| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230801140144.85548-1-jim_monkey@163.com>
Date: Tue, 1 Aug 2023 22:01:44 +0800
From: "Baojun.Xu" <jim_monkey@....com>
To: lgirdwood@...il.com, broonie@...nel.org, perex@...ex.cz,
tiwai@...e.com
Cc: shenghao-ding@...com, kevin-lu@...com,
krzysztof.kozlowski@...aro.org, rf@...nsource.cirrus.com,
shumingf@...ltek.com, herve.codina@...tlin.com,
povik+lin@...ebit.org, ryans.lee@...log.com,
ckeepax@...nsource.cirrus.com, sebastian.reichel@...labora.com,
fido_max@...ox.ru, wangweidong.a@...nic.com,
linux-kernel@...r.kernel.org, alsa-devel@...a-project.org,
peeyush@...com, navada@...com, tiwai@...e.de,
mengdong.lin@...el.com, Baojun Xu <baojun.xu@...com>
Subject: [PATCH v1 1/2] ASoC: tas2783: Add source files for tas2783 soundwire driver
From: Baojun Xu <baojun.xu@...com>
Add source file and header file for tas2783 driver.
Update Kconfig and Makefile for tas2783 driver.
Signed-off-by: Baojun Xu <baojun.xu@...com>
---
Change in v1:
- Add tas2783-sdw.c
- Add tas2783.h
- Update Makefile for tas2783 driver.
- Update Kconfig for tas2783 driver.
---
sound/soc/codecs/Kconfig | 12 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/tas2783-sdw.c | 1166 ++++++++++++++++++++++++++++++++
sound/soc/codecs/tas2783.h | 178 +++++
4 files changed, 1358 insertions(+)
create mode 100644 sound/soc/codecs/tas2783-sdw.c
create mode 100644 sound/soc/codecs/tas2783.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c2de4ee72183..318ad867030c 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -240,6 +240,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_TAS2781_COMLIB
imply SND_SOC_TAS2781_FMWLIB
imply SND_SOC_TAS2781_I2C
+ imply SND_SOC_TAS2783
imply SND_SOC_TAS5086
imply SND_SOC_TAS571X
imply SND_SOC_TAS5720
@@ -1762,6 +1763,17 @@ config SND_SOC_TAS5086
tristate "Texas Instruments TAS5086 speaker amplifier"
depends on I2C
+config SND_SOC_TAS2783
+ tristate "Texas Instruments TAS2781 speaker amplifier (sdw)"
+ depends on SOUNDWIRE
+ select REGMAP
+ select CRC8
+ help
+ Enable support for Texas Instruments TAS2783 Smart Amplifier
+ Digital input mono Class-D and DSP-inside audio power amplifiers.
+ Note the TAS2783 driver implements a flexible and configurable
+ algo coff setting, for one, two, even multiple TAS2783 chips.
+
config SND_SOC_TAS571X
tristate "Texas Instruments TAS571x power amplifiers"
depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index b48a9a323b84..3298dfa3b9d5 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -276,6 +276,7 @@ snd-soc-tas2770-objs := tas2770.o
snd-soc-tas2781-comlib-objs := tas2781-comlib.o
snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o
snd-soc-tas2781-i2c-objs := tas2781-i2c.o
+snd-soc-tas2783-objs := tas2783-sdw.o
snd-soc-tfa9879-objs := tfa9879.o
snd-soc-tfa989x-objs := tfa989x.o
snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o
@@ -648,6 +649,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o
obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o
obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o
obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o
+obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o
obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o
obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o
obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o
diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c
new file mode 100644
index 000000000000..93b1e7a1f311
--- /dev/null
+++ b/sound/soc/codecs/tas2783-sdw.c
@@ -0,0 +1,1165 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
+//
+// Copyright (C) 2023 Texas Instruments Incorporated
+// https://www.ti.com
+//
+// The TAS2783 driver implements a flexible and configurable
+// algo coefficient setting for single TAS2783 chips.
+//
+// Author: Baojun Xu <baojun.xu@...com>
+// Author: Kevin Lu <kevin-lu@...com>
+//
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/crc8.h>
+#include <linux/crc32.h>
+#include <linux/efi.h>
+#include <linux/firmware.h>
+#include <linux/of_gpio.h>
+#include <linux/interrupt.h>
+#include <sound/soc.h>
+#include <sound/sdw.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/tas2781-tlv.h>
+
+#include "tas2783.h"
+
+static const unsigned int tas2783_calibration_reg[] = {
+ TAS2783_CALIBRATION_RE,
+ TAS2783_CALIBRATION_RE_LOW,
+ TAS2783_CALIBRATION_INV_RE,
+ TAS2783_CALIBRATION_POW,
+ TAS2783_CALIBRATION_TLIMIT,
+ 0,
+};
+
+static const struct reg_default tas2783_reg_defaults[] = {
+ // Default values for ROM mode. Activated.
+ { 0x8002, 0x1a},
+ { 0x800e, 0x44},
+ { 0x800f, 0x40},
+ { 0x8097, 0xc8},
+ { 0x80b5, 0x74},
+ { 0x8099, 0x20},
+ { 0xfe8d, 0x0d},
+ { 0xfebe, 0x4a},
+ { 0x8230, 0x00},
+ { 0x8231, 0x00},
+ { 0x8232, 0x00},
+ { 0x8233, 0x01},
+ { 0x8418, 0x00},
+ { 0x8419, 0x00},
+ { 0x841a, 0x00},
+ { 0x841b, 0x00},
+ { 0x8428, 0x40},
+ { 0x8429, 0x00},
+ { 0x842a, 0x00},
+ { 0x842b, 0x00},
+ { 0x8548, 0x00},
+ { 0x8549, 0x00},
+ { 0x854a, 0x00},
+ { 0x854b, 0x00},
+ { 0x8558, 0x40},
+ { 0x8559, 0x00},
+ { 0x855a, 0x00},
+ { 0x855b, 0x00},
+ { 0x800a, 0x3a},
+ { 0x800e, 0x44},
+ { 0x800f, 0x40},
+ { 0x805c, 0xd9},
+ { 0x8002, 0x00},
+};
+
+static bool tas2783_readable_register(struct device *dev,
+ unsigned int reg)
+{
+ switch (reg) {
+ case 0x8000 ... 0xc000: // Page 0 ~ 127.
