| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3ee23682965144a2a0bcee19e6093f205c62019c.camel@mediatek.com>
Date: Mon, 31 Jul 2023 10:08:08 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: "p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
Shawn Sung (宋孝謙)
<Shawn.Sung@...iatek.com>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>,
"chunkuang.hu@...nel.org" <chunkuang.hu@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
Singo Chang (張興國)
<Singo.Chang@...iatek.com>,
Jason-JH Lin (林睿祥)
<Jason-JH.Lin@...iatek.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Nancy Lin (林欣螢) <Nancy.Lin@...iatek.com>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5 14/14] drm/mediatek: Support MT8188 Padding in display
driver
Hi, Hsiao-chien:
On Tue, 2023-06-27 at 14:39 +0800, Hsiao Chien Sung wrote:
> Padding is a new display module on MT8188, it provides ability
> to add pixels to width and height of a layer with specified colors.
>
> Due to hardware design, Mixer in VDOSYS1 requires width of a layer
> to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
> we need Padding to deal with odd width.
>
> Please notice that even if the Padding is in bypass mode,
> settings in register must be cleared to 0,
> or undefined behaviors could happen.
Separate this patch to two patches. One for padding driver and another
one for ovl adapator.
>
> Signed-off-by: Hsiao Chien Sung <shawn.sung@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/Makefile | 3 +-
> drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 +
> .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 33 +++++
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 2 +-
> drivers/gpu/drm/mediatek/mtk_padding.c | 136
> ++++++++++++++++++
> 6 files changed, 176 insertions(+), 2 deletions(-)
> create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c
>
> diff --git a/drivers/gpu/drm/mediatek/Makefile
> b/drivers/gpu/drm/mediatek/Makefile
> index d4d193f60271..5e4436403b8d 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -16,7 +16,8 @@ mediatek-drm-y := mtk_disp_aal.o \
> mtk_dsi.o \
> mtk_dpi.o \
> mtk_ethdr.o \
> - mtk_mdp_rdma.o
> + mtk_mdp_rdma.o \
> + mtk_padding.o
>
> obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 2254038519e1..f9fdb1268aa5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -157,4 +157,7 @@ void mtk_mdp_rdma_config(struct device *dev,
> struct mtk_mdp_rdma_cfg *cfg,
> const u32 *mtk_mdp_rdma_get_formats(struct device *dev);
> size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
>
> +int mtk_padding_clk_enable(struct device *dev);
> +void mtk_padding_clk_disable(struct device *dev);
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
> #endif
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index f73a558dcf93..ca8f3febbf11 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -29,6 +29,7 @@ enum mtk_ovl_adaptor_comp_type {
> OVL_ADAPTOR_TYPE_ETHDR,
> OVL_ADAPTOR_TYPE_MDP_RDMA,
> OVL_ADAPTOR_TYPE_MERGE,
> + OVL_ADAPTOR_TYPE_PADDING,
> OVL_ADAPTOR_TYPE_NUM,
> };
>
> @@ -46,6 +47,14 @@ enum mtk_ovl_adaptor_comp_id {
> OVL_ADAPTOR_MERGE1,
> OVL_ADAPTOR_MERGE2,
> OVL_ADAPTOR_MERGE3,
> + OVL_ADAPTOR_PADDING0,
> + OVL_ADAPTOR_PADDING1,
> + OVL_ADAPTOR_PADDING2,
> + OVL_ADAPTOR_PADDING3,
> + OVL_ADAPTOR_PADDING4,
> + OVL_ADAPTOR_PADDING5,
> + OVL_ADAPTOR_PADDING6,
> + OVL_ADAPTOR_PADDING7,
> OVL_ADAPTOR_ID_MAX
> };
>
> @@ -66,6 +75,7 @@ static const char * const
> private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
> [OVL_ADAPTOR_TYPE_ETHDR] = "ethdr",
> [OVL_ADAPTOR_TYPE_MDP_RDMA] = "vdo1-rdma",
> [OVL_ADAPTOR_TYPE_MERGE] = "merge",
> + [OVL_ADAPTOR_TYPE_PADDING] = "padding",
> };
>
> static const struct mtk_ddp_comp_funcs _ethdr = {
> @@ -78,6 +88,11 @@ static const struct mtk_ddp_comp_funcs _merge = {
> .clk_disable = mtk_merge_clk_disable,
> };
>
> +static const struct mtk_ddp_comp_funcs _padding = {
> + .clk_enable = mtk_padding_clk_enable,
> + .clk_disable = mtk_padding_clk_disable,
> +};
> +
> static const struct mtk_ddp_comp_funcs _rdma = {
