linux-kernel - [PATCH v3 5/6] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230731163357.49045-6-manivannan.sadhasivam@linaro.org>
Date:   Mon, 31 Jul 2023 22:03:56 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     vireshk@...nel.org, nm@...com, sboyd@...nel.org,
        myungjoo.ham@...sung.com, kyungmin.park@...sung.com,
        cw00.choi@...sung.com, andersson@...nel.org,
        konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        jejb@...ux.ibm.com, martin.petersen@...cle.com
Cc:     alim.akhtar@...sung.com, avri.altman@....com, bvanassche@....org,
        linux-scsi@...r.kernel.org, linux-pm@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        quic_asutoshd@...cinc.com, quic_cang@...cinc.com,
        quic_nitirawa@...cinc.com, quic_narepall@...cinc.com,
        quic_bhaskarv@...cinc.com, quic_richardp@...cinc.com,
        quic_nguyenb@...cinc.com, quic_ziqichen@...cinc.com,
        bmasney@...hat.com, krzysztof.kozlowski@...aro.org,
        linux-kernel@...r.kernel.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v3 5/6] arm64: dts: qcom: sdm845: Add OPP table support to UFSHC

From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 42 +++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 055ca80c0075..2ea6eb44953e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2605,22 +2605,44 @@ ufs_mem_hc: ufshc@...4000 {
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@...7000 {
-- 
2.25.1