+ case 0xfe80 ... 0xfeff: // Page 253.
+ case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_UDMPU21,
+ TAS2783_SDCA_CTL_UDMPU_CLUSTER, 0):
+ case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+ TAS2783_SDCA_CTL_FU_MUTE, CH_L):
+ case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+ TAS2783_SDCA_CTL_FU_MUTE, CH_R):
+ case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE23,
+ TAS2783_SDCA_CTL_REQ_POWER_STATE, 0):
+ case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE22,
+ TAS2783_SDCA_CTL_REQ_POWER_STATE, 0):
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool tas2783_volatile_register(struct device *dev,
+ unsigned int reg)
+{
+ switch (reg) {
+ case 0x8001:
+ // Only reset register was volatiled.
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config tasdevice_regmap = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .readable_reg = tas2783_readable_register,
+ .volatile_reg = tas2783_volatile_register,
+ .max_register = 0x41008000 + TASDEVICE_REG(0xa1, 0x60, 0x7f),
+ .reg_defaults = tas2783_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .use_single_read = true,
+ .use_single_write = true,
+};
+
+static int tas2783_sdw_read(void *context, const void *reg_buf,
+ const size_t reg_size, void *val_buf, size_t val_size)
+{
+ struct sdw_slave *peripheral = context;
+ u8 *buf8 = val_buf;
+ unsigned int reg, bytes;
+ int ret;
+
+ reg = le32_to_cpu(*(const __le32 *)reg_buf);
+ reg += TAS2783_SDW_ADDR_OFFSET;
+
+ while (val_size) {
+ /* to end of page */
+ bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR);
+ if (bytes > val_size)
+ bytes = val_size;
+
+ ret = sdw_nread_no_pm(peripheral, reg, bytes, buf8);
+ if (ret != 0) {
+ dev_err(&peripheral->dev, "Read @%#x..%#x:%d\n",
+ reg, reg + bytes - 1, ret);
+ return ret;
+ }
+
+ swab32_array((u32 *)buf8, bytes / 4);
+ val_size -= bytes;
+ reg += bytes;
+ buf8 += bytes;
+ }
+
+ return 0;
+}
+
+/* Convert for LSB or MSB. */
+static inline void tas2783_swab_copy(
+ void *dest, const void *src, size_t nbytes)
+{
+ u32 *dest32 = dest;
+ const u32 *src32 = src;
+
+ for (; nbytes > 0; nbytes -= 4)
+ *dest32++ = swab32(*src32++);
+}
+
+static int tas2783_sdw_gather_write(void *context, const void *reg_buf,
+ size_t reg_size, const void *val_buf, size_t val_size)
+{
+ struct sdw_slave *peripheral = context;
+ const u8 *src_be = val_buf;
+ u32 val_le_buf[64]; /* Define u32 so it is 32-bit aligned */
+ unsigned int reg, bytes;
+ int ret;
+
+ reg = le32_to_cpu(*(const __le32 *)reg_buf);
+
+ while (val_size) {
+ /* to end of page */
+ bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR);
+ if (bytes > val_size)
+ bytes = val_size;
+ if (bytes > sizeof(val_le_buf))
+ bytes = sizeof(val_le_buf);
+
+ tas2783_swab_copy(val_le_buf, src_be, bytes);
+
+ ret = sdw_nwrite_no_pm(peripheral, reg, bytes,
+ (u8 *)val_le_buf);
+ if (ret != 0) {
+ dev_err(&peripheral->dev, "Write @%#x..%#x:%d\n",
+ reg, reg + bytes - 1, ret);
+ return ret;
+ }
+
+ val_size -= bytes;
+ reg += bytes;
+ src_be += bytes;
+ }
+
+ return 0;
+}
+
+static int tas2783_sdw_write(
+ void *context, const void *val_buf, size_t val_size)
+{
+ const u8 *src_buf = val_buf;
+
+ /* First word of val_buf contains the destination address */
+ return tas2783_sdw_gather_write(context, &src_buf[0], 4,
+ &src_buf[4], val_size - 4);
+}
+
+static int tasdevice_clamp(int val, int max, unsigned int invert)
+{
+ if (val > max)
+ val = max;
+ if (invert)
+ val = max - val;
+ if (val < 0)
+ val = 0;
+ return val;
+}
+
+/*
+ * Registers are big-endian on I2C and SPI but little-endian on SoundWire.
+ * Exported firmware controls are big-endian on I2C/SPI but little-endian
+ * on SoundWire.
+ * Firmware files are always big-endian and are opaque blobs.
+ * Present a big-endian regmap and hide the endianness swap,
+ * so that the ALSA byte controls always have the same byte order,
+ * and firmware file blobs can be written verbatim.