> .clk_enable = mtk_mdp_rdma_clk_enable,
> .clk_disable = mtk_mdp_rdma_clk_disable,
> @@ -97,6 +112,14 @@ static const struct ovl_adaptor_comp_match
> comp_matches[OVL_ADAPTOR_ID_MAX] = {
> [OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE2, 2, &_merge },
> [OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE3, 3, &_merge },
> [OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE4, 4, &_merge },
> + [OVL_ADAPTOR_PADDING0] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING0, 0, &_padding },
> + [OVL_ADAPTOR_PADDING1] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING1, 1, &_padding },
> + [OVL_ADAPTOR_PADDING2] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING2, 2, &_padding },
> + [OVL_ADAPTOR_PADDING3] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING3, 3, &_padding },
> + [OVL_ADAPTOR_PADDING4] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING4, 4, &_padding },
> + [OVL_ADAPTOR_PADDING5] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING5, 5, &_padding },
> + [OVL_ADAPTOR_PADDING6] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING6, 6, &_padding },
> + [OVL_ADAPTOR_PADDING7] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING7, 7, &_padding },
> };
>
> void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> idx,
> @@ -108,6 +131,8 @@ void mtk_ovl_adaptor_layer_config(struct device
> *dev, unsigned int idx,
> struct mtk_mdp_rdma_cfg rdma_config = {0};
> struct device *ethdr;
> struct device *merge;
> + struct device *padding_l;
> + struct device *padding_r;
> struct device *rdma_l;
> struct device *rdma_r;
> const struct drm_format_info *fmt_info =
> drm_format_info(pending->format);
> @@ -124,6 +149,8 @@ void mtk_ovl_adaptor_layer_config(struct device
> *dev, unsigned int idx,
>
> ethdr = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0];
> merge = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 +
> idx];
> + padding_l = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_PADDING0
> + 2 * idx];
> + padding_r = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_PADDING0
> + 2 * idx + 1];
> rdma_l = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 +
> 2 * idx];
> rdma_r = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 +
> 2 * idx + 1];
>
> @@ -159,10 +186,15 @@ void mtk_ovl_adaptor_layer_config(struct device
> *dev, unsigned int idx,
> rdma_config.color_encoding = pending->color_encoding;
> mtk_mdp_rdma_config(rdma_l, &rdma_config, cmdq_pkt);
>
> + if (padding_l)
> + mtk_padding_config(padding_l, cmdq_pkt);
> +
> if (use_dual_pipe) {
> rdma_config.x_left = l_w;
> rdma_config.width = r_w;
> mtk_mdp_rdma_config(rdma_r, &rdma_config, cmdq_pkt);
> + if (padding_r)
> + mtk_padding_config(padding_r, cmdq_pkt);
> }
>
> mtk_merge_start_cmdq(merge, cmdq_pkt);
> @@ -353,6 +385,7 @@ static int ovl_adaptor_comp_get_id(struct device
> *dev, struct device_node *node,
> }
>
> static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
> + { .compatible = "mediatek,mt8188-padding", .data = (void
> *)OVL_ADAPTOR_TYPE_PADDING },
> { .compatible = "mediatek,mt8195-disp-ethdr", .data = (void
> *)OVL_ADAPTOR_TYPE_ETHDR },
> { .compatible = "mediatek,mt8195-disp-merge", .data = (void
> *)OVL_ADAPTOR_TYPE_MERGE },
> { .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void
> *)OVL_ADAPTOR_TYPE_MDP_RDMA },
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 613093068bb4..ed5b5b8d6c2e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -977,6 +977,7 @@ static struct platform_driver * const
> mtk_drm_drivers[] = {
> &mtk_dsi_driver,
> &mtk_ethdr_driver,
> &mtk_mdp_rdma_driver,
> + &mtk_padding_driver,
> };
>
> static int __init mtk_drm_init(void)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index eb2fd45941f0..562f2db47add 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -64,5 +64,5 @@ extern struct platform_driver mtk_dpi_driver;
> extern struct platform_driver mtk_dsi_driver;
> extern struct platform_driver mtk_ethdr_driver;
> extern struct platform_driver mtk_mdp_rdma_driver;
> -
Why remove this blanking line?
