[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5694691.DvuYhMxLoT@jernej-laptop>
Date: Mon, 31 Jul 2023 00:03:59 +0200
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: linux-sunxi@...ts.linux.dev, John Watts <contact@...kia.org>
Cc: Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Samuel Holland <samuel@...lland.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
Dne nedelja, 23. julij 2023 ob 11:18:33 CEST je John Watts napisal(a):
> On Sat, Jul 22, 2023 at 08:15:51AM +1000, John Watts wrote:
> > ...
> > + /omit-if-no-ref/
> > + can0_pins: can0-pins {
> > + pins = "PB2", "PB3";
> > + function = "can0";
> > + };
> > ...
> > + can0: can@...4000 {
> > + compatible = "allwinner,sun20i-d1-can";
> > + reg = <0x02504000 0x400>;
> > + interrupts = <SOC_PERIPHERAL_IRQ(21)
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CAN0>;
> > + resets = <&ccu RST_BUS_CAN0>;
> > + status = "disabled";
> > + };
>
> Just a quick late night question to people with more knowledge than me:
>
> These chips only have one pinctrl configuration for can0 and can1. Should
> the can nodes have this pre-set instead of the board dts doing this?
Yes, that's usually how it's done.
>
> I see this happening in sun4i-a10.dtsi for instance, but it also seems like
> it could become a problem when it comes to re-using the dtsi for newer chip
> variants.
Properties can be either rewritten or deleted further down, so don't worry
about that.
Best regards,
Jernej
>
> John.
Powered by blists - more mailing lists