+ */
+static const struct regmap_bus tas2783_regmap_bus_sdw = {
+ .read = tas2783_sdw_read,
+ .write = tas2783_sdw_write,
+ .gather_write = tas2783_sdw_gather_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static int tas2783_digital_getvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *codec
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int val;
+ unsigned int invert = mc->invert;
+ int max = mc->max;
+ int ret = 0;
+
+ /* Read the primary device as the whole */
+ ret = tasdevice_dev_read(tas_dev, &mc->reg, (unsigned int *)&val);
+ dev_dbg(tas_dev->dev, "%s, get digital vol %d from %x with %d\n",
+ __func__, val, mc->reg, ret);
+ if (ret) {
+ dev_err(tas_dev->dev, "%s, get digital vol error %x.\n",
+ __func__, ret);
+ goto out;
+ }
+
+ if (val > max)
+ val = max;
+ if (invert)
+ val = max - val;
+ if (val < 0)
+ val = 0;
+ ucontrol->value.integer.value[0] = val;
+
+out:
+ return ret;
+}
+
+static int tas2783_digital_putvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *codec
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int val, ret = 0;
+ unsigned int invert = mc->invert;
+ int max = mc->max;
+ unsigned char value = 0;
+
+ val = ucontrol->value.integer.value[0];
+ if (val > max)
+ val = max;
+ if (invert)
+ val = max - val;
+ if (val < 0)
+ val = 0;
+
+ value = (u8)val;
+ ret = sdw_nwrite_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value);
+ if (ret != 0) {
+ dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n",
+ mc->reg, val, ret);
+ return ret;
+ }
+ dev_dbg(tas_dev->dev, "%s, Put digital vol %d into %x.\n",
+ __func__, val, mc->reg);
+
+ return 1;
+}
+
+static int tas2783_amp_getvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *codec
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int val;
+ unsigned char mask = 0;
+ int max = mc->max;
+ int ret = 0;
+ unsigned int invert = mc->invert;
+ unsigned char value = 0;
+
+ /* Read the primary device */
+ ret = sdw_nread_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value);
+ dev_dbg(tas_dev->dev, "%s, get AMP vol %d from %x with %d\n",
+ __func__, value, mc->reg, ret);
+
+ mask = (1 << fls(mc->max)) - 1;
+ mask <<= mc->shift;
+ val = value;
+ val = (val & mask) >> mc->shift;
+ if (val > max)
+ val = max;
+ if (invert)
+ val = max - val;
+ if (val < 0)
+ val = 0;
+ ucontrol->value.integer.value[0] = val;
+
+ return ret;
+}
+
+static int tas2783_amp_putvol(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *codec
+ = snd_soc_kcontrol_component(kcontrol);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int val = 0, ret = 0, max = mc->max;
+ unsigned char mask = 0, value = 0;
+ unsigned int invert = mc->invert;
+
+ mask = (1 << fls(mc->max)) - 1;
+ mask <<= mc->shift;
+ val = tasdevice_clamp(ucontrol->value.integer.value[0], max,
+ invert);
+
+ ret = sdw_nread_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value);
+ if (ret != 0) {
+ dev_err(tas_dev->dev, "Read @%x.%x:%d\n",
+ mc->reg, value, ret);
+ return ret;
+ }
+ value &= (~TAS2783_AMP_LEVEL_MASK);
+ value |= (val << mc->shift);
+ ret = sdw_nwrite_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value);
+ if (ret != 0) {
+ dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n",
+ mc->reg, val, ret);
+ return ret;
+ }
+ dev_dbg(tas_dev->dev, "amp %x into 0x%08x by %lx shift %d.\n",
+ val, mc->reg, TAS2783_AMP_LEVEL_MASK, mc->shift);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new tas2783_snd_controls[] = {
+ SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL,
+ 1, 0, 20, 0, tas2783_amp_getvol,
+ tas2783_amp_putvol, amp_vol_tlv),
+ SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2783_DVC_LVL,
+ 0, 0, 200, 1, tas2783_digital_getvol,
+ tas2783_digital_putvol, dvc_tlv),
+};
+
+static void tas2783_apply_calib(
+ struct tasdevice_priv *tas_priv, unsigned int *cali_data)
+{
+ unsigned int reg_address = 0, i = 0;
+ unsigned int *reg_start;
+
+ if (!tas_priv->sdw_slave)
+ return;
+ if ((tas_priv->sdw_slave->id.unique_id < TAS2783_DEVICE_ID_START)
+ || (tas_priv->sdw_slave->id.unique_id > TAS2783_DEVICE_ID_END))
+ return;
+ reg_start = cali_data+(tas_priv->sdw_slave->id.unique_id -
+ TAS2783_DEVICE_ID_START)*TAS2783_CALIBRATION_SIZE;
+ while (tas2783_calibration_reg[i] != 0) {
+ reg_address = tas2783_calibration_reg[i];
+ tas2783_sdw_gather_write(tas_priv->sdw_slave,
+ ®_address, 4, reg_start+i, 4);
+ }
+}
+
+static int tas2783_calibration(struct tasdevice_priv *tas_priv)
+{
+ efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
+ 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
+ static efi_char16_t efi_name[] = L"CALI_DATA";
+ struct tm *tm = &tas_priv->tm;
+ unsigned int attr, crc;
+ unsigned int *tmp_val;
+ efi_status_t status;
+
+ tas_priv->cali_data.total_sz = 128;
+ /* Get real size of UEFI variable */
+ status = efi.get_variable(efi_name, &efi_guid, &attr,
