| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230730111530.98105-1-krzysztof.kozlowski@linaro.org>
Date: Sun, 30 Jul 2023 13:15:30 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] ARM: dts: qcom: use defines for interrupts
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 44 ++++++++++++------------
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 2 +-
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 22 ++++++------
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 6 ++--
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 18 +++++-----
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 26 +++++++-------
6 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index e0adf237fc5c..c693bfc63488 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -190,7 +190,7 @@ cpu_crit3: trip1 {
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
+ interrupts = <GIC_PPI 10 0x304>;
};
clocks {
@@ -244,7 +244,7 @@ apps_smsm: apps@0 {
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -252,7 +252,7 @@ modem_smsm: modem@1 {
q6_smsm: q6@2 {
reg = <2>;
- interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -260,7 +260,7 @@ q6_smsm: q6@2 {
wcnss_smsm: wcnss@3 {
reg = <3>;
- interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -268,7 +268,7 @@ wcnss_smsm: wcnss@3 {
dsps_smsm: dsps@4 {
reg = <4>;
- interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -316,7 +316,7 @@ tlmm_pinmux: pinctrl@...000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ps_hold>;
@@ -338,9 +338,9 @@ intc: interrupt-controller@...0000 {
timer@...a000 {
compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
"qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
+ interrupts = <GIC_PPI 1 0x301>,
+ <GIC_PPI 2 0x301>,
+ <GIC_PPI 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>;
cpu-offset = <0x80000>;
@@ -428,7 +428,7 @@ gsbi1_serial: serial@...50000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12450000 0x100>,
<0x12400000 0x03>;
- interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -440,7 +440,7 @@ gsbi1_i2c: i2c@...60000 {
pinctrl-1 = <&i2c1_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
- interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -469,7 +469,7 @@ gsbi2_i2c: i2c@...a0000 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-1 = <&i2c2_pins_sleep>;
pinctrl-names = "default", "sleep";
- interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -544,7 +544,7 @@ gsbi5_serial: serial@...40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x100>,
<0x1a200000 0x03>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -553,7 +553,7 @@ gsbi5_serial: serial@...40000 {
gsbi5_spi: spi@...80000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
pinctrl-names = "default", "sleep";
@@ -580,7 +580,7 @@ gsbi6_serial: serial@...40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x100>,
<0x16500000 0x03>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -616,7 +616,7 @@ gsbi7_serial: serial@...40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
- interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -677,7 +677,7 @@ ssbi@...000 {
pmicintc: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&tlmm_pinmux>;
- interrupts = <74 8>;
+ interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
@@ -710,7 +710,7 @@ pm8921_mpps: mpps@50 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pmicintc>;
- interrupts = <39 1>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
@@ -719,7 +719,7 @@ pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pmicintc>;
- interrupts = <50 1>, <51 1>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -1084,7 +1084,7 @@ sdcc3: mmc@...80000 {
sdcc3bam: dma-controller@...82000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
- interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1112,7 +1112,7 @@ sdcc4: mmc@...c0000 {
sdcc4bam: dma-controller@...c2000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC4_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1141,7 +1141,7 @@ sdcc1: mmc@...00000 {
sdcc1bam: dma-controller@...02000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
- interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 1e06f76a7369..10e9ca281a3f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -162,7 +162,7 @@ scm {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
+ interrupts = <GIC_PPI 2 0xf08>,
<1 3 0xf08>,
<1 4 0xf08>,
<1 1 0xf08>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..735b71dbe744 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -47,7 +47,7 @@ memory {
cpu-pmu {
compatible = "qcom,scorpion-mp-pmu";
- interrupts = <1 9 0x304>;
+ interrupts = <GIC_PPI 9 0x304>;
};
clocks {
@@ -105,9 +105,9 @@ intc: interrupt-controller@...0000 {
timer@...0000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
