[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b938ba84-38e9-b220-9686-6656e4452c10@linaro.org>
Date: Mon, 31 Jul 2023 09:06:10 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Hal Feng <hal.feng@...rfivetech.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Walker Chen <walker.chen@...rfivetech.com>,
Xingyu Wu <xingyu.wu@...rfivetech.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>
Cc: alsa-devel@...a-project.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] ASoC: starfive: Add JH7110 PWM-DAC driver
On 31/07/2023 05:28, Hal Feng wrote:
> Add PWM-DAC driver support for the StarFive JH7110 SoC.
>
...
> +static int jh7110_pwmdac_probe(struct platform_device *pdev)
> +{
> + struct jh7110_pwmdac_dev *dev;
> + struct resource *res;
> + int ret;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->mapbase = res->start;
> +
> + dev->clks[0].id = "apb";
> + dev->clks[1].id = "core";
> +
> + ret = devm_clk_bulk_get(&pdev->dev, ARRAY_SIZE(dev->clks), dev->clks);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get pwmdac clocks\n");
return dev_err_probe
> + return ret;
> + }
> +
> + dev->rst_apb = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> + if (IS_ERR(dev->rst_apb)) {
> + dev_err(&pdev->dev, "failed to get pwmdac apb reset\n");
> + return PTR_ERR(dev->rst_apb);
return dev_err_probe
> + }
> +
> + dev->dev = &pdev->dev;
> + dev->shift = PWMDAC_SHIFT_8;
> + dev->duty_cycle = PWMDAC_CYCLE_CENTER;
> + dev->cnt_n = PWMDAC_SAMPLE_CNT_1;
> + dev->data_change = NO_CHANGE;
> + dev->data_mode = INVERTER_DATA_MSB;
> + dev->data_shift = PWMDAC_DATA_LEFT_SHIFT_BIT_0;
> +
> + dev_set_drvdata(&pdev->dev, dev);
> + ret = devm_snd_soc_register_component(&pdev->dev,
> + &jh7110_pwmdac_component,
> + &jh7110_pwmdac_dai, 1);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register dai\n");
> + return ret;
I guess here as well for consistency and shorter code even though
EPROBE_DEFER does not happen really.
return dev_err_probe
> + }
> +
> + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register pcm\n");
> + return ret;
return dev_err_probe
> + }
> +
Best regards,
Krzysztof
Powered by blists - more mailing lists