+ &tas_priv->cali_data.total_sz, tas_priv->cali_data.data);
+ dev_dbg(tas_priv->dev, "cali get %lx bytes with result : %ld\n",
+ tas_priv->cali_data.total_sz, status);
+ if (status == EFI_BUFFER_TOO_SMALL) {
+ status = efi.get_variable(efi_name, &efi_guid, &attr,
+ &tas_priv->cali_data.total_sz,
+ tas_priv->cali_data.data);
+ dev_dbg(tas_priv->dev, "cali get %lx bytes result:%ld\n",
+ tas_priv->cali_data.total_sz, status);
+ }
+ for (int i = 0; i < tas_priv->cali_data.total_sz; i += 4) {
+ dev_dbg(tas_priv->dev, "cali get %02x %02x %02x %02x",
+ tas_priv->cali_data.data[i],
+ tas_priv->cali_data.data[i+1],
+ tas_priv->cali_data.data[i+2],
+ tas_priv->cali_data.data[i+3]);
+ }
+
+ tmp_val = (unsigned int *)tas_priv->cali_data.data;
+
+ crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0;
+ dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n",
+ crc, tmp_val[21]);
+
+ if (crc == tmp_val[21]) {
+ time64_to_tm(tmp_val[20], 0, tm);
+ dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+ tas2783_apply_calib(tas_priv, tmp_val);
+ } else {
+ dev_dbg(tas_priv->dev, "CRC error!\n");
+ tas_priv->cali_data.total_sz = 0;
+ }
+
+ return 0;
+}
+
+static void tasdevice_rca_ready(const struct firmware *fmw, void *context)
+{
+ struct tasdevice_priv *tas_dev =
+ (struct tasdevice_priv *) context;
+ struct MYSWFTFile *p;
+ unsigned char *buf = NULL, value_sdw;
+ int offset = 0, i = 0, num_files = 0, img_sz = 0;
+ int ret = 0;
+
+ mutex_lock(&tas_dev->codec_lock);
+
+ if (!fmw || !fmw->data) {
+ dev_err(tas_dev->dev,
+ "Failed to read %s, no side - effect on driver running\n",
+ tas_dev->rca_binaryname);
+ ret = -1;
+ goto out;
+ }
+ buf = (unsigned char *)fmw->data;
+
+ img_sz = SMS_HTONL(buf[offset+3], buf[offset + 2],
+ buf[offset + 1], buf[offset]);
+ dev_dbg(tas_dev->dev, "Got %x:%lx.\n", img_sz, fmw->size);
+ offset += sizeof(img_sz);
+ if (img_sz != fmw->size) {
+ dev_err(tas_dev->dev,
+ "Size not match, %d %u", (int)fmw->size, img_sz);
+ ret = -1;
+ goto out;
+ }
+
+ while ((offset < img_sz) && (num_files < MAX_NO_FILES)) {
+ p = (struct MYSWFTFile *)(buf + offset);
+ tas_dev->m_swftFile[num_files].m_vendor_id =
+ p->m_vendor_id;
+ tas_dev->m_swftFile[num_files].m_file_id = p->m_file_id;
+ tas_dev->m_swftFile[num_files].m_version = p->m_version;
+ tas_dev->m_swftFile[num_files].m_Length = p->m_Length;
+ tas_dev->m_swftFile[num_files].m_downloadAddr =
+ p->m_downloadAddr;
+ tas_dev->m_swftFile[num_files].m_startAdress =
+ ((char *)p) + sizeof(unsigned int)*5;
+
+ ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral,
+ tas_dev->m_swftFile[num_files].m_downloadAddr,
+ tas_dev->m_swftFile[num_files].m_Length,
+ tas_dev->m_swftFile[num_files].m_startAdress);
+ dev_dbg(tas_dev->dev, "Write %x into %x result : %d\n",
+ tas_dev->m_swftFile[num_files].m_Length,
+ tas_dev->m_swftFile[num_files].m_downloadAddr,
+ ret);
+
+ dev_dbg(tas_dev->dev, "Write %d :%x:%x:%x:%x:%x:%x.\n",
+ num_files,
+ tas_dev->m_swftFile[num_files].m_vendor_id,
+ tas_dev->m_swftFile[num_files].m_file_id,
+ tas_dev->m_swftFile[num_files].m_version,
+ tas_dev->m_swftFile[num_files].m_Length,
+ tas_dev->m_swftFile[num_files].m_downloadAddr,
+ tas_dev->m_swftFile[num_files].m_startAdress[0]);
+
+ ret = sdw_nread_no_pm(tas_dev->sdw_peripheral,
+ tas_dev->m_swftFile[num_files].m_downloadAddr,
+ 1, &value_sdw);
+ dev_dbg(tas_dev->dev, "Got block %d :%x.\n",
+ num_files, value_sdw);
+
+ offset += sizeof(unsigned int)*5 + p->m_Length;
+ num_files++;
+ }
+
+ i = 0x50;
+ while (i < 0x56) {
+ ret = sdw_nread_no_pm(tas_dev->sdw_peripheral, i, 1,
+ &value_sdw);
+ dev_dbg(tas_dev->dev, "Got device id:%x\n", value_sdw);
+ i++;
+ }
+ tas2783_calibration(tas_dev);
+
+out:
+ mutex_unlock(&tas_dev->codec_lock);
+ if (fmw)
+ release_firmware(fmw);
+}
+
+static void tasdevice_config_info_remove(void *context)
+{
+ struct tasdevice_priv *tas_dev =
+ (struct tasdevice_priv *) context;
+ dev_dbg(tas_dev->dev, "%s was performed\n", __func__);
+}
+
+static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *codec =
+ snd_soc_dapm_to_component(w->dapm);
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ int state = 1;
+
+ /* Codec Lock Hold */
+ mutex_lock(&tas_dev->codec_lock);
+ dev_dbg(tas_dev->dev, "dapm event : %x\n", event);
+ if (event == SND_SOC_DAPM_PRE_PMD)
+ state = 0;
+ /* Codec Lock Release*/
+ mutex_unlock(&tas_dev->codec_lock);
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM,
+ 0, 0, tasdevice_dapm_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event),
+ SND_SOC_DAPM_OUTPUT("OUT"),
+ SND_SOC_DAPM_INPUT("DMIC")
+};
+
+static const struct snd_soc_dapm_route tasdevice_audio_map[] = {
+ {"SPK", NULL, "ASI"},
+ {"OUT", NULL, "SPK"},
+ {"ASI OUT", NULL, "DMIC"}
+};
+
+static int tasdevice_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int ret = 0;
+
+ return ret;
+}
+