> +extern struct platform_driver mtk_padding_driver;
> #endif /* MTK_DRM_DRV_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_padding.c
> b/drivers/gpu/drm/mediatek/mtk_padding.c
> new file mode 100644
> index 000000000000..bbb9c5e286ce
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_padding.c
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 MediaTek Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
> +#include "mtk_disp_drv.h"
> +#include "mtk_drm_crtc.h"
> +#include "mtk_drm_ddp_comp.h"
> +
> +/**
> + * struct mtk_padding - basic information of Padding
> + * @clk: Clock of the module
> + * @regs: Virtual address of the Padding for CPU to access
hardware control register.
> + * @cmdq_reg: CMDQ setting of the Padding
CMDQ client register setting.
> + *
> + * Every Padding should have different clock source, register base,
> and
> + * CMDQ settings, we stored these differences all together.
This comment is redundant.
Regards,
CK
> + */
> +struct mtk_padding {
> + struct clk *clk;
> + void __iomem *regs;
> + struct cmdq_client_reg cmdq_reg;
> +};
> +
> +int mtk_padding_clk_enable(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + return clk_prepare_enable(padding->clk);
> +}
> +
> +void mtk_padding_clk_disable(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(padding->clk);
> +}
> +
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + /* bypass padding */
> + mtk_ddp_write_mask(cmdq_pkt, GENMASK(1, 0), &padding->cmdq_reg,
> padding->regs, 0,
> + GENMASK(1, 0));
> +}
> +
> +static int mtk_padding_bind(struct device *dev, struct device
> *master, void *data)
> +{
> + return 0;
> +}
> +
> +static void mtk_padding_unbind(struct device *dev, struct device
> *master, void *data)
> +{
> +}
> +
> +static const struct component_ops mtk_padding_component_ops = {
> + .bind = mtk_padding_bind,
> + .unbind = mtk_padding_unbind,
> +};
> +
> +static int mtk_padding_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_padding *priv;
> + struct resource *res;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev, "failed to get clk\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + priv->regs = devm_platform_get_and_ioremap_resource(pdev, 0,
> &res);
> + if (IS_ERR(priv->regs)) {
> + dev_err(dev, "failed to do ioremap\n");
> + return PTR_ERR(priv->regs);
> + }
> +
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> + ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
> + if (ret) {
> + dev_err(dev, "failed to get gce client reg\n");
> + return ret;
> + }
> +#endif
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
> +
> + ret = component_add(dev, &mtk_padding_component_ops);
> + if (ret) {
> + pm_runtime_disable(dev);
> + return dev_err_probe(dev, ret, "failed to add
> component\n");
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_padding_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &mtk_padding_component_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_padding_driver_dt_match[] = {
> + { .compatible = "mediatek,mt8188-padding" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_padding_driver_dt_match);
> +
> +struct platform_driver mtk_padding_driver = {
> + .probe = mtk_padding_probe,
> + .remove = mtk_padding_remove,
> + .driver = {
> + .name = "mediatek-padding",
> + .owner = THIS_MODULE,
> + .of_match_table = mtk_padding_driver_dt_match,
> + },
> +};
Powered by blists - more mailing lists