| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230801103816.692336580@linutronix.de>
Date: Tue, 1 Aug 2023 12:47:15 +0200 (CEST)
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org, Andrew Cooper <andrew.cooper3@...rix.com>,
Tom Lendacky <thomas.lendacky@....com>,
Paolo Bonzini <pbonzini@...hat.com>,
Wei Liu <wei.liu@...nel.org>,
Arjan van de Ven <arjan@...ux.intel.com>,
Juergen Gross <jgross@...e.com>,
Michael Kelley <mikelley@...rosoft.com>,
Peter Keresztes Schmidt <peter@...esztesschmidt.de>,
"Peter Zijlstra (Intel)" <peterz@...radead.org>
Subject: [patch V3 28/60] x86/apic: Nuke empty init_apic_ldr() callbacks
apic::init_apic_ldr() is only invoked when the APIC is initialized. So
there is really no point in having:
- Default empty callbacks all over the place
- Two implementations of the actual LDR init function where one is
just unreadable gunk but does exactly the same as the other.
Make the apic::init_apic_ldr() invocation conditional, remove the empty
callbacks and consolidate the two implementation into one.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@...radead.org>
---
arch/x86/include/asm/apic.h | 2 --
arch/x86/kernel/apic/apic.c | 7 +++++--
arch/x86/kernel/apic/apic_common.c | 16 ++++++++++++++++
arch/x86/kernel/apic/apic_flat_64.c | 32 +-------------------------------
arch/x86/kernel/apic/apic_noop.c | 2 --
arch/x86/kernel/apic/apic_numachip.c | 2 --
arch/x86/kernel/apic/bigsmp_32.c | 9 ---------
arch/x86/kernel/apic/local.h | 5 ++---
arch/x86/kernel/apic/probe_32.c | 15 ---------------
arch/x86/kernel/apic/x2apic_phys.c | 5 -----
arch/x86/kernel/apic/x2apic_uv_x.c | 5 -----
arch/x86/xen/apic.c | 1 -
12 files changed, 24 insertions(+), 77 deletions(-)
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -445,8 +445,6 @@ extern void generic_bigsmp_probe(void);
#include <asm/smp.h>
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-
extern struct apic apic_noop;
static inline unsigned int read_apic_id(void)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1578,9 +1578,12 @@ static void setup_local_APIC(void)
/*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
+ * document number 292116).
+ *
+ * Except for APICs which operate in physical destination mode.
*/
- apic->init_apic_ldr();
+ if (apic->init_apic_ldr)
+ apic->init_apic_ldr();
/*
* Set Task Priority to 'accept all except vectors 0-31'. An APIC
--- a/arch/x86/kernel/apic/apic_common.c
+++ b/arch/x86/kernel/apic/apic_common.c
@@ -6,6 +6,8 @@
#include <linux/irq.h>
#include <asm/apic.h>
+#include "local.h"
+
u32 apic_default_calc_apicid(unsigned int cpu)
{
return per_cpu(x86_cpu_to_apicid, cpu);
@@ -39,3 +41,17 @@ int default_apic_id_valid(u32 apicid)
{
return (apicid < 255);
}
+
+/*
+ * Set up the logical destination ID when the APIC operates in logical
+ * destination mode.