+static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct tasdevice_priv *tas_dev =
+ snd_soc_dai_get_drvdata(codec_dai);
+
+ tas_dev->sysclk = freq;
+
+ return 0;
+}
+
+static int tasdevice_set_sdw_stream(
+ struct snd_soc_dai *dai, void *sdw_stream, int direction)
+{
+ struct sdw_stream_data *stream;
+
+ if (!sdw_stream)
+ return 0;
+
+ stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+ if (!stream)
+ return -ENOMEM;
+
+ stream->sdw_stream = sdw_stream;
+
+ /* Use tx_mask or rx_mask to set dma_data */
+ snd_soc_dai_dma_data_set(dai, direction, stream);
+
+ return 0;
+}
+
+static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct sdw_stream_data *stream;
+
+ stream = snd_soc_dai_get_dma_data(dai, substream);
+ snd_soc_dai_set_dma_data(dai, substream, NULL);
+ kfree(stream);
+}
+
+static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tasdevice =
+ snd_soc_component_get_drvdata(component);
+ struct sdw_stream_config stream_config = {0};
+ struct sdw_port_config port_config = {0};
+ struct sdw_stream_data *stream;
+ int retval;
+
+ dev_dbg(dai->dev, "%s %s", __func__, dai->name);
+ stream = snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!stream)
+ return -EINVAL;
+
+ if (!tasdevice->sdw_slave)
+ return -EINVAL;
+
+ /* SoundWire specific configuration */
+ snd_sdw_params_to_config(substream, params,
+ &stream_config, &port_config);
+
+ /* port 1 for playback */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ port_config.num = 1;
+ else
+ port_config.num = 2;
+
+ retval = sdw_stream_add_slave(tasdevice->sdw_slave,
+ &stream_config, &port_config, 1, stream->sdw_stream);
+ if (retval) {
+ dev_err(dai->dev, "Unable to configure port\n");
+ return retval;
+ }
+
+ return 0;
+}
+
+static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tasdevice =
+ snd_soc_component_get_drvdata(component);
+ struct sdw_stream_data *stream =
+ snd_soc_dai_get_dma_data(dai, substream);
+
+ if (!tasdevice->sdw_slave)
+ return -EINVAL;
+
+ sdw_stream_remove_slave(tasdevice->sdw_slave, stream->sdw_stream);
+ return 0;
+}
+
+static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
+ int direction)
+{
+ struct snd_soc_component *component = dai->component;
+ struct tasdevice_priv *tasdevice =
+ snd_soc_component_get_drvdata(component);
+ int ret = 0;
+ unsigned char value_sdw = 0;
+
+ dev_dbg(tasdevice->dev, "%s: mute %d, %d\n",
+ __func__, mute, direction);
+ if (mute == 0) {// Unmute.
+ // FU21 Unmute
+ value_sdw = 0;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ SDW_SDCA_CTL(1, 1, 1, 0), 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %lx %x\n",
+ SDW_SDCA_CTL(1, 1, 1, 0), ret);
+ value_sdw = 0;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40400090, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %x\n", ret);
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40402090, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %x\n", ret);
+
+ // FU23 Unmute
+ value_sdw = 0;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ SDW_SDCA_CTL(1, 2, 1, 0), 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %lx %x\n",
+ SDW_SDCA_CTL(1, 2, 1, 0), ret);
+ value_sdw = 0;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40400108, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %x\n", ret);
+ value_sdw = 0;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x8002, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "Unmuted %x\n", ret);
+ } else {
+ // FU21 mute
+ value_sdw = 1;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ SDW_SDCA_CTL(1, 1, 1, 0), 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %lx %x\n",
+ SDW_SDCA_CTL(1, 1, 1, 0), ret);
+ value_sdw = 1;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40400090, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %x\n", ret);
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40402090, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %x\n", ret);
+ // FU23 mute
+ value_sdw = 1;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ SDW_SDCA_CTL(1, 2, 1, 0), 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %lx %x\n",
+ SDW_SDCA_CTL(1, 2, 1, 0), ret);
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x40400108, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %x\n", ret);
+ value_sdw = 0x1a;
+ ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral,
+ 0x8002, 1, &value_sdw);
+ dev_dbg(tasdevice->dev, "muted %x\n", ret);
+ }
+
+ if (!tasdevice->sdw_slave)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops tasdevice_dai_ops = {
+ .startup = tasdevice_startup,
+ .mute_stream = tasdevice_mute,
+ .hw_params = tasdevice_sdw_hw_params,
+ .set_sysclk = tasdevice_set_dai_sysclk,
+ .hw_free = tasdevice_sdw_pcm_hw_free,
+ .set_stream = tasdevice_set_sdw_stream,
+ .shutdown = tasdevice_sdw_shutdown,
+};
+
+static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