+ interrupts = <GIC_PPI 0 0x301>,
+ <GIC_PPI 1 0x301>,
+ <GIC_PPI 2 0x301>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
@@ -121,7 +121,7 @@ tlmm: pinctrl@...000 {
gpio-controller;
gpio-ranges = <&tlmm 0 0 173>;
#gpio-cells = <2>;
- interrupts = <0 16 0x4>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -299,7 +299,7 @@ gsbi12_serial: serial@...40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
- interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -308,7 +308,7 @@ gsbi12_serial: serial@...40000 {
gsbi12_i2c: i2c@...80000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19c80000 0x1000>;
- interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -342,7 +342,7 @@ ssbi@...000 {
pm8058: pmic {
compatible = "qcom,pm8058";
interrupt-parent = <&tlmm>;
- interrupts = <88 8>;
+ interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
@@ -375,7 +375,7 @@ pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -384,7 +384,7 @@ pm8058_keypad: keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
@@ -437,7 +437,7 @@ rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
allow-set-time;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 706fef53767e..d6bd42fc55e1 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -518,7 +518,7 @@ blsp1_i2c1: i2c@...23000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -546,7 +546,7 @@ blsp1_i2c3: i2c@...25000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
- interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -646,7 +646,7 @@ blsp2_i2c6: i2c@...68000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9968000 0x1000>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 55ce87b75253..20bf6560a6b9 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -740,57 +740,57 @@ timer@...20000 {
frame@...21000 {
frame-number = <0>;
- interrupts = <GIC_SPI 7 0x4>,
- <GIC_SPI 6 0x4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17821000 0x1000>,
<0x17822000 0x1000>;
};
frame@...23000 {
frame-number = <1>;
- interrupts = <GIC_SPI 8 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17823000 0x1000>;
status = "disabled";
};
frame@...24000 {
frame-number = <2>;
- interrupts = <GIC_SPI 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17824000 0x1000>;
status = "disabled";
};
frame@...25000 {
frame-number = <3>;
- interrupts = <GIC_SPI 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17825000 0x1000>;
status = "disabled";
};
frame@...26000 {
frame-number = <4>;
- interrupts = <GIC_SPI 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17826000 0x1000>;
status = "disabled";
};
frame@...27000 {
frame-number = <5>;
- interrupts = <GIC_SPI 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17827000 0x1000>;
status = "disabled";
};
frame@...28000 {
frame-number = <6>;
- interrupts = <GIC_SPI 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17828000 0x1000>;
status = "disabled";
};
frame@...29000 {
frame-number = <7>;
- interrupts = <GIC_SPI 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17829000 0x1000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 1a3583029a64..8fff67d7a5e9 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -665,57 +665,57 @@ timer@...20000 {
frame@...21000 {
frame-number = <0>;
- interrupts = <GIC_SPI 7 0x4>,
- <GIC_SPI 6 0x4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17821000 0x1000>,
<0x17822000 0x1000>;
};
frame@...23000 {
frame-number = <1>;
- interrupts = <GIC_SPI 8 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17823000 0x1000>;
status = "disabled";
};
frame@...24000 {
frame-number = <2>;
- interrupts = <GIC_SPI 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17824000 0x1000>;
status = "disabled";
};
frame@...25000 {
frame-number = <3>;
- interrupts = <GIC_SPI 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17825000 0x1000>;
status = "disabled";
};
frame@...26000 {
frame-number = <4>;
- interrupts = <GIC_SPI 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17826000 0x1000>;
status = "disabled";
};
frame@...27000 {
frame-number = <5>;
- interrupts = <GIC_SPI 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17827000 0x1000>;
status = "disabled";
};
frame@...28000 {
frame-number = <6>;
- interrupts = <GIC_SPI 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17828000 0x1000>;
status = "disabled";
};
frame@...29000 {
frame-number = <7>;
- interrupts = <GIC_SPI 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17829000 0x1000>;
status = "disabled";
};
@@ -802,10 +802,10 @@ apps_bcm_voter: bcm-voter {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 12 0xf08>,
- <1 10 0xf08>,
- <1 11 0xf08>;
+ interrupts = <GIC_PPI 13 0xf08>,
+ <GIC_PPI 12 0xf08>,
+ <GIC_PPI 10 0xf08>,
+ <GIC_PPI 11 0xf08>;
clock-frequency = <19200000>;
};
};
--
2.34.1
Powered by blists - more mailing lists