[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <169089906853.212423.17095176293160428610.kvalo@kernel.org>
Date: Tue, 1 Aug 2023 14:11:10 +0000 (UTC)
From: Kalle Valo <kvalo@...nel.org>
To: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org,
jernej.skrabec@...il.com, pkshih@...ltek.com,
ulf.hansson@...aro.org, tony0620emma@...il.com,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
"Lukas F . Hartmann" <lukas@...re.com>
Subject: Re: [PATCH] wifi: rtw88: sdio: Honor the host max_req_size in the RX
path
Martin Blumenstingl <martin.blumenstingl@...glemail.com> wrote:
> Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes
> with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth
> combo card. The error he observed is identical to what has been fixed
> in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST
> bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem.
>
> Lukas found that disabling or limiting RX aggregation fix the problem
> for him. In the following discussion a few key topics have been
> discussed which have an impact on this problem:
> - The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller
> which prevents DMA transfers. Instead all transfers need to go through
> the controller SRAM which limits transfers to 1536 bytes
> - rtw88 chips don't split incoming (RX) packets, so if a big packet is
> received this is forwarded to the host in it's original form
> - rtw88 chips can do RX aggregation, meaning more multiple incoming
> packets can be pulled by the host from the card with one MMC/SDIO
> transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH
> register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will
> be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation
> and BIT_EN_PRE_CALC makes the chip honor the limits more effectively)
>
> Use multiple consecutive reads in rtw_sdio_read_port() to limit the
> number of bytes which are copied by the host from the card in one
> MMC/SDIO transfer. This allows receiving a buffer that's larger than
> the hosts max_req_size (number of bytes which can be transferred in
> one MMC/SDIO transfer). As a result of this the skb_over_panic error
> is gone as the rtw88 driver is now able to receive more than 1536 bytes
> from the card (either because the incoming packet is larger than that
> or because multiple packets have been aggregated).
>
> Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
> Reported-by: Lukas F. Hartmann <lukas@...re.com>
> Closes: https://lore.kernel.org/linux-wireless/CAFBinCBaXtebixKbjkWKW_WXc5k=NdGNaGUjVE8NCPNxOhsb2g@mail.gmail.com/
> Suggested-by: Ping-Ke Shih <pkshih@...ltek.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> Reviewed-by: Ping-Ke Shih <pkshih@...ltek.com>
Ping, should I take or drop the patch? It wasn't quite clear for me.
--
https://patchwork.kernel.org/project/linux-wireless/patch/20230709195712.603200-1-martin.blumenstingl@googlemail.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Powered by blists - more mailing lists