[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230731110239.107086-2-clamor95@gmail.com>
Date: Mon, 31 Jul 2023 14:02:38 +0300
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Svyatoslav Ryhel <clamor95@...il.com>,
Samu Onkalo <samu.p.onkalo@...ia.com>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 1/2] dt-bindings: iio: light: add apds990x binding
Add dt-binding for apds990x ambient light/proximity sensor.
Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
---
.../bindings/iio/light/avago,apds990x.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/avago,apds990x.yaml
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds990x.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds990x.yaml
new file mode 100644
index 000000000000..89a061643de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds990x.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/avago,apds990x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Avago APDS990x ambient light and proximity sensor
+
+maintainers:
+ - Samu Onkalo <samu.p.onkalo@...ia.com>
+
+description:
+ APDS990x is a combined ambient light and proximity sensor. ALS and
+ proximity functionality are highly connected. ALS measurement path
+ must be running while the proximity functionality is enabled.
+ Datasheet at https://docs.broadcom.com/doc/AV02-2867EN
+
+properties:
+ compatible:
+ const: avago,apds990x
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+ vled-supply: true
+
+ avago,pdrive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ description:
+ The LED drive current is controlled by a regulated current
+ sink on the LDR pin. This feature eliminates the need to use
+ a current limiting resistor to control LED current. The LED
+ drive current can be configured for 12.5 mA (pdrive = 3),
+ 25 mA (2), 50 mA (1) or 100 mA (0). For higher LED drive
+ requirements, an external P type transistor can be used to
+ control the LED current.
+
+ avago,ppcount:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 255
+ description:
+ The number of LED pulses can be programmed to a value of 1 to
+ 255 pulses as needed. Increasing the number of LED pulses at a
+ given current will increase the sensor sensitivity. Sensitivity
+ grows by the square root of the number of pulses. Each pulse
+ has a 16 mS period.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+ - vled-supply
+ - avago,pdrive
+ - avago,ppcount
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@39 {
+ compatible = "avago,apds990x";
+ reg = <0x39>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <82 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_3v0_proxi>;
+ vled-supply = <&vdd_1v8_sen>;
+
+ avago,pdrive = <0>;
+ avago,ppcount = <3>;
+ };
+ };
+...
--
2.39.2
Powered by blists - more mailing lists