 >= 0x15 && c->x86 <= 0x17) {
@@ -598,8 +462,6 @@ static void early_init_amd(struct cpuinf
u64 value;
u32 dummy;
- early_init_amd_mc(c);
-
if (c->x86 >= 0xf)
set_cpu_cap(c, X86_FEATURE_K8);
@@ -687,9 +549,6 @@ static void early_init_amd(struct cpuinf
}
}
}
-
- if (cpu_has(c, X86_FEATURE_TOPOEXT))
- smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
}
static void init_amd_k8(struct cpuinfo_x86 *c)
@@ -929,9 +788,6 @@ static void init_amd(struct cpuinfo_x86
if (cpu_has(c, X86_FEATURE_FSRM))
set_cpu_cap(c, X86_FEATURE_FSRS);
- /* get apicid instead of initial apic id from cpuid */
- c->topo.apicid = read_apic_id();
-
/* K6s reports MCEs but don't actually have all the MSRs */
if (c->x86 < 6)
clear_cpu_cap(c, X86_FEATURE_MCE);
@@ -959,8 +815,6 @@ static void init_amd(struct cpuinfo_x86
cpu_detect_cache_sizes(c);
- amd_detect_cmp(c);
- amd_get_topology(c);
srat_detect_node(c);
init_amd_cacheinfo(c);
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -433,8 +433,7 @@ static u32 get_nbc_for_node(int node_id)
struct cpuinfo_x86 *c = &boot_cpu_data;
u32 cores_per_node;
- cores_per_node = (c->x86_max_cores * smp_num_siblings) / amd_get_nodes_per_socket();
-
+ cores_per_node = (c->x86_max_cores * smp_num_siblings) / topology_amd_nodes_per_pkg();
return cores_per_node * node_id;
}
--- a/arch/x86/kernel/cpu/topology_common.c
+++ b/arch/x86/kernel/cpu/topology_common.c
@@ -65,7 +65,6 @@ bool topo_is_converted(struct cpuinfo_x8
{
/* Temporary until everything is converted over. */
switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
case X86_VENDOR_HYGON:
return false;
default:
@@ -126,6 +125,10 @@ static void parse_topology(struct topo_s
tscan->ebx1_nproc_shift = get_count_order(ebx.nproc);
switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (IS_ENABLED(CONFIG_CPU_SUP_AMD))
+ cpu_parse_topology_amd(tscan);
+ break;
case X86_VENDOR_CENTAUR:
case X86_VENDOR_ZHAOXIN:
parse_legacy(tscan);
Powered by blists - more mailing lists