+ {
+ .name = "tas2783_codec",
+ .id = 0,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 4,
+ .rates = TASDEVICE_RATES,
+ .formats = TASDEVICE_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = TASDEVICE_RATES,
+ .formats = TASDEVICE_FORMATS,
+ },
+ .ops = &tasdevice_dai_ops,
+ .symmetric_rate = 1,
+ },
+};
+
+static void tas2783_reset(struct tasdevice_priv *tas_dev)
+{
+ int ret = 0;
+ unsigned char value_sdw;
+
+ value_sdw = TAS2873_REG_SWRESET_RESET;
+ ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral,
+ TAS2873_REG_SWRESET, 1, &value_sdw);
+ dev_dbg(tas_dev->dev, "%s TAS2783 was reseted.\n", __func__);
+ usleep_range(1000, 1050);
+}
+
+static int tasdevice_codec_probe(struct snd_soc_component *codec)
+{
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ int ret = 0;
+
+ dev_dbg(tas_dev->dev, "%s called for TAS2783 start.\n",
+ __func__);
+ /* Codec Lock Hold */
+ mutex_lock(&tas_dev->codec_lock);
+
+ crc8_populate_msb(tas_dev->crc8_lkp_tbl,
+ TASDEVICE_CRC8_POLYNOMIAL);
+ tas_dev->codec = codec;
+
+ scnprintf(tas_dev->rca_binaryname, 64, "MY_SWFT_x%01x.bin",
+ tas_dev->sdw_peripheral->id.unique_id);
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+ tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL,
+ tas_dev, tasdevice_rca_ready);
+ dev_dbg(tas_dev->dev,
+ "%s: request_firmware %x open status: 0x%08x\n",
+ __func__, tas_dev->sdw_peripheral->id.unique_id, ret);
+
+ /* Codec Lock Release*/
+ mutex_unlock(&tas_dev->codec_lock);
+
+ tas2783_reset(tas_dev);
+
+ dev_dbg(tas_dev->dev, "%s was called end.\n", __func__);
+ return ret;
+}
+
+static void tasdevice_deinit(void *context)
+{
+ struct tasdevice_priv *tas_dev =
+ (struct tasdevice_priv *) context;
+
+ tasdevice_config_info_remove(tas_dev);
+}
+
+static void tasdevice_codec_remove(
+ struct snd_soc_component *codec)
+{
+ struct tasdevice_priv *tas_dev =
+ snd_soc_component_get_drvdata(codec);
+ /* Codec Lock Hold */
+ mutex_lock(&tas_dev->codec_lock);
+ tasdevice_deinit(tas_dev);
+ /* Codec Lock Release*/
+ mutex_unlock(&tas_dev->codec_lock);
+}
+
+static const struct snd_soc_component_driver
+ soc_codec_driver_tasdevice = {
+ .probe = tasdevice_codec_probe,
+ .remove = tasdevice_codec_remove,
+ .controls = tas2783_snd_controls,
+ .num_controls = ARRAY_SIZE(tas2783_snd_controls),
+ .dapm_widgets = tasdevice_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets),
+ .dapm_routes = tasdevice_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map),
+ .idle_bias_on = 1,
+ .endianness = 1,
+};
+
+int tasdevice_dev_read(struct tasdevice_priv *tas_dev, unsigned int *reg,
+ unsigned int *val)
+{
+ int ret = 0;
+
+ mutex_lock(&tas_dev->dev_lock);
+ ret = tas2783_sdw_read(tas_dev->sdw_peripheral,
+ reg, 4, (void *)val, 4);
+ dev_dbg(tas_dev->dev, "%s, read %x from reg %x. Result is (%d)\n",
+ __func__, *val, *reg, ret);
+ mutex_unlock(&tas_dev->dev_lock);
+ return ret;
+}
+
+static int tasdevice_init(struct tasdevice_priv *tas_dev)
+{
+ int ret = 0;
+
+ tas_dev->cur_prog = -1;
+ tas_dev->cur_conf = -1;
+
+ dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
+ mutex_init(&tas_dev->dev_lock);
+
+ dev_set_drvdata(tas_dev->dev, tas_dev);
+
+ mutex_init(&tas_dev->codec_lock);
+ ret = devm_snd_soc_register_component(tas_dev->dev,
+ &soc_codec_driver_tasdevice,
+ tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
+ if (ret) {
+ dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n",
+ __func__, ret);
+ }
+ dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__);
+
+ return ret;
+}
+
+static int tasdevice_read_prop(struct sdw_slave *slave)
+{
+ struct sdw_slave_prop *prop = &slave->prop;
+ int nval;
+ int i, j;
+ u32 bit;
+ unsigned long addr;
+ struct sdw_dpn_prop *dpn;
+
+ prop->scp_int1_mask =
+ SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+ prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+
+ prop->paging_support = true;
+
+ /* first we need to allocate memory for set bits in port lists */
+ prop->source_ports = 0x04; /* BITMAP: 00000100 */
+ prop->sink_ports = 0x2; /* BITMAP: 00000010 */
+
+ nval = hweight32(prop->source_ports);
+ prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+ sizeof(*prop->src_dpn_prop), GFP_KERNEL);
+ if (!prop->src_dpn_prop)
+ return -ENOMEM;
+
+ i = 0;
+ dpn = prop->src_dpn_prop;
+ addr = prop->source_ports;
+ for_each_set_bit(bit, &addr, 32) {
+ dpn[i].num = bit;
+ dpn[i].type = SDW_DPN_FULL;
+ dpn[i].simple_ch_prep_sm = true;
+ dpn[i].ch_prep_timeout = 10;
+ i++;
+ }
+
+ /* do this again for sink now */
+ nval = hweight32(prop->sink_ports);
+ prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+ sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
+ if (!prop->sink_dpn_prop)
+ return -ENOMEM;
+
+ j = 0;
+ dpn = prop->sink_dpn_prop;
+ addr = prop->sink_ports;
+ for_each_set_bit(bit, &addr, 32) {
