[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230802-jailer-pavilion-84fb17bb3710@wendy>
Date: Wed, 2 Aug 2023 08:22:10 +0100
From: Conor Dooley <conor.dooley@...rochip.com>
To: Yinbo Zhu <zhuyinbo@...ngson.cn>
CC: Conor Dooley <conor@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Jianmin Lv <lvjianmin@...ngson.cn>,
<wanghongliang@...ngson.cn>, Liu Peibao <liupeibao@...ngson.cn>,
<loongson-kernel@...ts.loongnix.cn>
Subject: Re: [PATCH v2 1/2] gpio: dt-bindings: add parsing of loongson gpio
offset
On Wed, Aug 02, 2023 at 09:38:34AM +0800, Yinbo Zhu wrote:
>
>
> 在 2023/8/1 下午11:54, Conor Dooley 写道:
> > On Tue, Aug 01, 2023 at 04:34:30PM +0800, Yinbo Zhu wrote:
> > >
> > >
> > > 在 2023/8/1 下午3:23, Conor Dooley 写道:
> > > > On Tue, Aug 01, 2023 at 02:39:49PM +0800, Yinbo Zhu wrote:
> > > > >
> > > > >
> > > > > 在 2023/7/31 下午11:55, Conor Dooley 写道:
> > > > > > On Mon, Jul 31, 2023 at 05:10:58PM +0800, Yinbo Zhu wrote:
> > > > > > > Add parsing GPIO configure, input, output, interrupt register offset
> > > > > > > address and GPIO control mode support.
> > > > > >
> > > > > > This reeks of insufficient use of SoC specific compatibles. Do GPIO
> > > > > > controllers on the same SoC have different register offsets?
> > > > >
> > > > >
> > > > > Yes,
> > > > >
> > > > > > Where are the users for this?
> > > > >
> > > > >
> > > > > For example, ls2k500 contains multiple GPIO chips with different
> > > > > (configure, input, output, interrupt) offset addresses, but all others
> > > > > are the same.
> > > >
> > > > Right. That's admittedly not what I expected to hear! Can you firstly
> > > > explain this in the commit message,
> > >
> > >
> > > I will add following explain in the commit message. Do you think it's
> > > suitable?
> > >
> > > Loongson GPIO controllers come in multiple variants that are compatible
> > > except for certain register offset values. Add support in yaml file for
> > > device properties allowing to specify them in DT.
> >
> > Sure, that would be helpful.
> >
> > > > and secondly add a soc-specific
> > > > compatible for the ls2k500 and only allow these properties on that SoC?
> >
> > > Sorry, I may not have described it clearly before, the ls2k500 was only
> > > as a example, actually, Loongson GPIO controllers (2k500,2k1000,eg)come
> > > in multiple variants that are compatible except for certain register
> > > offset values. So above all offset device property was used to in all
> > > loongson gpio controller.
> >
> > But it would be good to know why they are different. Do they each
> > support some different features, or was there some other reason for
> > making controllers like this?
>
>
> There are no other reasons, just differences in these offset addresses.
Huh. Do you have a link to a devicetree for the ls2k500?
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists