lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230729133112.462023-1-savicaleksa83@gmail.com>
Date:   Sat, 29 Jul 2023 15:31:12 +0200
From:   Aleksa Savic <savicaleksa83@...il.com>
To:     linux-hwmon@...r.kernel.org
Cc:     Aleksa Savic <savicaleksa83@...il.com>,
        Jack Doan <me@...kdoan.com>, Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2] hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl report

Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE.

Reported by a user on Github [1] and tested by both of us.

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82

Signed-off-by: Aleksa Savic <savicaleksa83@...il.com>
---
Changes in v2:
- Added missing <linux/delay.h> include
---
 drivers/hwmon/aquacomputer_d5next.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index a997dbcb563f..6ec0ab58a289 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -13,6 +13,7 @@
 
 #include <linux/crc16.h>
 #include <linux/debugfs.h>
+#include <linux/delay.h>
 #include <linux/hid.h>
 #include <linux/hwmon.h>
 #include <linux/jiffies.h>
@@ -652,6 +653,31 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
 	ret = hid_hw_raw_request(priv->hdev, priv->secondary_ctrl_report_id,
 				 priv->secondary_ctrl_report, priv->secondary_ctrl_report_size,
 				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Wait 200ms before returning to make sure that the device actually processed both reports
+	 * and saved ctrl data to memory. Otherwise, an aqc_get_ctrl_data() call made shortly after
+	 * may fail with -EPIPE because the device is still busy and can't provide data. This can
+	 * happen when userspace tools, such as fancontrol or liquidctl, write to sysfs entries in
+	 * quick succession.
+	 *
+	 * 200ms was found to be the sweet spot between fixing the issue and not significantly
+	 * prolonging the call. Quadro, Octo, D5 Next and Aquaero are currently known to be
+	 * affected.
+	 */
+	switch (priv->kind) {
+	case quadro:
+	case octo:
+	case d5next:
+	case aquaero:
+		msleep(200);
+		break;
+	default:
+		break;
+	}
+
 	return ret;
 }
 
-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