+ dpn[j].num = bit;
+ dpn[j].type = SDW_DPN_FULL;
+ dpn[j].simple_ch_prep_sm = true;
+ dpn[j].ch_prep_timeout = 10;
+ j++;
+ }
+
+ /* set the timeout values */
+ prop->clk_stop_timeout = 20;
+
+ dev_dbg(&slave->dev, "%s was performed.\n", __func__);
+
+ return 0;
+}
+
+static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave)
+{
+ struct tasdevice_priv *tasdevice = dev_get_drvdata(dev);
+
+ if (tasdevice->hw_init)
+ return 0;
+
+ if (tasdevice->first_hw_init) {
+ regcache_cache_only(tasdevice->regmap, false);
+ regcache_cache_bypass(tasdevice->regmap, true);
+ } else {
+ /* PM runtime is only enabled when
+ * a Slave reports as Attached
+ * set autosuspend parameters
+ */
+ pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
+ pm_runtime_use_autosuspend(&slave->dev);
+
+ /* update count of parent 'active' children */
+ pm_runtime_set_active(&slave->dev);
+
+ /* make sure the device does not suspend immediately */
+ pm_runtime_mark_last_busy(&slave->dev);
+
+ pm_runtime_enable(&slave->dev);
+ }
+
+ pm_runtime_get_noresume(&slave->dev);
+
+ if (tasdevice->first_hw_init) {
+ regcache_cache_bypass(tasdevice->regmap, false);
+ regcache_mark_dirty(tasdevice->regmap);
+ } else
+ tasdevice->first_hw_init = true;
+
+ /* Mark Slave initialization complete */
+ tasdevice->hw_init = true;
+
+ pm_runtime_mark_last_busy(&slave->dev);
+ pm_runtime_put_autosuspend(&slave->dev);
+
+ dev_dbg(&slave->dev, "%s hw_init complete\n", __func__);
+ return 0;
+}
+
+static int tasdevice_update_status(struct sdw_slave *slave,
+ enum sdw_slave_status status)
+{
+ struct tasdevice_priv *tasdevice = dev_get_drvdata(&slave->dev);
+
+ /* Update the status */
+ tasdevice->status = status;
+
+ if (status == SDW_SLAVE_UNATTACHED)
+ tasdevice->hw_init = false;
+
+ /* Perform initialization only if slave status
+ * is present and hw_init flag is false
+ */
+ if (tasdevice->hw_init || tasdevice->status != SDW_SLAVE_ATTACHED)
+ return 0;
+
+ /* perform I/O transfers required for Slave initialization */
+ return tasdevice_io_init(&slave->dev, slave);
+}
+
+/*
+ * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
+ * port_prep are not defined for now
+ */
+static const struct sdw_slave_ops tasdevice_sdw_ops = {
+ .read_prop = tasdevice_read_prop,
+ .update_status = tasdevice_update_status,
+};
+
+static void tasdevice_remove(struct tasdevice_priv *tas_dev)
+{
+ snd_soc_unregister_component(tas_dev->dev);
+ if (gpio_is_valid(tas_dev->rst_gpio))
+ gpio_free(tas_dev->rst_gpio);
+
+ if (gpio_is_valid(tas_dev->irq_info.irq_gpio))
+ gpio_free(tas_dev->irq_info.irq_gpio);
+
+ mutex_destroy(&tas_dev->dev_lock);
+ mutex_destroy(&tas_dev->codec_lock);
+}
+
+static int tasdevice_sdw_probe(struct sdw_slave *peripheral,
+ const struct sdw_device_id *id)
+{
+ struct device *dev = &peripheral->dev;
+ struct tasdevice_priv *tas_dev;
+ int ret = 0;
+
+ dev_dbg(dev, "%s was called for TAS2783.\n", __func__);
+
+ tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL);
+ if (!tas_dev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ tas_dev->dev = &peripheral->dev;
+ tas_dev->sdw_peripheral = peripheral;
+ tas_dev->chip_id = id->driver_data;
+ tas_dev->sdw_slave = peripheral;
+ tas_dev->hw_init = false;
+ tas_dev->first_hw_init = false;
+
+ dev_dbg(dev, "%d chip id %x for TAS2783.\n",
+ peripheral->id.unique_id, tas_dev->chip_id);
+
+ dev_set_drvdata(dev, tas_dev);
+
+ tas_dev->regmap = devm_regmap_init(dev, &tas2783_regmap_bus_sdw,
+ peripheral, &tasdevice_regmap);
+ if (IS_ERR(tas_dev->regmap)) {
+ ret = PTR_ERR(tas_dev->regmap);
+ dev_err(dev, "Failed devm_regmap_init: %d\n", ret);
+ goto out;
+ }
+ ret = tasdevice_init(tas_dev);
+
+out:
+ if (ret < 0 && tas_dev != NULL)
+ tasdevice_remove(tas_dev);
+
+ dev_dbg(dev, "%s was called for TAS2783.\n", __func__);
+ return ret;
+
+}
+
+static int tasdevice_sdw_remove(struct sdw_slave *peripheral)
+{
+ struct tasdevice_priv *tas_dev =
+ dev_get_drvdata(&peripheral->dev);
+
+ if (tas_dev)
+ tasdevice_remove(tas_dev);
+
+ return 0;
+}
+
+static const struct sdw_device_id tasdevice_sdw_id[] = {
+ SDW_SLAVE_ENTRY(0x0102, 0x0, 0),
+ {},
+};
+MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id);
+
+static struct sdw_driver tasdevice_sdw_driver = {
+ .driver = {
+ .name = "slave-tas2783",
+ },
+ .probe = tasdevice_sdw_probe,
+ .remove = tasdevice_sdw_remove,
+ .ops = &tasdevice_sdw_ops,
+ .id_table = tasdevice_sdw_id,
+};
+
+module_sdw_driver(tasdevice_sdw_driver);
+
+MODULE_AUTHOR("Baojun Xu <baojun.xu@...com>");
+MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h
new file mode 100644
index 000000000000..0fa5b3855b51
--- /dev/null
+++ b/sound/soc/codecs/tas2783.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated
+ * https://www.ti.com
+ *
+ * The TAS2783 driver implements a flexible and configurable
+ * algo coff setting for single TAS2783 chips.