+ */
+void default_init_apic_ldr(void)
+{
+ unsigned long val;
+
+ apic_write(APIC_DFR, APIC_DFR_FLAT);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+ apic_write(APIC_LDR, val);
+}
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -28,26 +28,6 @@ static int flat_acpi_madt_oem_check(char
return 1;
}
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-void flat_init_apic_ldr(void)
-{
- unsigned long val;
- unsigned long num, id;
-
- num = smp_processor_id();
- id = 1UL << num;
- apic_write(APIC_DFR, APIC_DFR_FLAT);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(id);
- apic_write(APIC_LDR, val);
-}
-
static void _flat_send_IPI_mask(unsigned long mask, int vector)
{
unsigned long flags;
@@ -119,7 +99,7 @@ static struct apic apic_flat __ro_after_
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
+ .init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
@@ -175,15 +155,6 @@ static int physflat_acpi_madt_oem_check(
return 0;
}
-static void physflat_init_apic_ldr(void)
-{
- /*
- * LDR and DFR are not involved in physflat mode, rather:
- * "In physical destination mode, the destination processor is
- * specified by its local APIC ID [...]." (Intel SDM, 10.6.2.1)
- */
-}
-
static int physflat_probe(void)
{
if (apic == &apic_physflat || num_possible_cpus() > 8 ||
@@ -207,7 +178,6 @@ static struct apic apic_physflat __ro_af
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = physflat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -14,7 +14,6 @@
#include <asm/apic.h>
-static void noop_init_apic_ldr(void) { }
static void noop_send_IPI(int cpu, int vector) { }
static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
@@ -94,7 +93,6 @@ struct apic apic_noop __ro_after_init =
.disable_esr = 0,
.check_apicid_used = default_check_apicid_used,
- .init_apic_ldr = noop_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -252,7 +252,6 @@ static const struct apic apic_numachip1
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
@@ -297,7 +296,6 @@ static const struct apic apic_numachip2
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -28,14 +28,6 @@ static bool bigsmp_check_apicid_used(phy
return false;
}
-/*
- * bigsmp enables physical destination mode
- * and doesn't use LDR and DFR
- */
-static void bigsmp_init_apic_ldr(void)
-{
-}
-
static void bigsmp_setup_apic_routing(void)
{
printk(KERN_INFO
@@ -108,7 +100,6 @@ static struct apic apic_bigsmp __ro_afte
.disable_esr = 1,
.check_apicid_used = bigsmp_check_apicid_used,
- .init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
.setup_apic_routing = bigsmp_setup_apic_routing,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/local.h
+++ b/arch/x86/kernel/apic/local.h
@@ -13,9 +13,6 @@
#include <asm/irq_vectors.h>
#include <asm/apic.h>
-/* APIC flat 64 */
-void flat_init_apic_ldr(void);
-
/* X2APIC */
int x2apic_apic_id_valid(u32 apicid);
int x2apic_apic_id_registered(void);
@@ -46,6 +43,8 @@ static inline unsigned int __prepare_ICR
return icr;
}
+void default_init_apic_ldr(void);
+
void __default_send_IPI_shortcut(unsigned int shortcut, int vector);
/*
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -32,21 +32,6 @@ static int default_apic_id_registered(vo
return physid_isset(read_apic_id(), phys_cpu_present_map);
}
-/*
- * Set up the logical destination ID. Intel recommends to set DFR, LDR and
- * TPR before enabling an APIC. See e.g. "AP-388 82489DX User's Manual"
- * (Intel document number 292116).
- */
-static void default_init_apic_ldr(void)
-{
- unsigned long val;
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
- apic_write(APIC_LDR, val);
-}
-
static int default_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -91,10 +91,6 @@ static void x2apic_send_IPI_all(int vect
__x2apic_send_IPI_shorthand(vector, APIC_DEST_ALLINC);
}
-static void init_x2apic_ldr(void)
-{
-}
-
static int x2apic_phys_probe(void)
{
if (!x2apic_mode)
@@ -169,7 +165,6 @@ static struct apic apic_x2apic_phys __ro
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -788,10 +788,6 @@ static int uv_apic_id_registered(void)
return 1;
}
-static void uv_init_apic_ldr(void)
-{
-}
-
static u32 apic_uv_calc_apicid(unsigned int cpu)
{
return apic_default_calc_apicid(cpu);
@@ -841,7 +837,6 @@ static struct apic apic_x2apic_uv_x __ro
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = uv_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -149,7 +149,6 @@ static struct apic xen_pv_apic = {
.disable_esr = 0,
.check_apicid_used = default_check_apicid_used, /* Used on 32-bit */
- .init_apic_ldr = xen_noop, /* setup_local_APIC calls it */
.ioapic_phys_id_map = default_ioapic_phys_id_map, /* Used on 32-bit */
.setup_apic_routing = NULL,
.cpu_present_to_apicid = xen_cpu_present_to_apicid,
Powered by blists - more mailing lists