lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230731091059.17323-2-zhuyinbo@loongson.cn>
Date:   Mon, 31 Jul 2023 17:10:58 +0800
From:   Yinbo Zhu <zhuyinbo@...ngson.cn>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
        Liu Peibao <liupeibao@...ngson.cn>,
        loongson-kernel@...ts.loongnix.cn, Yinbo Zhu <zhuyinbo@...ngson.cn>
Subject: [PATCH v2 1/2] gpio: dt-bindings: add parsing of loongson gpio offset

Add parsing GPIO configure, input, output, interrupt register offset
address and GPIO control mode support.

Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
---
 .../bindings/gpio/loongson,ls-gpio.yaml       | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
index fb86e8ce6349..cad67f8bfe6e 100644
--- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
@@ -29,6 +29,33 @@ properties:
 
   gpio-ranges: true
 
+  loongson,gpio-conf-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this GPIO configuration register offset address.
+
+  loongson,gpio-out-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this GPIO output register offset address.
+
+  loongson,gpio-in-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this GPIO input register offset address.
+
+  loongson,gpio-ctrl-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this GPIO control mode, where '0' represents
+      bit control mode and '1' represents byte control mode.
+
+  loongson,gpio-inten-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This option indicate this GPIO interrupt enable register offset
+      address.
+
   interrupts:
     minItems: 1
     maxItems: 64
@@ -39,6 +66,11 @@ required:
   - ngpios
   - "#gpio-cells"
   - gpio-controller
+  - loongson,gpio-conf-offset
+  - loongson,gpio-in-offset
+  - loongson,gpio-out-offset
+  - loongson,gpio-ctrl-mode
+  - loongson,gpio-inten-offset
   - gpio-ranges
   - interrupts
 
@@ -54,6 +86,11 @@ examples:
       ngpios = <64>;
       #gpio-cells = <2>;
       gpio-controller;
+      loongson,gpio-conf-offset = <0>;
+      loongson,gpio-in-offset = <0x20>;
+      loongson,gpio-out-offset = <0x10>;
+      loongson,gpio-ctrl-mode = <0>;
+      loongson,gpio-inten-offset = <0x30>;
       gpio-ranges = <&pctrl 0 0 15>,
                     <&pctrl 16 16 15>,
                     <&pctrl 32 32 10>,
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