+ *
+ * Author: Baojun Xu <baojun.xu@...com>
+ */
+
+#ifndef __TAS2783_H__
+#define __TAS2783_H__
+
+#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | \
+ SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_88200)
+#define TAS2783_SDW_ADDR_OFFSET 0x8000
+
+#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+/* BOOK, PAGE Control Register */
+#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 +\
+ (page * 128) + reg)
+
+/*Software Reset */
+#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01)
+#define TAS2873_REG_SWRESET_RESET BIT(0)
+
+/* Volume control */
+#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1A)
+#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03)
+#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1)
+
+/* Calibration data */
+#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74)
+#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14)
+#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c)
+#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x0d, 0x3c)
+#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c)
+
+#define TAS2783_CALIBRATION_SIZE 5 // int data number.
+
+#define TAS2783_DEVICE_ID_START 0x08 // Unique id start
+#define TAS2783_DEVICE_ID_END 0x0F // Unique id end
+
+/* TAS2783 SDCA Control - function number */
+#define FUNC_NUM_SMART_AMP 0x01
+
+/* TAS2783 SDCA entity */
+#define TAS2783_SDCA_ENT_PDE23 0x0C
+#define TAS2783_SDCA_ENT_PDE22 0x0B
+#define TAS2783_SDCA_ENT_FU21 0x01
+#define TAS2783_SDCA_ENT_UDMPU21 0x10
+
+/* TAS2783 SDCA control */
+#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01
+#define TAS2783_SDCA_CTL_FU_MUTE 0x01
+#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10
+
+#define CH_L 1
+#define CH_R 2
+
+#define TASDEVICE_CRC8_POLYNOMIAL 0x4d
+
+#define MAX_NO_FILES 100
+#define MAX_CALIBRATION_DATA_SIZE 252
+
+#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \
+ (((b)&0x000000FF)<<16) | \
+ (((c)&0x000000FF)<<8) | \
+ ((d)&0x000000FF))
+
+enum channel {
+ top_left_Chn,
+ top_right_chn,
+ bottom_left_Chn,
+ bottom_right_chn,
+ max_chn,
+};
+
+struct tasdevice {
+ unsigned int dev_addr;
+ unsigned int err_code;
+ short cur_prog;
+ short cur_conf;
+ bool is_loading;
+ bool is_loaderr;
+ bool is_calibrated_data_loaded;
+ unsigned char cur_book;
+ struct tasdevice_fw *cali_data_fmw;
+};
+
+struct MYSWFTFile {
+ unsigned int m_vendor_id;
+ unsigned int m_file_id;
+ unsigned int m_version;
+ unsigned int m_Length;
+ unsigned int m_downloadAddr;
+ unsigned char *m_startAdress;
+};
+
+/*
+ * This item is used to store the generic i2c address of
+ * all the tas2781 devices for I2C broadcast during the multi-device
+ * writes, useless in mono case.
+ */
+struct global_addr {
+ unsigned char cur_book;
+ unsigned int dev_addr;
+ int ref_cnt;
+};
+
+struct calibration_data {
+ unsigned long total_sz;
+ unsigned char data[MAX_CALIBRATION_DATA_SIZE];
+};
+
+struct tas_control {
+ struct snd_kcontrol_new *tasdevice_profile_controls;
+ int nr_controls;
+};
+
+struct tasdevice_irqinfo {
+ int irq_gpio;
+ int irq;
+};
+
+struct tasdevice_priv {
+ struct device *dev;
+ struct snd_soc_component *component;
+ struct sdw_slave *sdw_slave;
+ enum sdw_slave_status status;
+ struct sdw_bus_params params;
+ struct regmap *regmap;
+ struct mutex codec_lock;
+ struct mutex dev_lock;
+ int rst_gpio;
+ struct tasdevice tasdevice[max_chn];
+ struct tasdevice_fw *fmw;
+ struct tasdevice_irqinfo irq_info;
+ struct tas_control tas_ctrl;
+ struct sdw_slave *sdw_peripheral;
+ struct global_addr glb_addr;
+ struct calibration_data cali_data;
+ struct tm tm;
+ int cur_prog;
+ int cur_conf;
+ unsigned int chip_id;
+ bool hw_init;
+ bool first_hw_init;
+ unsigned char *bq_params;
+ unsigned int magic_num;
+ unsigned char ndev;
+ unsigned char dev_name[32];
+ unsigned char rca_binaryname[64];
+ unsigned char coef_binaryname[64];
+ unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE];
+
+ struct MYSWFTFile m_swftFile[MAX_NO_FILES];
+
+ void *codec;
+ unsigned int sysclk;
+ bool is_glb_calibrated_data_loaded;
+};
+
+struct sdw_stream_data {
+ struct sdw_stream_runtime *sdw_stream;
+};
+
+int tasdevice_dev_read(struct tasdevice_priv *tasdevice,
+ unsigned int *reg, unsigned int *value);
+
+#endif /*__TAS2783_H__ */
--
2.34.1
Powered by blists - more mailing lists